Hope2SleepGuide

Sleep Apnoea Forum Bringing Help + Support to the Patient

Dreamstation humidifier heated hose and simplus 'mask type' settings

Hi Everyone,

I have recently purchased and started to use a heated hose with my dream station humidifier as my unheated hose used to 'bubble and gurgle' with condensation and also wet my face, even on a 2 or 3 setting and even when I used a hose cover.

The heated hose must be working as I have had no condensation in the tube or in my mask. However, the hose does not feel 'warm to the touch'. Is this normal? As my bedroom is very cool and I  suffer with a very dry mouth (I am primarily a mouth breather) I have  the hose and heater settings at 5 and my mouth is still very dry but more tolerable than before.

  Also, a daft question - for comfort reasons is it ok to put my hose cover on the heated hose?

I have a simplus full face mask - what 'mask type' resistance setting do I need to enter on my machine, which has settings from 1-5. From internet research x1 seems to the most common opinion.

Re 'Flex' - setting I currently have it on 2, having reduced it from 3 because I found it more comfortable to breathe at this setting. Will this reduction affect my AHI's?

A lot of questions from a newbie but it is another 2 weeks before my next review.

Thanks

John

Views: 74

Reply to This

Replies to This Discussion

Hi John,

The heated hose will just be warn and not hot enough to really feel it, so it is quite normal that you will not feel it warm.

Humidifier and heated hose settings is something you just have to play around with to get right for yourself.  Give yourself enough humidity and adjust the hose to stop condensation.  Everyone ends up with different settings.

I see no reason why you can't cover the hose, but why not just turn up the humidity and adjust it so it feel humid without condensation appearing in the hose.

The mask settings for the machine I have no idea.  Most machines just have a setting for Nasal Pillows, Nasal mask or Full-faced masks.  Maybe someone else will answer this.

3 is the mast pressure relief, reducing it to 2 will improve things, if you turn it off altogether it will be even better, however, if you need it you need it.  Most Apnoeas happen when breathing in and not out, so having it on is not a big problem.

Maybe you need to ask more questions here then.  Though you might get more than one answer.

Thank you for your answers. They are really helpful.

The humidifier situation is really costing me a lot of sleep as I keep waking to adjust settings and check the temperature of the water. I am not sure if it is working properly or not. I get a really dry mouth and itchy nose with no humidity. My bedroom is cold at night as we have solid wooden floors. I have tried the humidifier at lots of different settings from 2 up to 5. The first hour or two of use seems to be ok then the humidifier and heated hose seem to turn themselves off. The other night I got up after 3 - 4 hours and the water in the humidifier was cold. How hot should the humidifier bath get? Should it produce a steam vapour to inhale? The hottest it seems to get is between tepid and hot.

It seemed to work better with the unheated hose but condensation was a problem.

I am not sure about the dream station, but if the humidifier has an AUTO setting, put it on manual.

I just looked up the manual and it has an adaptive setting, turn this setting off and work the temperature settings manually, the adaptive settings do not work all that well, most people still complain they feel to dry and there is not enough humidification.

http://incenter.medical.philips.com/doclib/enc/11405972/DreamStatio...

Page 13 of the manual.

If the above does not appear as a link copy and paste it into your browser.

Hi Sleep to snore,

Thanks once again for your support. I have turned the adaptive setting off and defaulted to fixed. The sleep clinic also recommended this. I went to sleep with the hose on 2 and humidifier on 3. When I woke up about 4 hours later the humidifier was stone cold. I reset the heated hose and humidifier settings at 5 and it stayed on till I woke up.

 This does not result in 'wet face' and I find it comfortable.

Maybe I need to try a different mask. I will discuss it with the sleep clinic.

 

Regards,

John

It is very much a setting of your own choice, I also found the lower settings did very littel.

You just have to play around and adjust things slowly until you find a sweet spot.

I am not going to comment where my mind has wondered to now :-!  lol.

Hi John,

It may help if you switch on the preheat function on the DreamStation main menu before you go to bed. It warms up the humidifier for 30 minutes and switches itself off to get things warmed up.

I tend to have the hose and humidifier on 5 (max) and for me, the humidifier just lessens the dry mouth syndrome and doesnt eliminate it completely. Like Sleep2snore said, try different settings to see what suits you best.

To be honest, I was getting used to having a dry mouth when using the machine before I got the humidifier so persevere with it.

Hi John,

I had the same problem until I disvovered that the setting for the heating was “adaptive” (works following a piece of software that switches the humidifier on/off during the night), as opposed to “fixed”. I changed it to fixed and I now get the benefits of the humidifier all night - and the hose is warm.

Good luck.

Reply to Discussion

RSS

Sleep Apnoea Forum

New to the Sleep Apnoea Forum? 

1. Stop by our Sleep Apnoea Welcome Center to introduce yourself to the SleepGuide community.
2. Start a New Topic of Conversation.
3. Post your photos - of yourself, your old CPAP machine, your new CPAP machine, your pet, something about you!

Interested in advertising, have a problem or need to contact us? Click the Report an Issue page.

 

Latest Activity

Alison replied to Bethany's discussion Help for the hubby
"Hi Bethany, Just a suggestion but has anyone mentioned narcolepsy?"
yesterday
Profile Iconsharon and Penny Harrison joined Hope2SleepGuide
Saturday
jjimjam is now a member of Hope2SleepGuide
Jun 14
Sleep2snore replied to Bethany's discussion Help for the hubby
"The two things that come to mind is diabetes and low blood pressure.  Though I think they would have checked for diabetes, a sudden drop in blood pressure is more difficult to catch.  Has he had his heart checked?  Also there is a…"
Jun 12
Bethany replied to Bethany's discussion Help for the hubby
"Thank you for the welcome.  It can get very frustrating, especially when we hear stories like yours with a very long fight before getting any actual diagnosis. We have feeling that we are also going to be on a very long road before we find…"
Jun 8
Bethany replied to Bethany's discussion Help for the hubby
"His CPAP machine is currently set at 7.5cmph, it was originally a little lower but after his check up they advised to increase it. He has follow ups with a sleep doctor every 3 months for the first year (unless we are having problems then we can go…"
Jun 8
Vivienne Roberts added 2 discussions to the group Buy-Sell-Swap
Jun 6
Vivienne Roberts joined The SleepGuide Crew's group
Jun 6
Sleep2snore replied to Mags's discussion What is a good oxygen Oximeter
"You should have got the manual with the Airsense 10 Autoset? If you didn't get it AIRSENSE RANGE MANUAL . pdf"
Jun 6
Sleep2snore replied to Chris Vesey's discussion What pressures?
"I hope they set the low pressure up and that it is not left 4 to 20. I find a lot of people is given machines set up like this and that is not really good. It is not recommended that you shift the pressures on an NHS machine, the clinic will not be…"
Jun 6
Sleep2snore replied to Bethany's discussion Help for the hubby
"Is it a CPAP machine with a fixed pressure he has? It might be that a fixed pressure machine is not the right one for him or he may have a complicated Sleep Apnoea, in other words there are other things going on other than just his throat…"
Jun 6
Kath Hope replied to Chris Vesey's discussion What pressures?
"Hi Chris I think you mean 'APAP' rather than 'acap' and if so, it will have automatic pressures.  It's not really recommended to alter your own pressures, and people only usually do that in desperation if they…"
Jun 6
Kath Hope replied to Bethany's discussion Help for the hubby
"Welcome to our forum Bethany, but so sorry to read of what you're both going through.  Glad your husband's severe sleep apnoea got picked up finally and at least you know he's on good treatment for that.  However, it's…"
Jun 6
Profile IconVivienne Roberts, Bethany and Andrew Woo joined Hope2SleepGuide
Jun 6
Bethany posted a discussion

Help for the hubby

Hello everyone, I am hoping that maybe someone out there has been through what my husband is currently having to deal with. Three years ago my husband randomly collapsed at his place of work (hes an engineer and works with machinery so naturally him…See More
Jun 5
Chris Vesey posted a discussion

What pressures?

Hi,I was given my resmed airsense 10 by the hospital and instructed in its use. At no time were pressures mentioned and i have read of people altering the pressures. As mine is an acap does this mean that the pressure is set automatically by the…See More
Jun 4
Mags updated their profile
Jun 4
Mags replied to Mags's discussion What is a good oxygen Oximeter
"Thanks Kath Will have a look in the morning and let you know"
Jun 4
Kath Hope replied to Mags's discussion What is a good oxygen Oximeter
"The Airsense Autoset does show the data in you look in the 'Sleep Report' section on your screen you can then scroll down to AHI and should also be able to see leakage.  If you can't see the AHI then it means the hospital have…"
Jun 4
Mags replied to Mags's discussion What is a good oxygen Oximeter
"The Machine is Res Med AirSense 10 AutoSet"
Jun 3

© 2018   Created by The SleepGuide Crew.   Powered by

Badges  |  Report an Issue  |  Terms of Service