Hope2SleepGuide

Sleep Apnoea Forum Bringing Help + Support to the Patient

I have been using above machine for years on autoset mode. as the pressures are getting quite high I decided to engage the EPR function. nowhere on the clinical menu or standard menu is there any mention of EPR. I turned the machine to CPAP Mode and there is option on standard menu and clinical menu to set and adjust the settings for EPR. I am totally baffled by this. the literature I have looked at says there should be and option to engage EPR during Autoset Mode. maybe the machine is faulty. any advice would be great. The hospital no longer support this machine and offered a non autoset S9 which has no access to compliance data etc so I prefer my autoset machine.

Regards

Ged

Views: 92

Reply to This

Replies to This Discussion

As you know Ged the S8 Spirit is an old machine, and I understand why you're loathe to give it up if your clinic supplies machines with no data.  I do recall from many years ago there was talk that the international version of the Auto Spirit didn't have EPR, even though the USA version did.  However, it seems strange that it's available on CPAP mode but not on APAP, and I can't remember if that was an issue.  If it's not in the clinical settings it might be the case.  You could try calling Resmed on 0800 917 7071 to see if they can help, although they'll probably try to talk you into upgrading lol.

It should be there, but may be locked out.

Manual S8 Series II

Thanks for your replies. I have looked at the manual and as advised there should be EPR on autoset. I have done a factory reset on the machine and still no EPR on autoset yet still there on CPAP. I am guessing that there is no EPR facility on this variant for autoset. I will just have to deal with it using autoset as a diagnostic for correct pressure from time to time and use CPAP as my regular setting. hopefully pressures will go back down if I can lose some weight.

It may be what I suspected, that it wasn't available on your international version, as I remember people complaining about it many years ago.  If it helps to know I never found EPR helpful when I was on CPAP (I'm on VPAP now).  Hope your old failthful machine keeps going for a long time to come and good luck with the weight loss.

I can't see why they would have it on CPAP and not on AUTO, I suspect it has been locked out by sleep clinic, resetting will not help.

It might be right that earlier models might not have EPR as I do remember seeing something about that, but why would it be on CPAP and not an APAP?

I would contact the manufacturer ResMed to confirm it either has or has not got it.

I found ResMed to be helpful enough in the past when I have contacted them, though they will not help when it comes to repairs etc, it s a case of it has to be repaired by them or their agents, which is only sleep lads and they send them to ResMed.

I would give them a phone or email them.

I just can't get my head round why they would have it on CPAP and not on APAP?

I never used to use EPR on my old machines, but with this new one I am forced to as if I don't the Nasal Pillows jump when I breath out and this wakes me up.  ResMed 0800 917 7071 or fill in the form at   ResMed Contact us.

There is a email address on this page if you want to contact them direct.

ResMed Mysleep - Customer/user contact.

Ah!  this is in quote mode, however as I am lazy it should still work, wait or I test it, YES it does.

Reply to Discussion

RSS

Sleep Apnoea Forum

New to the Sleep Apnoea Forum? 

1. Stop by our Sleep Apnoea Welcome Center to introduce yourself to the SleepGuide community.
2. Start a New Topic of Conversation.
3. Post your photos - of yourself, your old CPAP machine, your new CPAP machine, your pet, something about you!

Interested in advertising, have a problem or need to contact us? Click the Report an Issue page.

 

Latest Activity

Kevin Offland posted a discussion

For sale Philips dreamstation

Philips dreamstation only a few hours used comes with a Resmed mask all tubes power supply, instructions and bag it's in…See More
14 hours ago
Kevin Offland is now a member of Hope2SleepGuide
15 hours ago
Marc updated their profile
15 hours ago
Marc added a discussion to the group Buy-Sell-Swap
Thumbnail

Selling Resmed S9 & Remstar Pro M Series

I am selling my old machines.1x Resmed S9 with power supply1x Remstar Pro M Series with power supply only1x Remstar Pro M Series with case and some accessoriesI am having problems adding images here so I have put images of them here:…See More
15 hours ago
Marc joined The SleepGuide Crew's group
15 hours ago
Profile IconMatthew li and Stuart Wormleighton joined Hope2SleepGuide
Saturday
Marc is now a member of Hope2SleepGuide
Mar 20
Profile IconJune Curtin and Frank Fartin joined Hope2SleepGuide
Mar 18
Lee replied to Lee's discussion DreamWear full face
"Well I turned EPR on and tried the mask again last night, but again I stopped breathing which woke me up gasping for air. It seems to happen just after or not long after I drop off, after the third time I changed mask back to original one and went…"
Mar 18
Kath Hope replied to Lee's discussion DreamWear full face
"Sorry for the delay as I managed to get myself locked out of the forum lol.  Please don't be messing with the pressures and contact your hospital if your wife has noticed you looking gray.  Perhaps go back to a different mask until…"
Mar 15
Edam replied to Edam's discussion APAP or BIPAP
"There is no link between the 95% pressure and the AHI. A few nights back my 95% pressure was 19.46 with AHI 0 Last night my 95% pressure was 17 with AHI 0 When the AHI does increase its normally hypopnoea,s So why does the APAP want to increase the…"
Mar 15
Lee replied to Lee's discussion DreamWear full face
"Hi thanks for the reply’s I will look at this as the wife said I was gray yesterday and after looking at the instructions again it says about the symptoms I had to not use and talk to my clinic so a bit worried. I used my other full face mask…"
Mar 15
Sleep2snore replied to Lee's discussion DreamWear full face
"I would say if you have the Ramp Start enabled to make it start at a higher pressure.  Check also if you are using a big enough cushion as this is a common mistake.  Same with Nasal Pillows, people tend too use a size to small. Check you…"
Mar 14
Sleep2snore replied to Edam's discussion APAP or BIPAP
"That is not impossible, even dust and mites can cause problems, even the mites that are so tiny you can't see them and they live on your body.  However, only you yourself can work out if certain food make things worse.  It could be…"
Mar 14
Edam replied to Edam's discussion APAP or BIPAP
"I am now finding that the pressure the APAP runs at during the night is dependent  on what I have eaten that evening. I have found that if I have bolied rice rather than chips with the evening meal then my 95% pressure can reduce by as much as…"
Mar 14
Kath Hope replied to Lee's discussion DreamWear full face
"Hi Lee.  Sorry to hear you're still having problems with masks.  It's not normal to feel there's not enough air with the DreamWear as that mask usually give people the opposite sensation of feeling more pressure than…"
Mar 13
Lee posted a discussion

DreamWear full face

Hi all I’m having trouble with my DreamWear full face mask,I’ve spent a long time getting the fit right but I have two problems 1. The bit between my nostrils somehow hurts it’s bearable but I would sooner not have the pain and 2. I have to breathe…See More
Mar 13
Sleep2snore replied to SleepyHead's discussion NHS or Private to get diagnosis to determine treatment
"How are you getting on, any progress?"
Mar 5
Sleep2snore replied to Edam's discussion APAP or BIPAP
"I was not off for a few days. The results were the same as when I started! Which I have to say was bad!"
Mar 5
Felicity Goodliffe is now a member of Hope2SleepGuide
Mar 5

© 2019   Created by The SleepGuide Crew.   Powered by

Badges  |  Report an Issue  |  Terms of Service