Hope2SleepGuide

Sleep Apnoea Forum Bringing Help + Support to the Patient

I have had problems with my Resmed S9 APAP staying at 20 cm for 2-3 hours at a time which wrecks me the next day.

This problem has been ongoing for many months and when I think I have fixed it it comes back

Using Sleepyhead I can see that during this spell of high pressure it looks like I am double inhaling.

Is this possible??

Views: 418

Reply to This

Replies to This Discussion

This is the Sleepyhead graph

Attachments:

Why is it going up to 20 in the first place, most people do not need such a high pressure.

I think you need to get the machine checked.

You have a strange flow pattern, I have seen that before but for the life of me I can't get my memory to bring up that memory.

If it were me I would limit the max pressure to 16 and see what happens.  If the high pressure wrecks you for the next day then limiting it for one day will do no harm.  It is unlikely you will need more than 16 of pressure anyway.  If it max's out at 16 either you need the pressure or it has a fault.  S9s are getting on a bit now but have you got the settings right for the hose and mask type?

There appears to be a flow problem of some kind but my brain is not working!

The machine has been changed and I still have the strange flow pattern and it still goes up to 20.

I have posted the problem on a US forum as well. On there the last couple of posts either say reduce the pressure or leave it as it is as the machine is doing the job properly as its responding to flow limitations.

I,m getting the same mixed response from the hospital as well.

As for the flow pattern I have spent many hours searching the internet for a similar flow pattern but with no success

Tonight I have reduced the max to 16, disconnected the H5i, and changed the mask.

Probably doing to many changes at one time but I want a good kip!!! 

I think my high pressure problem is cause by "overlap syndrome" 

Just before going to bed last night I used a rarely used blue inhaler.

This kept my pressure below 15 and reduced the flow limitations although the strange flow pattern had not changed

Its only one night but ....

Experimentation is the name of the game at times.

If you find the answer let us know.

I think the machine is misinterpreting how you are responding.  After all it is just a machine and is only as good as the software in it.

I increased the dosage of my reliever inhaler, Fostair, yesterday morning and had another good night.

I will increase the dosage again tonight which will take me back to the dosage I have been on in the past.

I will be contacting my respiratory nurse tomorrow and try to explain why I need the higher dosage to make my CPAP work better !!!!

Just wondering if your airways are drying out causing asthma attack or whatever you are having.

It does not need a lot of dryness to make me wake up in a bit of a panic and struggling to breathe.

I have the humidifier 2/3rds up at least and on dry nights even more.

My mask ,F & P Simplus, gets too noisy when i increase the humidity too much.

I may try increased humidity with another mask if I still have problems .

Since I have  started to use the inhalers I have noticed, on Sleepyhead, that the Flow Limitations decrease when the pressure increases as it should

Before using the inhalers increased pressure had no effect on the Flow Limitations.

Also I am thinking that this problem with high pressure could be seasonal ??

A bit of hayfever making my COPD worse which the APAP mistakes for Apnea

It is a machine and if you have COPD and suffer from hay fever and asthma it will cause problems that you will have to find a work around for.  Looks like you have already found one that helps.

It is very much a case of experiment and see. 

You are right about needing the extra humidity.

Its been very dry lately , I measured it at 39%RH,  so I will start to us the "Warm Up" on the H5i to get the humidity up straight away

On my last visit to the hospital I was told that the high pressure was caused by my Sleep Apnea getting worse despite a

AHI of 0 !!!.

I will have to change hospital. Perhaps a Dreamstation will suit me better

Reply to Discussion

RSS

Sleep Apnoea Forum

New to the Sleep Apnoea Forum? 

1. Stop by our Sleep Apnoea Welcome Center to introduce yourself to the SleepGuide community.
2. Start a New Topic of Conversation.
3. Post your photos - of yourself, your old CPAP machine, your new CPAP machine, your pet, something about you!

Interested in advertising, have a problem or need to contact us? Click the Report an Issue page.

 

Latest Activity

Edam replied to Edam's discussion Double inhaling
"Its me not the machine. The S9 has been checked by Resmed and no fault was found but the circuit board was changed as a precaution. I have used another S9 but had the same problem. I have been told by the hospital that despite my AHI being under 1…"
19 hours ago
Sleep2snore replied to Edam's discussion Double inhaling
"Don't rule out a fault with the machine or restricted airflow. I would also not rule out that you might be one of the few that needs a different machine. In any case, it should not go to 20 and sit there, I would get it checked or replaced. If…"
20 hours ago
Edam replied to Edam's discussion Double inhaling
"Before I make a decision I am going to try something different. I have noticed that when it goes up to 20 most times it has done so when the pressure has dropped to minimum which is 12 at present. I will increase the minimum pressure to 14 so…"
Monday
Edam replied to Edam's discussion Double inhaling
"I think its time to make a decision. Either buy another make of APAP or get referred to another hospital which supplies a different make"
Monday
Sleep2snore replied to Edam's discussion Double inhaling
"That is hard to believe.  A pressure of 20 is quite high and very few require that amount of pressure. 1 ltr/min is nothing, the machine should cope with that without any problems at all. A lot of people get mixed up with pressure and…"
Sunday
Edam replied to Edam's discussion Double inhaling
"I thought I had this problem solved but it got stuck at 20 again last night. My 95% pressure was 19, AHI  0.1 and leak 1 l/min. Sleepyhead shows that it was stuck at 20 for approx 30 mins ."
Sunday
Debra Wells is now a member of Hope2SleepGuide
Friday
Sleep2snore replied to Ruth Furniss's discussion Cold air
"Don't know what machine ou have, but a heated hose can help a lot. You can get them as a stand alone but it is not ideal. If your machine has the facility for a heated hose it might be worth the investment. Heating the room will help."
Oct 30
Sleep2snore replied to Renee Rowlands's discussion Recommendation please for Oximeter purchase.
"There are plenty on the market, but one thing I would make sure it did was to store the data for printing or downloading. There are plenty that say they do this and don't, so be aware of buying off Amazon or Ebay."
Oct 28
Kath Hope replied to Ruth Furniss's discussion Cold air
"Like you say yourself Ruth, warming up the bedroom will help, but also if you don't have a heated humidifier then that would help - as will covering the tube with a Hose Cover."
Oct 28
Steve Bacall is now a member of Hope2SleepGuide
Oct 28
Ruth Furniss posted a discussion

Cold air

Hi I have sleep apnoea & Copd this is my first winter using cpap, found it very hard to sleep last night because of breathing in cold air was wondering if anyone had any suggestions on how to warm the air up besides sleeping in a warm room? I…See More
Oct 28
Mark Darbyshire is now a member of Hope2SleepGuide
Oct 20
Bill Thomson added a discussion to the group Buy-Sell-Swap
Thumbnail

ResMed DC-DC converter for S9

I have for sale a converter which allows the S9 machine, which requires a 24v supply, to run from a vehicle 12v or 24v DC socket, or direct from a 12v battery. The converter can power a humidifier and heated tube as well as the CPAP machine,…See More
Oct 13
Bill Thomson joined The SleepGuide Crew's group
Oct 13
Sleep2snore replied to Chris Vesey's discussion Cure for wind
"It would depend if there was a smell or not "
Oct 9
Sleep2snore replied to Edam's discussion Double inhaling
"I'll be interested to know what you have found.  Give it time so you can prove what is happening. I had my machine pulse at full pressure for the second time when it was switched on, turning it off then on again a couple of times with a…"
Oct 9
Mark bowerman is now a member of Hope2SleepGuide
Oct 9
Renee Rowlands posted a discussion

Recommendation please for Oximeter purchase.

Hello everyone!I would very much like to check my oxygen levels during the night.  Can anyone recommend an Oximeter to purchase please?My mask is a F&P Brevida which has soft straps and one of the straps slips up my head during the night, making…See More
Oct 7
Kyla Davies replied to Kyla Davies's discussion Soclean machine in the group Buy-Sell-Swap
"Thanks Kath, edited with price. "
Oct 5

© 2018   Created by The SleepGuide Crew.   Powered by

Badges  |  Report an Issue  |  Terms of Service