Hope2SleepGuide

Sleep Apnoea Forum Bringing Help + Support to the Patient

Hi

I was wondering if anyone has used this mask as I am thinking about asking for this mask when I am due a new mask in October as I have the Quarta Air which I not getting on it that well so currently  I'm using Fitlife and Perform full face mask. I am getting sores around the mouth area because of sweating and also dribbling from the left side of my mouth.  For some reason I only dribble from the left side of the mouth and I dont know why but I am slightly weaker on that side of the body.

1. How did you find the mask?

2. What was the fit like?

3. Was easy to keep clean?

4. How often did you need to replace the cushion?

5. How easy was it click together?

6. Did you find that it leaked a lot?

7. Would you recommend it to someone else as a good mask?

8. How easy is it to click the clips on to the mask? (Especially if you have problems with your hands)

9. Does the NHS supply these masks?

Dee

Views: 507

Reply to This

Replies to This Discussion

Hi I received my mask liner for my mask.  I have solved the leak around eyes but still getting higher leaks with the liner than when I was use the fitlife mask.  I was finding with the fitlife mask was leaving a deep mark on the left side of my face. I need to get a larger head gear for that mask as the one I have which might help with the marks.

Dee

HiDee
I have found with my Simplus mask that it needs to be fairly high on my face.
I wear it so that the bottom of the mask is about a centimeter above the bottom of my chin.
It makes a difference what pressure your machine is operating at. If it is high then it's harder to stop the leaks. Are you on automatic or fixed pressure? And how long is your ramp time?
John from Oz

DeeNJai said:

Hi I received my mask liner for my mask.  I have solved the leak around eyes but still getting higher leaks with the liner than when I was use the fitlife mask.  I was finding with the fitlife mask was leaving a deep mark on the left side of my face. I need to get a larger head gear for that mask as the one I have which might help with the marks.

Dee

I've had a Simplus since launch, it's by far the best I've had yet for a full face mask, less fiddly that the Quattro FX and very light. I don't use it a lot (only when I can't get comfortable with a nasal interface) as I use it when hay fever or congestion makes nasal breathing hard.

It's very easy to maintain and easy to click together and adjust even in the dark. F&P use a material for their masks that seems to last ages and responds well to cleaning.

I use the Simplus every day and its the best mask I have ever used . Its even better than my old favourite ZZZ mask and that's saying something.

I initially had problems with the headgear but the replacement is much better and rarely needs any adjustment. The cushion is pretty bomb proof and as symmit says cleans well. I cant see F&P having to sell many spare parts.

My only criticism, and that's minor, is that I always seem to twist the top headgear when I put it on .

Reply to Discussion

RSS

Sleep Apnoea Forum

New to the Sleep Apnoea Forum? 

1. Stop by our Sleep Apnoea Welcome Center to introduce yourself to the SleepGuide community.
2. Start a New Topic of Conversation.
3. Post your photos - of yourself, your old CPAP machine, your new CPAP machine, your pet, something about you!

Interested in advertising, have a problem or need to contact us? Click the Report an Issue page.

 

Latest Activity

Jonathan replied to Jonathan's discussion ResMed AirSense 10 getting noisy
"Just to tidy this up, I finally had an in-person review by my sleep clinic yesterday, who agreed the ResMed AirSense 10 was "wheezy" and replaced the machine."
Saturday
Collette rose replied to Collette rose's discussion 1st time and I’ve failed the mask leak test
"thank you jonathan,i did get the it pack so tried the small and still struggled but i was sat up in bed so will try lying down great suggestion "
Nov 3
Jonathan replied to Collette rose's discussion 1st time and I’ve failed the mask leak test
"Hi My first thought is "don't panic"!  We're all a bit different, and there are many things that can be tweaked.  I took to CPAP therapy like a duck to water, but I've had friends who say they can't cope, but…"
Nov 2
Collette rose posted a discussion

1st time and I’ve failed the mask leak test

Hi everyone, today I received my rental kit - prisma smart max, plus a Philips dreamwear mask which I’ve been wearing unconnected to try and get used to it. I just did a mask fit test using a medium mask and got a constant red/orange leak warning…See More
Nov 2
Collette rose is now a member of Hope2SleepGuide
Oct 31
John posted a discussion
Oct 30
Profile IconBill Wright, Nicole Watson, TJ Bennett and 2 more joined Hope2SleepGuide
Oct 29
John replied to John's discussion evil mask noise
"Ha well it lasted a couple of days but started howling again. But it's a step in the right direction, just needs a bit more work."
Oct 24
Jonathan replied to John's discussion Has anyone been told root cause of their OSA?
"Nope, I just accept that some people's throats tend to close when they sleep, due to a loss of muscle tone during deeper sleep.  Back when I was diagnosed, the sleep lab just filmed you whilst you slept, stuck an O2 meter on your finger,…"
Oct 24
Jonathan replied to John's discussion evil mask noise
"Good to know you found a solution!"
Oct 24
John replied to John's discussion Has anyone been told root cause of their OSA?
"Did anyone tell you exactly what the anatomical issue is, Jonathan?"
Oct 21
John replied to Jonathan's discussion ResMed AirSense 10 getting noisy
"Can't say I know about this."
Oct 20
John replied to John's discussion evil mask noise
"So I tore some fabric from one of the filters and glued it over the holes - and it worked!It was dead quiet, and the air was still flowing freely.It was quiet all night then after a few hours a bit of whistling until I gave it a wipe.Vast…"
Oct 19
John replied to John's discussion evil mask noise
"Hi Jonathan, well see my nose is blocked a lot, so I mouth breath which really sucks a lot more moisture and makes my mouth dry. So I put humidity on maximum, which makes for condensation at the mask end, which becomes a demonic reed instrument.Now…"
Oct 17
Jonathan posted a discussion

ResMed AirSense 10 getting noisy

HelloI have an NHS issued ResMed AirSense 10 with heated humidifier.  In the last couple of weeks, it's developed an annoying noise, when I inhale. It bothers me a little and my partner a lot! I sometimes get problems if the water container in the…See More
Oct 16
Jonathan replied to John's discussion evil mask noise
"Hi My first question is why is condensation forming?  I very occasionally get some condensation, may be once a month, but I can quickly run a finger around the inside of the mask, and wipe it away.  I use a nasal mask, with the humidifier…"
Oct 16
John replied to John's discussion What's a good Apnea forum?
"11K+? Ok that's probably where I should look then :-)"
Oct 16
Kath Hope replied to John's discussion What's a good Apnea forum?
"Hi John. Thanks for the compliment as I do my best popping on here, but it's difficult due to us now supporting 25k+ patients at the charity. To be honest, the forum is quiet because most people seem to prefer Facebook and forums aren't as…"
Oct 16
John posted discussions
Oct 16
Jonathan replied to John's discussion Has anyone been told root cause of their OSA?
"There's some information here, but generally it's very common and likely due to our anatomy."
Oct 12

© 2024   Created by The SleepGuide Crew.   Powered by

Badges  |  Report an Issue  |  Terms of Service