"Yes, it does the job. I use a Powapacs Atom for portable power "
Sleep Apnoea Forum Bringing Help + Support to the Patient
Air Sense 10 - changing pressure settings
I have been successfully using my air sense 10 since OSA diagnosis, and my AHI is now under 2. I had an appointment with my clinic this week and have been told there is no need for further appointments and just to contact them if I need supplies or there is any problem with the machine.
I have used both full face and nasal masks and established which pressure settings are required for each.
I would like the flexibility of switching between masks as required. For example, I usually use the full face mask (and this is good when I have a cold etc), but I used the nasal mask when I had recent mouth surgery.
I know from experience that if I phone the clinic to ask them to change the pressure it can take ages for them to respond.
When I asked if it was possible to have control of the pressure settings, they advised that this is done centrally. Though they also said some people have found out how to do it themselves!
Has anyone had experience of having control of the pressure settings?
I understand that central control is important when titrating the pressures in the early stages of treatment, but I know what suits me and would love to have the ability to change the setting.
Alternatively would an APAP machine solve the problem?
Any advice?
Views: 166
Replies to This Discussion
-
Permalink Reply by Frances Knight on
-
Thanks Jonathan - I had seen the YouTube video. My question is really about the experience of people who have control of their pressure settings, for example those people who have bought their machines directly and not obtained them through an NHS respiratory clinic. Presumably they set the pressures themselves?
-
-
Ramble alert! My history is that I spent part of each week at a different location, so bought a second machine identical to my fixed pressure NHS machine and set it up to match using the clinician menu. This was a very long time ago. The NHS discharged me as self-managing, and in time I bought a DeVilbiss APAP and set my own min and max pressures, and monitored the data just fine. For example I increased the minimum pressure from 4 to 6 (max was 13) as on 4 I didn't feel I was getting enough air if I had a cold. Recently following unrelated surgery, they wanted me back under the sleep clinic, who issued me with a ResMed APAP which they control remotely. At one point I tried changing the ramp up setting, but decided to put it back to the original setting. The machine checks in with ResMed daily. I don't know whether it reports any changes I have made, or conversely whether it overrides any settings I have changed. In the early days of the new machine I had regular contact with the clinic to check the settings were working for me. (In truth, the DeVilbiss ran at a much lower pressure and ramped up occasionally, whereas the ResMed with the same parameters runs at a much higher baseline.) I am comfortable using some software called Oscar which lets me download data from both machines and gives much more detail than ResMed's MyAir. (I power off the machine, take out the SD card, operate the write-protect switch on the card, and read the data using Oscar on my laptop. I then un-write-protect the card, put it back in the machine, and power it up, and the machine is happy.) So in summary, my situation is different as the masks I switch between (Sleepweaver and DreamWear) are similar, and my NHS machine is an APAP. I wonder why you need a different air pressure with different masks, if they use the same hose diameter? One to discuss with your sleep clinic if you can get hold of them. May be suggest an APAP would be better if you require a pressure change when you switch masks. But at the end of the day, if it were me, I would take responsibility for my own health and make the changes I require. After all, that's what the sleep clinic did when they originally discharged me. Good luck!
-
-
A very helpful reply Jonathan. I found the pressure setting for the full face mask to be too high when I changed to a nasal mask, but perhaps I should have persisted?
I'll try again and I'll also discuss with the clinic whether an APAP would be better.
Many Thanks!
Jonathan said:Ramble alert! My history is that I spent part of each week at a different location, so bought a second machine identical to my fixed pressure NHS machine and set it up to match using the clinician menu. This was a very long time ago. The NHS discharged me as self-managing, and in time I bought a DeVilbiss APAP and set my own min and max pressures, and monitored the data just fine. For example I increased the minimum pressure from 4 to 6 (max was 13) as on 4 I didn't feel I was getting enough air if I had a cold. Recently following unrelated surgery, they wanted me back under the sleep clinic, who issued me with a ResMed APAP which they control remotely. At one point I tried changing the ramp up setting, but decided to put it back to the original setting. The machine checks in with ResMed daily. I don't know whether it reports any changes I have made, or conversely whether it overrides any settings I have changed. In the early days of the new machine I had regular contact with the clinic to check the settings were working for me. (In truth, the DeVilbiss ran at a much lower pressure and ramped up occasionally, whereas the ResMed with the same parameters runs at a much higher baseline.) I am comfortable using some software called Oscar which lets me download data from both machines and gives much more detail than ResMed's MyAir. (I power off the machine, take out the SD card, operate the write-protect switch on the card, and read the data using Oscar on my laptop. I then un-write-protect the card, put it back in the machine, and power it up, and the machine is happy.) So in summary, my situation is different as the masks I switch between (Sleepweaver and DreamWear) are similar, and my NHS machine is an APAP. I wonder why you need a different air pressure with different masks, if they use the same hose diameter? One to discuss with your sleep clinic if you can get hold of them. May be suggest an APAP would be better if you require a pressure change when you switch masks. But at the end of the day, if it were me, I would take responsibility for my own health and make the changes I require. After all, that's what the sleep clinic did when they originally discharged me. Good luck!
About
Sleep Apnoea Forum
New to the Sleep Apnoea Forum?
1. Stop by our Sleep Apnoea Welcome Center to introduce yourself to the SleepGuide community.
2. Start a New Topic of Conversation.
3. Post your photos - of yourself, your old CPAP machine, your new CPAP machine, your pet, something about you!
Interested in advertising, have a problem or need to contact us? Click the Report an Issue page.
Latest Activity
"Hi Nick thanks. Does it do the job and could you camp with it?"
CPAP Total Face Mask
I was curious whether anyone has used the CPAP Total Face Masks and could pass on their observations? I've been using an Airfit F20 for years which is fine apart from the permanent red mark on the bridge of my nose, and have recently tried the…See More
"I've been using the Resmed Airmini for about 5 years when travelling - overall lightweight and small and can be controlled by an App, but it does produce a loud whistling/wind sound for me which hasn't been reduced by an inline filter or…"
"Hi
It sounds like you need to have more conversations with your sleep clinic. There's little point in having a high pressure if it means you cannot tolerate the machine. There's an interesting video here…"
Pressure waking me up. Belching and wind
HiI'm using the prisma smart max machine. Initially I was just on a nasal mask, this changed as I was sleeping with my mouth open. I then went to face and nose mask and complained of bad wind and belching. Sometimes the pressure in the night was…See More
"Just to tidy this up, I finally had an in-person review by my sleep clinic yesterday, who agreed the ResMed AirSense 10 was "wheezy" and replaced the machine."
"thank you jonathan,i did get the it pack so tried the small and still struggled but i was sat up in bed so will try lying down great suggestion "
"Hi
My first thought is "don't panic"! We're all a bit different, and there are many things that can be tweaked. I took to CPAP therapy like a duck to water, but I've had friends who say they can't cope, but…"
1st time and I’ve failed the mask leak test
Hi everyone, today I received my rental kit - prisma smart max, plus a Philips dreamwear mask which I’ve been wearing unconnected to try and get used to it. I just did a mask fit test using a medium mask and got a constant red/orange leak warning…See More
Are every small CPAP machines any good?
Travel sized, micro - any good?See More
"Ha well it lasted a couple of days but started howling again. But it's a step in the right direction, just needs a bit more work."
"Nope, I just accept that some people's throats tend to close when they sleep, due to a loss of muscle tone during deeper sleep. Back when I was diagnosed, the sleep lab just filmed you whilst you slept, stuck an O2 meter on your finger,…"
"Did anyone tell you exactly what the anatomical issue is, Jonathan?"
"Can't say I know about this."
© 2025 Created by The SleepGuide Crew.
Powered by
