Hope2SleepGuide

Sleep Apnoea Forum Bringing Help + Support to the Patient

Hello everyone,

I've not been on here for a while. I lost my mother just before Christmas to cancer. I'd been helping her through the treatment and since she passed I've been dealing with her estate, so my apologies for my absence.

Because of everything that has been going on, I hadn't looked at the data from my cpap machine in a while, so last week I re-installed the "Sleepyhead" program on my pc and put in the card. It showed that I have been getting lots of leaks! Odd thing was, the leaks started on the night of June 25th and every night since. Nothing before that date. That night I was more careful than usual about putting on my mask, and even asked my girlfriend to check the straps etc. But when I checked the data in the morning, the leaks were still there. That night I decided to put on the new hose that I was given at my annual checkup, but again no change. I contacted the hospital who supplied the equipment and went to see them today. They could see the leaks from the data, and asked if I felt anything from the mask. (I use a full face mask, the Mirage Quattro from Resmed.) I told them no, I hadn't. They said that as my AHI readings were low, less that 2 most days, that the machine was doing it's job and I was responding to treatment, and not to worry about the leaks unless things changed. I wasn't completely happy with what I was told. I thought that if there was a leak, then there's a fault that needs fixing, surely? To top it all, they forgot to put the memory card back into my machine, which I didn't notice til I was home!

Up til the leaks started, my AHI was less the 0.5. After June 25 it went up to between 1.3 - 1.9. OK that's not a big rise, but noticeable.

Plus I have no idea what changed on the night of June 25th?

I would welcome any thoughts or suggestions.

Thank you very much.

Views: 151

Reply to This

Replies to This Discussion

Hi David and so sorry to hear about the loss of your mother, and caring for someone with terminal cancer is very sad.  My first thought was the hose, as sometimes very tiny holes can appear, but you've explained it wasn't that.  Another thing that can cause leaks to appear and continue is when the mask or mask cushion is ready for replacing.  Also, I'm not sure how you wash it, but if you're using anything like Fairy Liquid or anything with added moisturisers, what happens is that the additives in the detergent can leave behind a residue on the soft part of the mask (cushion), and whilst it looks clean, it can cause leaks.  I've just commented on another discussion here too that the new Silent Night Mask Liners are proving very successful in curing leaks http://www.hope2sleep.co.uk/products/134 so that might be worth a try.

As you said, the AHI is still very good, but I can understand you wanting to get to the bottom of the mask leaks, which can also cause us interrupted sleep.

Hope this helps and my best wishes to you as you come to terms with life without your Mum.

Reply to Discussion

RSS

Sleep Apnoea Forum

New to the Sleep Apnoea Forum? 

1. Stop by our Sleep Apnoea Welcome Center to introduce yourself to the SleepGuide community.
2. Start a New Topic of Conversation.
3. Post your photos - of yourself, your old CPAP machine, your new CPAP machine, your pet, something about you!

Interested in advertising, have a problem or need to contact us? Click the Report an Issue page.

 

Latest Activity

Jonathan replied to Jonathan's discussion ResMed AirSense 10 getting noisy
"Just to tidy this up, I finally had an in-person review by my sleep clinic yesterday, who agreed the ResMed AirSense 10 was "wheezy" and replaced the machine."
Nov 9
Collette rose replied to Collette rose's discussion 1st time and I’ve failed the mask leak test
"thank you jonathan,i did get the it pack so tried the small and still struggled but i was sat up in bed so will try lying down great suggestion "
Nov 3
Jonathan replied to Collette rose's discussion 1st time and I’ve failed the mask leak test
"Hi My first thought is "don't panic"!  We're all a bit different, and there are many things that can be tweaked.  I took to CPAP therapy like a duck to water, but I've had friends who say they can't cope, but…"
Nov 2
Collette rose posted a discussion

1st time and I’ve failed the mask leak test

Hi everyone, today I received my rental kit - prisma smart max, plus a Philips dreamwear mask which I’ve been wearing unconnected to try and get used to it. I just did a mask fit test using a medium mask and got a constant red/orange leak warning…See More
Nov 2
Collette rose is now a member of Hope2SleepGuide
Oct 31
John posted a discussion
Oct 30
Profile IconBill Wright, Nicole Watson, TJ Bennett and 2 more joined Hope2SleepGuide
Oct 29
John replied to John's discussion evil mask noise
"Ha well it lasted a couple of days but started howling again. But it's a step in the right direction, just needs a bit more work."
Oct 24
Jonathan replied to John's discussion Has anyone been told root cause of their OSA?
"Nope, I just accept that some people's throats tend to close when they sleep, due to a loss of muscle tone during deeper sleep.  Back when I was diagnosed, the sleep lab just filmed you whilst you slept, stuck an O2 meter on your finger,…"
Oct 24
Jonathan replied to John's discussion evil mask noise
"Good to know you found a solution!"
Oct 24
John replied to John's discussion Has anyone been told root cause of their OSA?
"Did anyone tell you exactly what the anatomical issue is, Jonathan?"
Oct 21
John replied to Jonathan's discussion ResMed AirSense 10 getting noisy
"Can't say I know about this."
Oct 20
John replied to John's discussion evil mask noise
"So I tore some fabric from one of the filters and glued it over the holes - and it worked!It was dead quiet, and the air was still flowing freely.It was quiet all night then after a few hours a bit of whistling until I gave it a wipe.Vast…"
Oct 19
John replied to John's discussion evil mask noise
"Hi Jonathan, well see my nose is blocked a lot, so I mouth breath which really sucks a lot more moisture and makes my mouth dry. So I put humidity on maximum, which makes for condensation at the mask end, which becomes a demonic reed instrument.Now…"
Oct 17
Jonathan posted a discussion

ResMed AirSense 10 getting noisy

HelloI have an NHS issued ResMed AirSense 10 with heated humidifier.  In the last couple of weeks, it's developed an annoying noise, when I inhale. It bothers me a little and my partner a lot! I sometimes get problems if the water container in the…See More
Oct 16
Jonathan replied to John's discussion evil mask noise
"Hi My first question is why is condensation forming?  I very occasionally get some condensation, may be once a month, but I can quickly run a finger around the inside of the mask, and wipe it away.  I use a nasal mask, with the humidifier…"
Oct 16
John replied to John's discussion What's a good Apnea forum?
"11K+? Ok that's probably where I should look then :-)"
Oct 16
Kath Hope replied to John's discussion What's a good Apnea forum?
"Hi John. Thanks for the compliment as I do my best popping on here, but it's difficult due to us now supporting 25k+ patients at the charity. To be honest, the forum is quiet because most people seem to prefer Facebook and forums aren't as…"
Oct 16
John posted discussions
Oct 16
Jonathan replied to John's discussion Has anyone been told root cause of their OSA?
"There's some information here, but generally it's very common and likely due to our anatomy."
Oct 12

© 2024   Created by The SleepGuide Crew.   Powered by

Badges  |  Report an Issue  |  Terms of Service