Hope2SleepGuide

Sleep Apnoea Forum Bringing Help + Support to the Patient

 

 

Risky one this is - I must declare straight away that I am not a medical professional and offer this information purely to pass on things I have found useful - try any of this at your own risk.

 

Mask mod - I found that reducing the airflow by blocking part of the air bleed ports made me much less prone to drying out and made my humidifier last longer - with my Escape S8 I was emptying the humidifier in 4 hours or so, but I regularly go beyond this and was being woken by a dry tank. It also helped with cold nose syndrome !! I think the mask as standard lets far too much air out and I'm still here after all these years....

 

Pipework - although my Mirage Quattro full face mask comes with a pivot connector for the pipe, I was not given one for the blower end - get one, it makes kinking much less of a problem especially when turning over.

 

Blower - mine is stood on part of a paving stone, I found this made it much quieter since it didn't then pass vibration to the cabinet it stands on. Put some rubber feet under the stone (I got mine from a garden centre) or a folded towel.

 

And thanks to the forum for being here - I've found the medical help and advice to be variable to say the least and am much happier when I can learn enough to be confident in the treatment and advice I'm getting.

Views: 175

Reply to This

Replies to This Discussion

The thought of blocking part of the vent port frightens me! Not many people other than scuba divers will recognise CO2 'poisoning' symptoms and thus might get an extremely long, permanent even, sleep.

 

Even partially blocking the vent will cause you to start re-breathing the CO2 of your last exhale and blood CO2 levels will rise - fatally if you block too much of the vent.

 

I'll readily agrre that the makers build in a safety factor to ensure full venting of the mask with every breath and a bit besides. This causes the jet stream into your partners neck, of course. So the trick would have to be - not to block off more than the safety factor area. Clearly, 'after all these years', Caveman knows what area can be blocked.

 

A perfectly safe method of diffusing the jet stream is to stick a strip of ScotchBrite pan scourer loosely over the mask vent. This is not likely to do anything toward Caveman's other benefits, mind.

 

I fell out with Apex CPAP makers over their humidifier. They argued mine was working just fine according to design parameters and I argured it wasn't working at all because the water level didn't drop. That's for back-ground info about me and humidifiers.

 

I don't know the Escape S8 humidifer but it seems unreasonable that it empties in four hours unless you reduce the airflow over the water surface, as Caveman has. Water evaporation slows with the increase in ambient humidity so we can know that Caveman's exhaled air and CO2 are backing up to the humidifier chamber and that with correct, full air flow, the humidifier dries in four hours. The problem therefore has to be the rate of heating of the water in Caveman's humidifier. Either the control is turned up too high (even at max, four hours is very short) and/or the controlling thermocouple (thermostat) is defective, even shorted permanently closed.

 

A heated hose would take care of the cold nose problem.

 

I advocate threating the cause, not the symptoms. Service the humidifier and leave the mask vent unblocked at all.

 

As I said these mods work for me, I'm not advocating them - they are things people may try at their own risk. A couple of things I would add, firstly regarding CO2 poisoning - even when active you use less than 16 percent of the oxygen you breath in, so unless you go overboard with blocking it's unlikely. I've blocked half of the grid of small holes that form the vent on my Quattro mask.

 

Humidifier - I regard it as poor, my old seperate humidifier had a higher water capacity and worked better. I have this one turned up to maximum and still have problems with dryness but never rainout (as I sometimes did with my old one) so I think it's just a poor system, not faulty. The capacity of the S8 humidifier is maybe half a litre at the most - compare this with my room humidifier that uses around 3 litres of water in 10 hours and in winter (when humidity is low) only raises the humidity to 'comfortable' levels as measured by a room humidistat and it's hard to believe that the small unit really makes much difference.

 

Heated hose - not tried it but to wam the air adequately during the short time the air is in the hose with the usual hairdryer-like airflow would take power - and I think my electricity bills are high enough, in the UK around 12p per kilowatt-hour is average, so even 100 watts  soon adds up at 7 hours a night. That's another advantage of reducing the airflow - it's easier for the blower to maintain pressure so uses less power.

 

I'm sorry if you felt attacked by me, Caveman - not my intention at all.

 

Blocking the mask vent is potentially a very dangerous act and I feel compelled to point that out to people, even though you clearly stated 'at their own risk'>

 

There is a huge difference between raising room ambient humidity and humidifying the air you breath via a CPAP/APAP.

 

My Respironics humidifier has a small capacity - I guess in the region of 250cl - and it lasts all night at max setting. Over eight hours it will probably dry out.

 

The heated hose is supplied by a 1A 12V DC transformer - so it draws a lot less than 1A. I don't think you'd notice that in your utility bill! You can take my word - and those of thousands of other users - that it warms the CPAP air very comfortably (if you like warm air) and prevents rain-out. I'm reminded of days in the tropics when I breathe the air through it - every night during rain-out season..

 

TF

Thanks for sharing your experience Caveman, and for pointing out that whilst  blocking part of the bleed port works for you, you're not suggesting others do it unless they choose, as it could cause problems for some.

I love the tip of getting a pivot connecter for the blower end :)

Your humidifier seems to be a problem.  Are you sure it's not faulty, as they should last longer than that?

Glad you appreciate the forum, and look forward to more posts and interaction from you!



Tigers Fan said:

A heated hose would take care of the cold nose problem.

 

Good tip thanks TF.  I've had numerous people ask how to cure the 'cold nose syndrome' and one person I know has even tried cling film and baco foil on their nose - am not saying who ;)



Saying that the humidifier should not dry out so quickly implies that it is running too hot? - however I find the humidification to be insufficient even at maximum settings so even if it is faulty, getting it fixed would make it worse!

 

I've put forward these changes knowing that it would be controversial - you could argue that the manufacturers have spent much time and money establishing the correct operating parameters. If you are happy to accept that, then fine- but I'm 52 now and long ago decided that I'd rather research important matters for myself than blindly accept what I am told since the quality of 'experts' varies by a large degree, especially among the medical fraternity.

 

I've been diagnosed with sleep apnoea for 15 years and consider myself to have had enough real world experience to try my own solutions to the problems I have encountered and I'm still a functioning, breathing, opinionated old git.

 

I'm going to throw another couple of things into the hat - I clean my gear in the dishwasher and I remove scale in the humidifier tank with bathroom limescale remover. Nasty, horrible chemicals so rinse carefully.

 

You can be as controversial as you like on here.  As long as everyone is polite to one another there's no problem.  However, I won't be following suit with the limescale remover LOL.  I won't be putting the mask in the dishwasher either, as I've got a good routine going with the CPAP cleaners and get a good long use out of the masks this way without leaks!

Reply to Discussion

RSS

About

Sleep Apnoea Forum

New to the Sleep Apnoea Forum? 

1. Stop by our Sleep Apnoea Welcome Center to introduce yourself to the SleepGuide community.
2. Start a New Topic of Conversation.
3. Post your photos - of yourself, your old CPAP machine, your new CPAP machine, your pet, something about you!

Interested in advertising, have a problem or need to contact us? Click the Report an Issue page.

 

Latest Activity

Jonathan replied to John's discussion Wellu O2 Ring - is it accurate enough for the medics?
"Hi The SleepCube was a private purchase, as way back then my local sleep clinic assessed patients by filming them overnight, whilst wearing an oximeter, and only issued CPAP machines without humidifiers.  There was no remote monitoring and…"
23 hours ago
John replied to John's discussion Wellu O2 Ring - is it accurate enough for the medics?
"Yeah I was wondering about email address. I thought probably if they wanted me to mail them they would have given out an address. I can imagine heart data is considered more acute than sleep data, so it would make more sense to have that…"
yesterday
Jonathan replied to John's discussion Wellu O2 Ring - is it accurate enough for the medics?
"Hi. I didn't use PatientsKnowBest (ironic name), but I have an email address for my heart department for sending in ECGs.  I was just saying that they may be able to review a PDF when then cannot review a data file from your O2 ring. I am…"
yesterday
John replied to John's discussion Wellu O2 Ring - is it accurate enough for the medics?
"Hi Jonathan, did you do that through PatientKnowsBest?"
yesterday
Jonathan replied to John's discussion Wellu O2 Ring - is it accurate enough for the medics?
"On an unrelated topic, I've been able to send ECGs by PDF to my heart clinic. On the subject of Resmed and apnoeas, take a look at https://youtu.be/ufOOAfyzZso?si=Tpdl4EEiCQBZR4iD&t=276 Your machine may be under-reporting. Good…"
yesterday
John posted a discussion

Wellu O2 Ring - is it accurate enough for the medics?

Moving some furniture my long lost O2 ring continuous oxygen saturation monitor turned up. So I've been wearing it and it tells me I have loads of saturation drops during the night even though my Airsense 10 says I have very few apneas.So I get two…See More
Tuesday
Richard Smith replied to Richard Smith's discussion air bubbles after weight loss
"Hi, Just thought I'd give an update.  So, I had my appointment with the NHS sleep clinic which was much quicker than I anticipated and I've now had the overnight sleep study.  My AHI is now 6, down from over 30, so I'm…"
Oct 15
John replied to Sally Gray's discussion Microplastics risks
"Hi Sally from what I read the airsense doesn't suffer the same foam degredation issues as the infamous Phillips machine.I can conceive it's possible that microplastics may be shed from the flexible main tube.What worries me more about the…"
Oct 7
Jonathan replied to Richard Smith's discussion air bubbles after weight loss
"Hi My sleep clinic discharged me, saying they were happy I was self-managing.  Roll on a decade and the cardiologists taking care of me were very unimpressed and I was re-enrolled.  I expect remote monitoring with current generation Resmed…"
Sep 1
Richard Smith replied to Richard Smith's discussion air bubbles after weight loss
"Hi Jonathan, Thanks again for the info.  My cpap *should* be monitored by the NHS though I haven’t had any contact from them since pre-covid.  I checked out the link you gave to access extra data and I think that’s going to be…"
Aug 31
Jonathan replied to Richard Smith's discussion air bubbles after weight loss
"Hi I have the ResMed Airsense 10 Autoset (APAP).  It's monitored remotely by my NHS sleep clinic and I believe they can make changes to the settings.  I don't know whether they are notified if I make changes, nor whether they…"
Aug 31
Richard Smith replied to Richard Smith's discussion air bubbles after weight loss
"Hi Jonathan, Thanks for the reply.  I'd say that I'm fairly technical.  I have the ResMed Airsense 10 Elite machine.  I've discovered that I can upload data wirelessly from my machine and having lowered the pressure by…"
Aug 30
Jonathan replied to Richard Smith's discussion air bubbles after weight loss
"Hi You don't say how technical you are, or what sort of machine you use.  However https://www.sleephq.com/ has software which allows you to upload data from compatible machines, and analyse your sleep "score", including a…"
Aug 29
Richard Smith posted a discussion

air bubbles after weight loss

Hi,I've been on Mounjaro for about 3 months now, not primarily for weight loss, but I have lost weight around my face and neck.  I've noticed that I am increasingly getting air bubbles in my mouth which of course is disturbing my sleep (and my…See More
Aug 28
Sally Gray posted a discussion

Micro plastics risks

I was reading an article in the I newspaper today written by a journalist who had her blood tested for micro plastics and was shocked by the results.…See More
Aug 3
Alison Mitchell is now a member of Hope2SleepGuide
Jul 2
John posted a discussion

job with the charity

Was wondering if there might be a job for me with Hope2Sleep?(I also just asked this of a group by mistake)See More
Jun 27
Tracey Tilley updated their profile
May 22
Sharon Sullivan posted a discussion

For Sale - Ventura Full Total Face CPAP Mask

I’m selling an Ventura Full Total Face CPAP Mask Large and two spare liners.  I bought it new from the Hope2Sleep shop, but it is not suitable for me.  Only used for about two weeks so I have washed it thoroughly.   Because of this, it is very much…See More
May 17
Tracey Tilley replied to Jim Scullion's discussion UK Attendance Allowance
"I put in a claim for PIP which was denied and now I am over 66 and on pension I tried for AA. Denied again.I have other health conditions ( Diverticular disease and Bile Acid Malabsorbtion ) which I consider hard to live with and they refused all of…"
May 14

© 2025   Created by The SleepGuide Crew.   Powered by

Badges  |  Report an Issue  |  Terms of Service