"Yes, it does the job. I use a Powapacs Atom for portable power "
Sleep Apnoea Forum Bringing Help + Support to the Patient
new resmed s9 machine
hi everyone
I have been using my new machine for nearly a week now, but I have noticed that if I have to put the machine into standby whilst I go to the toilet in the middle of the night when I switch it on again it goes into what I can only describe as a pulsed humming sound which is loud enough to keep me from going back off to sleep, then seems to diminish when it has got back up to my pressure.
is this normal or do I need to contact the clinic at the hospital for them to check the machine, when I put it on for the first time when I go to bed it's quiet. any help would be appreciated. also does anyone know if the hospital will supply me with a chin strap to keep my mouth shut when asleep.
many thanks Bob O'Brien.
Views: 150
Replies to This Discussion
-
Permalink Reply by Kath Hope on
-
When you say standby Bob, do you mean you switch it off with the power button? I use a VPAP (which is in the same series as the S9) but haven't noticed this. Try taking the plug out of the wall and out of the back of the machine which should clear anything if it's a temporary issue.
-
Permalink Reply by ROBERT O'BRIEN on
-
hi Kath
I switch it off at the power button which means it is in stand bye mode, then when I press the button again it starts up the pump. even my wife can hear the pulsed humming sound which seems to disappear after it has got back up to my prescription of 12. it does not do it when I first go to bed even though it has been in stand bye all day. as understand it when the machine is plugged in to the wall socket and switched on it is either working or in stand bye but it is always powered up if that make's sense. i did not notice any noise when i had the loan machine on the first night of use. i am now using a nose mask which I find preferable but I sometimes open my mouth while asleep so I think I need a chin strap
-
-
Ah yes I thought that's what you meant. It definitely doesn't happen to me. Try unplugging everything and if that doesn't clear it then definitely let the hospital know.
It sounds like you mouth breathe during the night so a chin strap may help. They don't work well for everyone though (me included) so maybe it would be worth considering a full face mask and there are smaller versions of these out now which are quite minimalistic. I have 3 favourite masks.....the huge FitLife, but the other 2 are minimalistic ones....the Hybrid and the Amara View so worth asking your hospital if they stock either of those to try.
-
-
thanks kath i will try that tonight if that doesen't work i will go to the open clinic on tuesday.
thanks Bob.
-
-
Good luck Bob and it's great to hear you have a walk-in open clinic too as they don't all have those.
ROBERT O'BRIEN said:thanks kath i will try that tonight if that doesen't work i will go to the open clinic on tuesday.
thanks Bob.
-
Permalink Reply by Sleep2snore on
-
Sounds like the motor is being pulsed up slowly to speed again.
If you have a Ramp turned on try turning it off just to see what happens.
It might not be noticeably when the machine is cold, but after being hot the motor might be slightly more noisy when stepping up to speed.
The hospital will normally supply a chin strap.
-
-
hi there I assume when you say ramping up I would know it as the pressure building up , the hospital have set the machine for me so I have not messed with it starting at 4 increasing to 12. I mean if this is quite normal I guess I will have to get used to it over time, it's more of a nuisance than a problem. trying to keep the mask on all night is the problem seven hours is all I can manage at the moment, but it's still only a week so maybe I am being a bit hard on myself. however thanks for the reply it all helps.
bob
-
-
You're doing great in these early days Bob. I've never heard of a difference in noise when re-starting the machines with ramps, and I'm sure if it was common we'd have heard this before - especially in the Facebook Group with over 5,000 members. Mention it to your clinic on Tuesday, and also tell them about the mouth breathing so they can consider a different mask or a chin strap.
-
-
4 is a bit low, machines are usually set a bit higher than this, the nearer it is to the pressure you require the better treatment usually is, I say usually as there can be other things creep in, but I would have thought it should be at 8 at least, though when it starts it will start at 4 and quickly move up to its low setting.
I have moved my low pressure up and I find it is a lot better with the low pressure nearer the normal working pressure.
However, I think there might be a fault with your machine as when I get up and restart my machine it just starts the same as when it did first thing at night. If it is annoying ask the clinic to look at it, they will usually change it and swap over your data card.
About
Sleep Apnoea Forum
New to the Sleep Apnoea Forum?
1. Stop by our Sleep Apnoea Welcome Center to introduce yourself to the SleepGuide community.
2. Start a New Topic of Conversation.
3. Post your photos - of yourself, your old CPAP machine, your new CPAP machine, your pet, something about you!
Interested in advertising, have a problem or need to contact us? Click the Report an Issue page.
Latest Activity
"Hi Nick thanks. Does it do the job and could you camp with it?"
CPAP Total Face Mask
I was curious whether anyone has used the CPAP Total Face Masks and could pass on their observations? I've been using an Airfit F20 for years which is fine apart from the permanent red mark on the bridge of my nose, and have recently tried the…See More
"I've been using the Resmed Airmini for about 5 years when travelling - overall lightweight and small and can be controlled by an App, but it does produce a loud whistling/wind sound for me which hasn't been reduced by an inline filter or…"
"Hi
It sounds like you need to have more conversations with your sleep clinic. There's little point in having a high pressure if it means you cannot tolerate the machine. There's an interesting video here…"
Pressure waking me up. Belching and wind
HiI'm using the prisma smart max machine. Initially I was just on a nasal mask, this changed as I was sleeping with my mouth open. I then went to face and nose mask and complained of bad wind and belching. Sometimes the pressure in the night was…See More
"Just to tidy this up, I finally had an in-person review by my sleep clinic yesterday, who agreed the ResMed AirSense 10 was "wheezy" and replaced the machine."
"thank you jonathan,i did get the it pack so tried the small and still struggled but i was sat up in bed so will try lying down great suggestion "
"Hi
My first thought is "don't panic"! We're all a bit different, and there are many things that can be tweaked. I took to CPAP therapy like a duck to water, but I've had friends who say they can't cope, but…"
1st time and I’ve failed the mask leak test
Hi everyone, today I received my rental kit - prisma smart max, plus a Philips dreamwear mask which I’ve been wearing unconnected to try and get used to it. I just did a mask fit test using a medium mask and got a constant red/orange leak warning…See More
Are every small CPAP machines any good?
Travel sized, micro - any good?See More
"Ha well it lasted a couple of days but started howling again. But it's a step in the right direction, just needs a bit more work."
"Nope, I just accept that some people's throats tend to close when they sleep, due to a loss of muscle tone during deeper sleep. Back when I was diagnosed, the sleep lab just filmed you whilst you slept, stuck an O2 meter on your finger,…"
"Did anyone tell you exactly what the anatomical issue is, Jonathan?"
"Can't say I know about this."
"So I tore some fabric from one of the filters and glued it over the holes - and it worked!It was dead quiet, and the air was still flowing freely.It was quiet all night then after a few hours a bit of whistling until I gave it a wipe.Vast…"
© 2024 Created by The SleepGuide Crew.
Powered by
