Hope2SleepGuide

Sleep Apnoea Forum Bringing Help + Support to the Patient

I have a RemStarAuto M Series CPAP machine with a dehumidifier. The dehumidifier has stopped working. I have dome some testing and the humidifier works when hooked up to another Remstar so the fault is somewhere in the main device. I have tested the connections on the main circuit board and they function but that is the limit of my skills.

Has anyone come across a repairer for RemStar devices? (I have tried some of the advertised retailers and they haven't been able to suggest anything.)

Suggestions please.

Neil

Views: 115

Reply to This

Replies to This Discussion

I've not heard of any repairers here in the UK.  If it's the System One Remstar and it's under 2 years old it has a 2-year manufacturer's warranty.  If you got it from your hospital they will change it for you.

I think it is a Humidifier not a Dehumidifier but that is an easy mistake to make.

The humidifier is controlled from inside the machine and as far as I know, the only repairer is ResMed UK.

Someone tell me otherwise!

The other option and maybe cheaper one is to buy a stand alone humidifier.  Though you could contact ResMed for a quote.0800 917 7071 or fill in the form online.  https://www.resmed.com/uk/en/consumer/contact.html

I don't think Resmed would repair a Respironics machine Sleep2Snore although I could be wrong.

I went off on a tangent when my brain stopped working.

Philips Resperonics

Customer Support Centre (Repairs and Maintenance)

0870 532 9741

Reply to Discussion

RSS

Sleep Apnoea Forum

New to the Sleep Apnoea Forum? 

1. Stop by our Sleep Apnoea Welcome Center to introduce yourself to the SleepGuide community.
2. Start a New Topic of Conversation.
3. Post your photos - of yourself, your old CPAP machine, your new CPAP machine, your pet, something about you!

Interested in advertising, have a problem or need to contact us? Click the Report an Issue page.

 

Latest Activity

bonum noctem posted a discussion
yesterday
bonum noctem is now a member of Hope2SleepGuide
yesterday
Kath Hope replied to Linda's discussion Do charities take new surplus CAPD masks?
"I know exactly what you mean Linda. It's good when people purchase them when unsure of their size, but wasteful otherwise.  You can send them to our Hope2Sleep Charity who run this forum and address is on the contact…"
yesterday
Linda posted a discussion

Do charities take new surplus CAPD masks?

when I request a replacement medium Phillips Respironics mask from my NHS provider I am given a pack that includes all size masks and new headgear.  I have queried this and have been advised this is how they are supplied.  It seems a terrible waste.…See More
yesterday
Edam replied to Edam's discussion Double inhaling
"I have finally found the answer  I have increased the EPR to 3 This has kept my pressure below 14 for the last 3 days . Im very annoyed that the hospital and Resmed had not increased this  For some reason increasing the EPR has reduced the…"
Saturday
Glassdaisy joined The SleepGuide Crew's group
Thursday
Edam replied to Edam's discussion Double inhaling
"Its me not the machine. The S9 has been checked by Resmed and no fault was found but the circuit board was changed as a precaution. I have used another S9 but had the same problem. I have been told by the hospital that despite my AHI being under 1…"
Tuesday
Sleep2snore replied to Edam's discussion Double inhaling
"Don't rule out a fault with the machine or restricted airflow. I would also not rule out that you might be one of the few that needs a different machine. In any case, it should not go to 20 and sit there, I would get it checked or replaced. If…"
Tuesday
Edam replied to Edam's discussion Double inhaling
"Before I make a decision I am going to try something different. I have noticed that when it goes up to 20 most times it has done so when the pressure has dropped to minimum which is 12 at present. I will increase the minimum pressure to 14 so…"
Nov 12
Edam replied to Edam's discussion Double inhaling
"I think its time to make a decision. Either buy another make of APAP or get referred to another hospital which supplies a different make"
Nov 12
Sleep2snore replied to Edam's discussion Double inhaling
"That is hard to believe.  A pressure of 20 is quite high and very few require that amount of pressure. 1 ltr/min is nothing, the machine should cope with that without any problems at all. A lot of people get mixed up with pressure and…"
Nov 11
Edam replied to Edam's discussion Double inhaling
"I thought I had this problem solved but it got stuck at 20 again last night. My 95% pressure was 19, AHI  0.1 and leak 1 l/min. Sleepyhead shows that it was stuck at 20 for approx 30 mins ."
Nov 11
Debra Wells is now a member of Hope2SleepGuide
Nov 9
Sleep2snore replied to Ruth Furniss's discussion Cold air
"Don't know what machine ou have, but a heated hose can help a lot. You can get them as a stand alone but it is not ideal. If your machine has the facility for a heated hose it might be worth the investment. Heating the room will help."
Oct 30
Sleep2snore replied to Renee Rowlands's discussion Recommendation please for Oximeter purchase.
"There are plenty on the market, but one thing I would make sure it did was to store the data for printing or downloading. There are plenty that say they do this and don't, so be aware of buying off Amazon or Ebay."
Oct 28
Kath Hope replied to Ruth Furniss's discussion Cold air
"Like you say yourself Ruth, warming up the bedroom will help, but also if you don't have a heated humidifier then that would help - as will covering the tube with a Hose Cover."
Oct 28
Steve Bacall is now a member of Hope2SleepGuide
Oct 28
Ruth Furniss posted a discussion

Cold air

Hi I have sleep apnoea & Copd this is my first winter using cpap, found it very hard to sleep last night because of breathing in cold air was wondering if anyone had any suggestions on how to warm the air up besides sleeping in a warm room? I…See More
Oct 28
Mark Darbyshire is now a member of Hope2SleepGuide
Oct 20
Bill Thomson added a discussion to the group Buy-Sell-Swap
Thumbnail

ResMed DC-DC converter for S9

I have for sale a converter which allows the S9 machine, which requires a 24v supply, to run from a vehicle 12v or 24v DC socket, or direct from a 12v battery. The converter can power a humidifier and heated tube as well as the CPAP machine,…See More
Oct 13

© 2018   Created by The SleepGuide Crew.   Powered by

Badges  |  Report an Issue  |  Terms of Service