Hope2SleepGuide

Sleep Apnoea Forum Bringing Help + Support to the Patient

Hi,

I was given my resmed airsense 10 by the hospital and instructed in its use. At no time were pressures mentioned and i have read of people altering the pressures. As mine is an acap does this mean that the pressure is set automatically by the machine. I tend to be a mouth breather and find the mask pressing on my nose tends to close it so its mouth or nowt.,

Chris

Views: 218

Reply to This

Replies to This Discussion

Hi Chris

I think you mean 'APAP' rather than 'acap' and if so, it will have automatic pressures.  It's not really recommended to alter your own pressures, and people only usually do that in desperation if they don't feel they're getting support from their hospitals, but hopefully you are!  It does sound like you're struggling with the mask though and ideally you should have one that isn't causing your nose to block.  Many of us are mouth breathers, but nose breathing is far more healthy.  I do try to nose breathe as often as I can, but it's impossible to control this when I'm asleep so I have to use a full face mask.  I've actually been under an ENT consultant who has verified I'll never be a proper nose breather!

I hope they set the low pressure up and that it is not left 4 to 20.

I find a lot of people is given machines set up like this and that is not really good.

It is not recommended that you shift the pressures on an NHS machine, the clinic will not be amused.

When I got a new APAP machine they took a guess at what low pressure I would need.

I told them it would not be at that pressure for long.

My last machine was not set at the pressure it was set at when they gave me it either, I told them I shifted it to give me better treatment.  The Sleep Nurse was not happy about it, but her boss didn't appear to be bothered, he just sent her back to ask if I know what I was doing.  Well, I do but I have straight forward OSA and not complicated Apnoea which can be a bit more difficult to treat.

So if you think you do not get enough pressure or your partner say you still snore or you appear to stop breathing, get in touch with the clinic.

If you feel you you are not getting enough air at the low pressure, get in touch with the clinic.

If it is set at 4 and you find it wakes you up when when the pressure rises you need a higher lower pressure.

If you find it hard to breathe out against the machine, you need Expiry Relief turned on.

There are other types of Apnoea, but don't worry about them for now.

Most people are O.S.A. Obstructive Sleep Apnoea with a hint of C.A. Central Apnoea, but unless you forget to breathe, don't worry about it.

If you are a mouth breather I hope they gave you a Full-faced mask or a Hybrid one, though you can get a mouth breathing only mask, but then air will tend to leak out of your nose, so you might need to prevent this.

Reply to Discussion

RSS

Sleep Apnoea Forum

New to the Sleep Apnoea Forum? 

1. Stop by our Sleep Apnoea Welcome Center to introduce yourself to the SleepGuide community.
2. Start a New Topic of Conversation.
3. Post your photos - of yourself, your old CPAP machine, your new CPAP machine, your pet, something about you!

Interested in advertising, have a problem or need to contact us? Click the Report an Issue page.

 

Latest Activity

Jonathan replied to David Hudson's discussion Pressure waking me up. Belching and wind
"Hi It sounds like you need to have more conversations with your sleep clinic.  There's little point in having a high pressure if it means you cannot tolerate the machine.  There's an interesting video here…"
Sunday
David Hudson posted a discussion

Pressure waking me up. Belching and wind

HiI'm using the prisma smart max machine. Initially I was just on a nasal mask, this changed as I was sleeping with my mouth open. I then went to face and nose mask and complained of bad wind and belching. Sometimes the pressure in the night was…See More
Thursday
Jonathan replied to Jonathan's discussion ResMed AirSense 10 getting noisy
"Just to tidy this up, I finally had an in-person review by my sleep clinic yesterday, who agreed the ResMed AirSense 10 was "wheezy" and replaced the machine."
Nov 9
Collette rose replied to Collette rose's discussion 1st time and I’ve failed the mask leak test
"thank you jonathan,i did get the it pack so tried the small and still struggled but i was sat up in bed so will try lying down great suggestion "
Nov 3
Jonathan replied to Collette rose's discussion 1st time and I’ve failed the mask leak test
"Hi My first thought is "don't panic"!  We're all a bit different, and there are many things that can be tweaked.  I took to CPAP therapy like a duck to water, but I've had friends who say they can't cope, but…"
Nov 2
Collette rose posted a discussion

1st time and I’ve failed the mask leak test

Hi everyone, today I received my rental kit - prisma smart max, plus a Philips dreamwear mask which I’ve been wearing unconnected to try and get used to it. I just did a mask fit test using a medium mask and got a constant red/orange leak warning…See More
Nov 2
Collette rose is now a member of Hope2SleepGuide
Oct 31
John posted a discussion
Oct 30
Profile IconBill Wright, Nicole Watson, TJ Bennett and 2 more joined Hope2SleepGuide
Oct 29
John replied to John's discussion evil mask noise
"Ha well it lasted a couple of days but started howling again. But it's a step in the right direction, just needs a bit more work."
Oct 24
Jonathan replied to John's discussion Has anyone been told root cause of their OSA?
"Nope, I just accept that some people's throats tend to close when they sleep, due to a loss of muscle tone during deeper sleep.  Back when I was diagnosed, the sleep lab just filmed you whilst you slept, stuck an O2 meter on your finger,…"
Oct 24
Jonathan replied to John's discussion evil mask noise
"Good to know you found a solution!"
Oct 24
John replied to John's discussion Has anyone been told root cause of their OSA?
"Did anyone tell you exactly what the anatomical issue is, Jonathan?"
Oct 21
John replied to Jonathan's discussion ResMed AirSense 10 getting noisy
"Can't say I know about this."
Oct 20
John replied to John's discussion evil mask noise
"So I tore some fabric from one of the filters and glued it over the holes - and it worked!It was dead quiet, and the air was still flowing freely.It was quiet all night then after a few hours a bit of whistling until I gave it a wipe.Vast…"
Oct 19
John replied to John's discussion evil mask noise
"Hi Jonathan, well see my nose is blocked a lot, so I mouth breath which really sucks a lot more moisture and makes my mouth dry. So I put humidity on maximum, which makes for condensation at the mask end, which becomes a demonic reed instrument.Now…"
Oct 17
Jonathan posted a discussion

ResMed AirSense 10 getting noisy

HelloI have an NHS issued ResMed AirSense 10 with heated humidifier.  In the last couple of weeks, it's developed an annoying noise, when I inhale. It bothers me a little and my partner a lot! I sometimes get problems if the water container in the…See More
Oct 16
Jonathan replied to John's discussion evil mask noise
"Hi My first question is why is condensation forming?  I very occasionally get some condensation, may be once a month, but I can quickly run a finger around the inside of the mask, and wipe it away.  I use a nasal mask, with the humidifier…"
Oct 16
John replied to John's discussion What's a good Apnea forum?
"11K+? Ok that's probably where I should look then :-)"
Oct 16
Kath Hope replied to John's discussion What's a good Apnea forum?
"Hi John. Thanks for the compliment as I do my best popping on here, but it's difficult due to us now supporting 25k+ patients at the charity. To be honest, the forum is quiet because most people seem to prefer Facebook and forums aren't as…"
Oct 16

© 2024   Created by The SleepGuide Crew.   Powered by

Badges  |  Report an Issue  |  Terms of Service