"Yes, it does the job. I use a Powapacs Atom for portable power "
Sleep Apnoea Forum Bringing Help + Support to the Patient
Amara view mask
I am thinking about buying a Amara View mask as the Simplus I use is giving me problems with the forehead support.
Using the fitting gauge my nose measures as a medium but this measures the depth of my nose not the width.
Im concerned that the slot in the nasal part of the mask will be wider than my nose so it would not seal.
Is there a minimum nose width for this mask??
Thanks
I
Views: 180
Replies to This Discussion
-
Permalink Reply by Sleep2snore on
-
There is some information here https://www.cpap.com/blog/amara-view-respironics/ scan down the page to see helpful comments and a guide.
-
Permalink Reply by Edam on
-
Thanks for that.
After looking through 7 pages of reviews I found somebody who had measured the slot at 1in by 0.5 in at its shortest.
As my nose is about 1.25 in wide any movement would cause a major leak.
I wish Respironics would publish a minimum nose width for this mask or even better supply a cushion with a smaller slot
I will post another discussion about my problem with the Simplus
-
-
Edam said:Thanks for that.
After looking through 7 pages of reviews I found somebody who had measured the slot at 1in by 0.5 in at its shortest.
As my nose is about 1.25 in wide any movement would cause a major leak.
I wish Respironics would publish a minimum nose width for this mask or even better supply a cushion with a smaller slot
I will post another discussion about my problem with the Simplus
-
-
Respironics have confirmed that the slot is 2.5cm on the small and mediom cushions and 3 cm on the large
-
-
Hi Edam,
There are several reviews on YouTube about the Amara; the results are very mixed. I tried it and I found that it
leaked too much; a real pity as the idea is very good. I then tried the ResMed F-20 (full-face, no forehead support) and I thought that it was fantastic. I alternate that mask with the Dreamwear with gel cushions.
hope this helps.
About
Sleep Apnoea Forum
New to the Sleep Apnoea Forum?
1. Stop by our Sleep Apnoea Welcome Center to introduce yourself to the SleepGuide community.
2. Start a New Topic of Conversation.
3. Post your photos - of yourself, your old CPAP machine, your new CPAP machine, your pet, something about you!
Interested in advertising, have a problem or need to contact us? Click the Report an Issue page.
Latest Activity
"Hi Nick thanks. Does it do the job and could you camp with it?"
CPAP Total Face Mask
I was curious whether anyone has used the CPAP Total Face Masks and could pass on their observations? I've been using an Airfit F20 for years which is fine apart from the permanent red mark on the bridge of my nose, and have recently tried the…See More
"I've been using the Resmed Airmini for about 5 years when travelling - overall lightweight and small and can be controlled by an App, but it does produce a loud whistling/wind sound for me which hasn't been reduced by an inline filter or…"
"Hi
It sounds like you need to have more conversations with your sleep clinic. There's little point in having a high pressure if it means you cannot tolerate the machine. There's an interesting video here…"
Pressure waking me up. Belching and wind
HiI'm using the prisma smart max machine. Initially I was just on a nasal mask, this changed as I was sleeping with my mouth open. I then went to face and nose mask and complained of bad wind and belching. Sometimes the pressure in the night was…See More
"Just to tidy this up, I finally had an in-person review by my sleep clinic yesterday, who agreed the ResMed AirSense 10 was "wheezy" and replaced the machine."
"thank you jonathan,i did get the it pack so tried the small and still struggled but i was sat up in bed so will try lying down great suggestion "
"Hi
My first thought is "don't panic"! We're all a bit different, and there are many things that can be tweaked. I took to CPAP therapy like a duck to water, but I've had friends who say they can't cope, but…"
1st time and I’ve failed the mask leak test
Hi everyone, today I received my rental kit - prisma smart max, plus a Philips dreamwear mask which I’ve been wearing unconnected to try and get used to it. I just did a mask fit test using a medium mask and got a constant red/orange leak warning…See More
Are every small CPAP machines any good?
Travel sized, micro - any good?See More
"Ha well it lasted a couple of days but started howling again. But it's a step in the right direction, just needs a bit more work."
"Nope, I just accept that some people's throats tend to close when they sleep, due to a loss of muscle tone during deeper sleep. Back when I was diagnosed, the sleep lab just filmed you whilst you slept, stuck an O2 meter on your finger,…"
"Did anyone tell you exactly what the anatomical issue is, Jonathan?"
"Can't say I know about this."
"So I tore some fabric from one of the filters and glued it over the holes - and it worked!It was dead quiet, and the air was still flowing freely.It was quiet all night then after a few hours a bit of whistling until I gave it a wipe.Vast…"
© 2024 Created by The SleepGuide Crew.
Powered by
