Hope2SleepGuide

Sleep Apnoea Forum Bringing Help + Support to the Patient

I have gone back to using a F & P Flexitfit 432 which has resolved the double inhaling and high pressure problem I have had with other masks.

But after using it for a few days now I have found that the back of the headgear cuts into the crease between my neck and back.

I think years ago I used to use different headgear on the 431/432/Forma masks but I cant remember what it was.

What headgear can I use instead of the F & P one?

Views: 132

Reply to This

Replies to This Discussion

Hi Edam.  Good to hear the new mask is helping, and those F & P FlexiFit 431, 432 and Forma's are still a favourite for a lot of people due to the chin support.  (In fact we added the Forma to the charity's website yesterday due to demand).  Years ago when I was struggling the FlexiFit 431 came to my rescue!

When I used it I'm sure I also used the softcap alternative headgear https://www.hope2sleep.co.uk/softcap-alternative-headgear.html or you could look at the cheaper option of the neck comfort strap covers https://www.hope2sleep.co.uk/cpap-mask-neck-comfort-strap-cover.html

I bought the 432 from you and would have gone to the Forma if you sold it at the time.

The under chin design of the Flexifit/ Forma range of masks allow my mouth to stay open. With  nearly every other full face mask my mouth would close during the night and cause the pressure to go up to maximum

I may consider the comfort straps in the future



Kath Hope said:

Hi Edam.  Good to hear the new mask is helping, and those F & P FlexiFit 431, 432 and Forma's are still a favourite for a lot of people due to the chin support.  (In fact we added the Forma to the charity's website yesterday due to demand).  Years ago when I was struggling the FlexiFit 431 came to my rescue!

When I used it I'm sure I also used the softcap alternative headgear https://www.hope2sleep.co.uk/softcap-alternative-headgear.html or you could look at the cheaper option of the neck comfort strap covers https://www.hope2sleep.co.uk/cpap-mask-neck-comfort-strap-cover.html

Ah right.  We only got the Forma yesterday.  I must say I prefer the 431 and 432 but of course we're all different.

I tried the Simplus last night but the 95% pressure went up to 19.5 from 14 on previous nights using the 432.

What can I use to keep my mouth open when using a Full Face Mask???

I honestly don't know Edam, as people usually ask us how to keep their mouths closed rather than open.  It sounds like you need an ENT referral due to severe nasal issues.  I had to have some surgery to breathe better in the masks.

Edam said:

I tried the Simplus last night but the 95% pressure went up to 19.5 from 14 on previous nights using the 432.

What can I use to keep my mouth open when using a Full Face Mask???

I have been seen by  ENT consultants who have diagnosed nasal polyps and a deviated septum. They have considered that surgery is too risky and as one of them said I can still breath through my mouth.

The option of last resort tonight

Oracle Yuck!!!

It's a shame nothing can be done about your polyps and septum, which is no doubt the cause of your issues.  It too hate the Oracle, but there are a lot of people who use it very successfully - just not you or I lol.

How can you get a large leak using a Oracle ?????. 

Kath Hope said:

It's a shame nothing can be done about your polyps and septum, which is no doubt the cause of your issues.  It too hate the Oracle, but there are a lot of people who use it very successfully - just not you or I lol.

Reply to Discussion

RSS

Sleep Apnoea Forum

New to the Sleep Apnoea Forum? 

1. Stop by our Sleep Apnoea Welcome Center to introduce yourself to the SleepGuide community.
2. Start a New Topic of Conversation.
3. Post your photos - of yourself, your old CPAP machine, your new CPAP machine, your pet, something about you!

Interested in advertising, have a problem or need to contact us? Click the Report an Issue page.

 

Latest Activity

Jonathan replied to Jonathan's discussion ResMed AirSense 10 getting noisy
"Just to tidy this up, I finally had an in-person review by my sleep clinic yesterday, who agreed the ResMed AirSense 10 was "wheezy" and replaced the machine."
Saturday
Collette rose replied to Collette rose's discussion 1st time and I’ve failed the mask leak test
"thank you jonathan,i did get the it pack so tried the small and still struggled but i was sat up in bed so will try lying down great suggestion "
Nov 3
Jonathan replied to Collette rose's discussion 1st time and I’ve failed the mask leak test
"Hi My first thought is "don't panic"!  We're all a bit different, and there are many things that can be tweaked.  I took to CPAP therapy like a duck to water, but I've had friends who say they can't cope, but…"
Nov 2
Collette rose posted a discussion

1st time and I’ve failed the mask leak test

Hi everyone, today I received my rental kit - prisma smart max, plus a Philips dreamwear mask which I’ve been wearing unconnected to try and get used to it. I just did a mask fit test using a medium mask and got a constant red/orange leak warning…See More
Nov 2
Collette rose is now a member of Hope2SleepGuide
Oct 31
John posted a discussion
Oct 30
Profile IconBill Wright, Nicole Watson, TJ Bennett and 2 more joined Hope2SleepGuide
Oct 29
John replied to John's discussion evil mask noise
"Ha well it lasted a couple of days but started howling again. But it's a step in the right direction, just needs a bit more work."
Oct 24
Jonathan replied to John's discussion Has anyone been told root cause of their OSA?
"Nope, I just accept that some people's throats tend to close when they sleep, due to a loss of muscle tone during deeper sleep.  Back when I was diagnosed, the sleep lab just filmed you whilst you slept, stuck an O2 meter on your finger,…"
Oct 24
Jonathan replied to John's discussion evil mask noise
"Good to know you found a solution!"
Oct 24
John replied to John's discussion Has anyone been told root cause of their OSA?
"Did anyone tell you exactly what the anatomical issue is, Jonathan?"
Oct 21
John replied to Jonathan's discussion ResMed AirSense 10 getting noisy
"Can't say I know about this."
Oct 20
John replied to John's discussion evil mask noise
"So I tore some fabric from one of the filters and glued it over the holes - and it worked!It was dead quiet, and the air was still flowing freely.It was quiet all night then after a few hours a bit of whistling until I gave it a wipe.Vast…"
Oct 19
John replied to John's discussion evil mask noise
"Hi Jonathan, well see my nose is blocked a lot, so I mouth breath which really sucks a lot more moisture and makes my mouth dry. So I put humidity on maximum, which makes for condensation at the mask end, which becomes a demonic reed instrument.Now…"
Oct 17
Jonathan posted a discussion

ResMed AirSense 10 getting noisy

HelloI have an NHS issued ResMed AirSense 10 with heated humidifier.  In the last couple of weeks, it's developed an annoying noise, when I inhale. It bothers me a little and my partner a lot! I sometimes get problems if the water container in the…See More
Oct 16
Jonathan replied to John's discussion evil mask noise
"Hi My first question is why is condensation forming?  I very occasionally get some condensation, may be once a month, but I can quickly run a finger around the inside of the mask, and wipe it away.  I use a nasal mask, with the humidifier…"
Oct 16
John replied to John's discussion What's a good Apnea forum?
"11K+? Ok that's probably where I should look then :-)"
Oct 16
Kath Hope replied to John's discussion What's a good Apnea forum?
"Hi John. Thanks for the compliment as I do my best popping on here, but it's difficult due to us now supporting 25k+ patients at the charity. To be honest, the forum is quiet because most people seem to prefer Facebook and forums aren't as…"
Oct 16
John posted discussions
Oct 16
Jonathan replied to John's discussion Has anyone been told root cause of their OSA?
"There's some information here, but generally it's very common and likely due to our anatomy."
Oct 12

© 2024   Created by The SleepGuide Crew.   Powered by

Badges  |  Report an Issue  |  Terms of Service