Hope2SleepGuide

Sleep Apnoea Forum Bringing Help + Support to the Patient

Hi.
I'm finding the Airsense 10 the hospital gave me, the humidifier chamber runs dry. It's not even on max settings, which I'm guessing would empty it a lot quicker. Seems like a big design oversight to me. Does anyone else have this trouble? The water supply in the Sleepcube they gave me before would last all night easily, but they don't use them any more.

Views: 295

Reply to This

Replies to This Discussion

I previously had a DeVilbiss Sleepcube and the dehumidifier did sometimes run dry.  On the other hand I now have an AirSense 10 and it never runs dry, and I've had the humidity turned up high.

Wow it's the other way round for me.
I found with the Sleepcube I'd often have a good bit of water still there in the morning.
Today I woke up with a dry tank on the Resmed again, feels horrible, and it's only on 6 humidity and 11 pressure.
I asked the hospital, they don't have Sleepcubes any more.

I had a look round for people modifying the tanks and some create DIY solutions, and I think someone 3D printed a bigger one.

Anyway I emailed Resmed and said nice kit, but can you make a bigger tank?

Do you fill it over the max level line?

I did replace the tank in my SleepCube, and had to regularly take the silicone sealing gasket out and give it a goof clean, but not infrequently found it standing in a pool of water in the morning.  The machine sat on a tray because of this.

The ResMed tank is a lot smaller (and doesn't yet leak!) and I have the machine humidity set around 5, but I've found if it's any higher I get rain-out in the mask.  May be the ResMed adjusts for the room temperature - at the moment the bedroom is around 17C at night time (and I still wake up overheated under a 4.5 tog duvet - that's just me).  There's always water left in the tank in the morning.

Did you try a sleeve for the tube, Jonathan? For rain out? I got one off ebay for a few quid and I think it helps. It's a fleece sleeve  you zip over the main tube.

Yes, I bought some fleecy material and made my own "snuggle hose" 10+ years ago. 

Oh cool. Did you do any other DIY mods?

I made a clamped strap to go on the headboard and lift the tube. Just a spare c-clamp with a bit of nylon strap and a clip but works well.

Neat clip for your hose!

I used to use the Respironics Comfort Curve one of the best masks ever, now discontinued of course.  With its stethoscope-style tubing, I had to make my own fleecy cover.

John said:

Oh cool. Did you do any other DIY mods?

I made a clamped strap to go on the headboard and lift the tube. Just a spare c-clamp with a bit of nylon strap and a clip but works well.

Come to think of it you could likely double up a hose cozy, one over another.

This is a piece of N95 face mask I used for high grade filtration. I just put it where the filter usually goes.
This is around 6 months dirt I would say, thereabouts. I used two for a double layer.

How did you fasten it?

I suppose you could do it with tape or elastic bands. Cut up an old fleece jacket, wrap it round the tube, strap it up, bit of velcro. That sort of thing. I hadn't really thought of that.

Jonathan said:

Yes, I bought some fleecy material and made my own "snuggle hose" 10+ years ago. 

Dab hand with a sewing machine :)  The "stethoscope" pipes were detachable with a bit of careful persuasion.

John said:

How did you fasten it?

I suppose you could do it with tape or elastic bands. Cut up an old fleece jacket, wrap it round the tube, strap it up, bit of velcro. That sort of thing. I hadn't really thought of that.

Jonathan said:

Yes, I bought some fleecy material and made my own "snuggle hose" 10+ years ago. 

Reply to Discussion

RSS

About

Sleep Apnoea Forum

New to the Sleep Apnoea Forum? 

1. Stop by our Sleep Apnoea Welcome Center to introduce yourself to the SleepGuide community.
2. Start a New Topic of Conversation.
3. Post your photos - of yourself, your old CPAP machine, your new CPAP machine, your pet, something about you!

Interested in advertising, have a problem or need to contact us? Click the Report an Issue page.

 

Latest Activity

Jonathan replied to John's discussion Wellu O2 Ring - is it accurate enough for the medics?
"Hi The SleepCube was a private purchase, as way back then my local sleep clinic assessed patients by filming them overnight, whilst wearing an oximeter, and only issued CPAP machines without humidifiers.  There was no remote monitoring and…"
9 hours ago
John replied to John's discussion Wellu O2 Ring - is it accurate enough for the medics?
"Yeah I was wondering about email address. I thought probably if they wanted me to mail them they would have given out an address. I can imagine heart data is considered more acute than sleep data, so it would make more sense to have that…"
yesterday
Jonathan replied to John's discussion Wellu O2 Ring - is it accurate enough for the medics?
"Hi. I didn't use PatientsKnowBest (ironic name), but I have an email address for my heart department for sending in ECGs.  I was just saying that they may be able to review a PDF when then cannot review a data file from your O2 ring. I am…"
yesterday
John replied to John's discussion Wellu O2 Ring - is it accurate enough for the medics?
"Hi Jonathan, did you do that through PatientKnowsBest?"
yesterday
Jonathan replied to John's discussion Wellu O2 Ring - is it accurate enough for the medics?
"On an unrelated topic, I've been able to send ECGs by PDF to my heart clinic. On the subject of Resmed and apnoeas, take a look at https://youtu.be/ufOOAfyzZso?si=Tpdl4EEiCQBZR4iD&t=276 Your machine may be under-reporting. Good…"
yesterday
John posted a discussion

Wellu O2 Ring - is it accurate enough for the medics?

Moving some furniture my long lost O2 ring continuous oxygen saturation monitor turned up. So I've been wearing it and it tells me I have loads of saturation drops during the night even though my Airsense 10 says I have very few apneas.So I get two…See More
Tuesday
Richard Smith replied to Richard Smith's discussion air bubbles after weight loss
"Hi, Just thought I'd give an update.  So, I had my appointment with the NHS sleep clinic which was much quicker than I anticipated and I've now had the overnight sleep study.  My AHI is now 6, down from over 30, so I'm…"
Oct 15
John replied to Sally Gray's discussion Microplastics risks
"Hi Sally from what I read the airsense doesn't suffer the same foam degredation issues as the infamous Phillips machine.I can conceive it's possible that microplastics may be shed from the flexible main tube.What worries me more about the…"
Oct 7
Jonathan replied to Richard Smith's discussion air bubbles after weight loss
"Hi My sleep clinic discharged me, saying they were happy I was self-managing.  Roll on a decade and the cardiologists taking care of me were very unimpressed and I was re-enrolled.  I expect remote monitoring with current generation Resmed…"
Sep 1
Richard Smith replied to Richard Smith's discussion air bubbles after weight loss
"Hi Jonathan, Thanks again for the info.  My cpap *should* be monitored by the NHS though I haven’t had any contact from them since pre-covid.  I checked out the link you gave to access extra data and I think that’s going to be…"
Aug 31
Jonathan replied to Richard Smith's discussion air bubbles after weight loss
"Hi I have the ResMed Airsense 10 Autoset (APAP).  It's monitored remotely by my NHS sleep clinic and I believe they can make changes to the settings.  I don't know whether they are notified if I make changes, nor whether they…"
Aug 31
Richard Smith replied to Richard Smith's discussion air bubbles after weight loss
"Hi Jonathan, Thanks for the reply.  I'd say that I'm fairly technical.  I have the ResMed Airsense 10 Elite machine.  I've discovered that I can upload data wirelessly from my machine and having lowered the pressure by…"
Aug 30
Jonathan replied to Richard Smith's discussion air bubbles after weight loss
"Hi You don't say how technical you are, or what sort of machine you use.  However https://www.sleephq.com/ has software which allows you to upload data from compatible machines, and analyse your sleep "score", including a…"
Aug 29
Richard Smith posted a discussion

air bubbles after weight loss

Hi,I've been on Mounjaro for about 3 months now, not primarily for weight loss, but I have lost weight around my face and neck.  I've noticed that I am increasingly getting air bubbles in my mouth which of course is disturbing my sleep (and my…See More
Aug 28
Sally Gray posted a discussion

Micro plastics risks

I was reading an article in the I newspaper today written by a journalist who had her blood tested for micro plastics and was shocked by the results.…See More
Aug 3
Alison Mitchell is now a member of Hope2SleepGuide
Jul 2
John posted a discussion

job with the charity

Was wondering if there might be a job for me with Hope2Sleep?(I also just asked this of a group by mistake)See More
Jun 27
Tracey Tilley updated their profile
May 22
Sharon Sullivan posted a discussion

For Sale - Ventura Full Total Face CPAP Mask

I’m selling an Ventura Full Total Face CPAP Mask Large and two spare liners.  I bought it new from the Hope2Sleep shop, but it is not suitable for me.  Only used for about two weeks so I have washed it thoroughly.   Because of this, it is very much…See More
May 17
Tracey Tilley replied to Jim Scullion's discussion UK Attendance Allowance
"I put in a claim for PIP which was denied and now I am over 66 and on pension I tried for AA. Denied again.I have other health conditions ( Diverticular disease and Bile Acid Malabsorbtion ) which I consider hard to live with and they refused all of…"
May 14

© 2025   Created by The SleepGuide Crew.   Powered by

Badges  |  Report an Issue  |  Terms of Service