Hope2SleepGuide

Sleep Apnoea Forum Bringing Help + Support to the Patient

Hi.
I'm finding the Airsense 10 the hospital gave me, the humidifier chamber runs dry. It's not even on max settings, which I'm guessing would empty it a lot quicker. Seems like a big design oversight to me. Does anyone else have this trouble? The water supply in the Sleepcube they gave me before would last all night easily, but they don't use them any more.

Views: 247

Reply to This

Replies to This Discussion

I previously had a DeVilbiss Sleepcube and the dehumidifier did sometimes run dry.  On the other hand I now have an AirSense 10 and it never runs dry, and I've had the humidity turned up high.

Wow it's the other way round for me.
I found with the Sleepcube I'd often have a good bit of water still there in the morning.
Today I woke up with a dry tank on the Resmed again, feels horrible, and it's only on 6 humidity and 11 pressure.
I asked the hospital, they don't have Sleepcubes any more.

I had a look round for people modifying the tanks and some create DIY solutions, and I think someone 3D printed a bigger one.

Anyway I emailed Resmed and said nice kit, but can you make a bigger tank?

Do you fill it over the max level line?

I did replace the tank in my SleepCube, and had to regularly take the silicone sealing gasket out and give it a goof clean, but not infrequently found it standing in a pool of water in the morning.  The machine sat on a tray because of this.

The ResMed tank is a lot smaller (and doesn't yet leak!) and I have the machine humidity set around 5, but I've found if it's any higher I get rain-out in the mask.  May be the ResMed adjusts for the room temperature - at the moment the bedroom is around 17C at night time (and I still wake up overheated under a 4.5 tog duvet - that's just me).  There's always water left in the tank in the morning.

Did you try a sleeve for the tube, Jonathan? For rain out? I got one off ebay for a few quid and I think it helps. It's a fleece sleeve  you zip over the main tube.

Yes, I bought some fleecy material and made my own "snuggle hose" 10+ years ago. 

Oh cool. Did you do any other DIY mods?

I made a clamped strap to go on the headboard and lift the tube. Just a spare c-clamp with a bit of nylon strap and a clip but works well.

Neat clip for your hose!

I used to use the Respironics Comfort Curve one of the best masks ever, now discontinued of course.  With its stethoscope-style tubing, I had to make my own fleecy cover.

John said:

Oh cool. Did you do any other DIY mods?

I made a clamped strap to go on the headboard and lift the tube. Just a spare c-clamp with a bit of nylon strap and a clip but works well.

Come to think of it you could likely double up a hose cozy, one over another.

This is a piece of N95 face mask I used for high grade filtration. I just put it where the filter usually goes.
This is around 6 months dirt I would say, thereabouts. I used two for a double layer.

How did you fasten it?

I suppose you could do it with tape or elastic bands. Cut up an old fleece jacket, wrap it round the tube, strap it up, bit of velcro. That sort of thing. I hadn't really thought of that.

Jonathan said:

Yes, I bought some fleecy material and made my own "snuggle hose" 10+ years ago. 

Dab hand with a sewing machine :)  The "stethoscope" pipes were detachable with a bit of careful persuasion.

John said:

How did you fasten it?

I suppose you could do it with tape or elastic bands. Cut up an old fleece jacket, wrap it round the tube, strap it up, bit of velcro. That sort of thing. I hadn't really thought of that.

Jonathan said:

Yes, I bought some fleecy material and made my own "snuggle hose" 10+ years ago. 

Reply to Discussion

RSS

Sleep Apnoea Forum

New to the Sleep Apnoea Forum? 

1. Stop by our Sleep Apnoea Welcome Center to introduce yourself to the SleepGuide community.
2. Start a New Topic of Conversation.
3. Post your photos - of yourself, your old CPAP machine, your new CPAP machine, your pet, something about you!

Interested in advertising, have a problem or need to contact us? Click the Report an Issue page.

 

Latest Activity

Nick Daniel replied to John's discussion Are every small CPAP machines any good?
"Yes, it does the job. I use a Powapacs Atom for portable power "
Dec 18
John replied to John's discussion Are every small CPAP machines any good?
"Hi Nick thanks. Does it do the job and could you camp with it?"
Dec 18
Nick Daniel posted a discussion

CPAP Total Face Mask

I was curious whether anyone has used the CPAP Total Face Masks and could pass on their observations? I've been using an Airfit F20 for years which is fine apart from the permanent red mark on the bridge of my nose, and have recently tried the…See More
Dec 17
Nick Daniel replied to John's discussion Are every small CPAP machines any good?
"I've been using the Resmed Airmini for about 5 years when travelling - overall lightweight and small and can be controlled by an App, but it does produce a loud whistling/wind sound for me which hasn't been reduced by an inline filter or…"
Dec 17
Greg Lloyd is now a member of Hope2SleepGuide
Dec 6
Jonathan replied to David Hudson's discussion Pressure waking me up. Belching and wind
"Hi It sounds like you need to have more conversations with your sleep clinic.  There's little point in having a high pressure if it means you cannot tolerate the machine.  There's an interesting video here…"
Dec 1
David Hudson posted a discussion

Pressure waking me up. Belching and wind

HiI'm using the prisma smart max machine. Initially I was just on a nasal mask, this changed as I was sleeping with my mouth open. I then went to face and nose mask and complained of bad wind and belching. Sometimes the pressure in the night was…See More
Nov 28
Jonathan replied to Jonathan's discussion ResMed AirSense 10 getting noisy
"Just to tidy this up, I finally had an in-person review by my sleep clinic yesterday, who agreed the ResMed AirSense 10 was "wheezy" and replaced the machine."
Nov 9
Collette rose replied to Collette rose's discussion 1st time and I’ve failed the mask leak test
"thank you jonathan,i did get the it pack so tried the small and still struggled but i was sat up in bed so will try lying down great suggestion "
Nov 3
Jonathan replied to Collette rose's discussion 1st time and I’ve failed the mask leak test
"Hi My first thought is "don't panic"!  We're all a bit different, and there are many things that can be tweaked.  I took to CPAP therapy like a duck to water, but I've had friends who say they can't cope, but…"
Nov 2
Collette rose posted a discussion

1st time and I’ve failed the mask leak test

Hi everyone, today I received my rental kit - prisma smart max, plus a Philips dreamwear mask which I’ve been wearing unconnected to try and get used to it. I just did a mask fit test using a medium mask and got a constant red/orange leak warning…See More
Nov 2
Collette rose is now a member of Hope2SleepGuide
Oct 31
John posted a discussion
Oct 30
Profile IconBill Wright, Nicole Watson, TJ Bennett and 2 more joined Hope2SleepGuide
Oct 29
John replied to John's discussion evil mask noise
"Ha well it lasted a couple of days but started howling again. But it's a step in the right direction, just needs a bit more work."
Oct 24
Jonathan replied to John's discussion Has anyone been told root cause of their OSA?
"Nope, I just accept that some people's throats tend to close when they sleep, due to a loss of muscle tone during deeper sleep.  Back when I was diagnosed, the sleep lab just filmed you whilst you slept, stuck an O2 meter on your finger,…"
Oct 24
Jonathan replied to John's discussion evil mask noise
"Good to know you found a solution!"
Oct 24
John replied to John's discussion Has anyone been told root cause of their OSA?
"Did anyone tell you exactly what the anatomical issue is, Jonathan?"
Oct 21
John replied to Jonathan's discussion ResMed AirSense 10 getting noisy
"Can't say I know about this."
Oct 20
John replied to John's discussion evil mask noise
"So I tore some fabric from one of the filters and glued it over the holes - and it worked!It was dead quiet, and the air was still flowing freely.It was quiet all night then after a few hours a bit of whistling until I gave it a wipe.Vast…"
Oct 19

© 2024   Created by The SleepGuide Crew.   Powered by

Badges  |  Report an Issue  |  Terms of Service