Hope2SleepGuide

Sleep Apnoea Forum Bringing Help + Support to the Patient

The hospital swapped out my sleep cube for an Airsense 2 about a year ago.
Now the machine reports my sleep quality to them over the airwaves.
I've never been convinced that these reports are accurate because, even though the hospital staff are breezily confident about them, I still feel knackered.

I watched a you tubevideo just now about the flags that the machine uses to report an apnea. It seem like you can still have disturbed breathing, but the machine won't flag it as an apnea or hypoxia.

Early days on this, I've just started looking into it, but does this ring a bell?

Does anyone know how the reports from their machine compare with an independent device like an oxygen/heart rate monitor?

thanks

Views: 142

Reply to This

Replies to This Discussion

The hospitals see far more than we see on the app in their clinical software, and do bear in mind that it's the opinion of a Youtuber you must have seen, as sleep professionals worldwide have used their software for many years, and Resmed's software, along with the clinical software from other manufacturers, are very well respected and important to the sleep clinicians.

If you're not feeling good and your AHI is 5 or below then it may help to check your oxygen levels and you'll need an overnight recording pulse oximeter, such as Nonin 3150 (expensive) or Viatom etc (don't rely on a smart watch). You do have to bear in mind though that oxygen desaturations can also be from other causes, as well as apnoeas. It would be a good place to start though.

Also, if all seems to be going well with your CPAP therapy, there's other things that can cause daytime tiredness - some often common in sleep apnoea, so blood tests for thyroid, diabetes, iron, B12 and Vit D are all worth doing. Plus checking the side effects of any regular medication you take as lots of meds cause tiredness and some also cause disruptions to sleep. Oh and also make sure you're getting a good 7-9 hours sleep every night with your CPAP.

Hi Kath, I did get myself an O2 Ring, but it hid behind some furniture somewhere and won't come out. When I find it I can check what's going on. I read that, like you say, smart watches aren't that good so I went for dedicated kit with a high sample rate. I got the OSCAR software which breaks out a load of info from resmed SD cards
I agree you have to be a bit streetwise with what blokes on youtube say. I don't quite know what to make of it. It was this


regards,
John

The o2 ring is good if you can retrieve it 😂

Yes I've seen Nick's videos and he has a lot of great content, but it doesn't mean everything is 100% correct (same for us all as we just try our best with the knowledge we have). Oscar is very good and reports very similar to Resmed. Nick uses his own software which I've never used so can't comment, but millions of sleep professionals use Resmed's software and I'm sure any issues would have been picked up over the many years it's been used if it was unreliable.

As I said in the last comment, there can be so many reasons why remaining tiredness continues, and because we have a sleep disorder we tend to be quick to blame that. To complicate things even further, sometimes there can be hidden problems though that don't always show up on the CPAP results as it's not possible. As an example, my CPAP therapy was 100% spot on, but what wasn't realised is that I was retaining co2, which is more common in obesity which I aren't, but can also happen with over conditions like COPD, neuromuscular problems etc (my reason isn't know as I'm always a mystery lol). The only way of confirming co2 retention (also called hypercapnia or hypoventilation) is to have arterial blood gases (ABG) done.

I'd suggest (assuming your AHI is 5 or below and you're getting 7-9 hours sleep) getting your oxygen checked and also those blood tests done I mentioned, then if all come up fine, it's time to speak with your clinic for further investigation.

John said:

Hi Kath, I did get myself an O2 Ring, but it hid behind some furniture somewhere and won't come out. When I find it I can check what's going on. I read that, like you say, smart watches aren't that good so I went for dedicated kit with a high sample rate. I got the OSCAR software which breaks out a load of info from resmed SD cards
I agree you have to be a bit streetwise with what blokes on youtube say. I don't quite know what to make of it. It was this


regards,
John

Hi Kath, thanks for your great answer. I think even if the CPAP was perfect it's the other rigmarole interferes with sleep, for me anyway - oh the pipe's gurgling, oh didn't shave and have to tighten everything, oh the temperature changed and now the condensation on the mask is whistling, oh I didn't refill the tank enough etc etc - all those constant tweaks.
I don't know if other people fiddle constantly with the kit, maybe they find it easier to settle on one set up.

One thing I've found is my nose can't be relied upon to stay clear so it's a nasal mask one day, then wake up with it stuffed so back to a full face, then a pillow because it feels clear again and so on.

I found I may have nasal valve collapse, if I do the Cottle procedure the air flow is like day to night it feels so much better. One of those things you don't realise is abnormal because you've always had it. I hope I can find a GP who knows about it and can tell me what's what.

So I use a silicone nostril expander, "Brez", which makes things feel much better and can go under a mask, but I worry that any mask pressing even lightly on the bridge of the nose will close already half closed nostrils. I think when you're asleep things can move around and without knowing it the nice nasal flow gets shut off.

Nose breathing, I'm given to understand, is the best way and mouth breathing can have negative consequences.

I did address the whistling vents on the mask by rubbing a little oil on the inside, a fine smear of veg oil that I hoped wouldn't hurt the plastic. I figured if I put something hydrophobic on then water won't collect so easily. It seemed to mitigate the whistling somewhat.

I'd have thought having a design with fewer, bigger holes would give the same vent flow but without being blocked so easily with water drops and turning into a whistle.

I never heard of co2 retention I'll have to look that up.

Hope some of that is helpful to others.

thanks,

John

Reply to Discussion

RSS

Sleep Apnoea Forum

New to the Sleep Apnoea Forum? 

1. Stop by our Sleep Apnoea Welcome Center to introduce yourself to the SleepGuide community.
2. Start a New Topic of Conversation.
3. Post your photos - of yourself, your old CPAP machine, your new CPAP machine, your pet, something about you!

Interested in advertising, have a problem or need to contact us? Click the Report an Issue page.

 

Latest Activity

Jonathan replied to David Hudson's discussion Pressure waking me up. Belching and wind
"Hi It sounds like you need to have more conversations with your sleep clinic.  There's little point in having a high pressure if it means you cannot tolerate the machine.  There's an interesting video here…"
Sunday
David Hudson posted a discussion

Pressure waking me up. Belching and wind

HiI'm using the prisma smart max machine. Initially I was just on a nasal mask, this changed as I was sleeping with my mouth open. I then went to face and nose mask and complained of bad wind and belching. Sometimes the pressure in the night was…See More
Thursday
Jonathan replied to Jonathan's discussion ResMed AirSense 10 getting noisy
"Just to tidy this up, I finally had an in-person review by my sleep clinic yesterday, who agreed the ResMed AirSense 10 was "wheezy" and replaced the machine."
Nov 9
Collette rose replied to Collette rose's discussion 1st time and I’ve failed the mask leak test
"thank you jonathan,i did get the it pack so tried the small and still struggled but i was sat up in bed so will try lying down great suggestion "
Nov 3
Jonathan replied to Collette rose's discussion 1st time and I’ve failed the mask leak test
"Hi My first thought is "don't panic"!  We're all a bit different, and there are many things that can be tweaked.  I took to CPAP therapy like a duck to water, but I've had friends who say they can't cope, but…"
Nov 2
Collette rose posted a discussion

1st time and I’ve failed the mask leak test

Hi everyone, today I received my rental kit - prisma smart max, plus a Philips dreamwear mask which I’ve been wearing unconnected to try and get used to it. I just did a mask fit test using a medium mask and got a constant red/orange leak warning…See More
Nov 2
Collette rose is now a member of Hope2SleepGuide
Oct 31
John posted a discussion
Oct 30
Profile IconBill Wright, Nicole Watson, TJ Bennett and 2 more joined Hope2SleepGuide
Oct 29
John replied to John's discussion evil mask noise
"Ha well it lasted a couple of days but started howling again. But it's a step in the right direction, just needs a bit more work."
Oct 24
Jonathan replied to John's discussion Has anyone been told root cause of their OSA?
"Nope, I just accept that some people's throats tend to close when they sleep, due to a loss of muscle tone during deeper sleep.  Back when I was diagnosed, the sleep lab just filmed you whilst you slept, stuck an O2 meter on your finger,…"
Oct 24
Jonathan replied to John's discussion evil mask noise
"Good to know you found a solution!"
Oct 24
John replied to John's discussion Has anyone been told root cause of their OSA?
"Did anyone tell you exactly what the anatomical issue is, Jonathan?"
Oct 21
John replied to Jonathan's discussion ResMed AirSense 10 getting noisy
"Can't say I know about this."
Oct 20
John replied to John's discussion evil mask noise
"So I tore some fabric from one of the filters and glued it over the holes - and it worked!It was dead quiet, and the air was still flowing freely.It was quiet all night then after a few hours a bit of whistling until I gave it a wipe.Vast…"
Oct 19
John replied to John's discussion evil mask noise
"Hi Jonathan, well see my nose is blocked a lot, so I mouth breath which really sucks a lot more moisture and makes my mouth dry. So I put humidity on maximum, which makes for condensation at the mask end, which becomes a demonic reed instrument.Now…"
Oct 17
Jonathan posted a discussion

ResMed AirSense 10 getting noisy

HelloI have an NHS issued ResMed AirSense 10 with heated humidifier.  In the last couple of weeks, it's developed an annoying noise, when I inhale. It bothers me a little and my partner a lot! I sometimes get problems if the water container in the…See More
Oct 16
Jonathan replied to John's discussion evil mask noise
"Hi My first question is why is condensation forming?  I very occasionally get some condensation, may be once a month, but I can quickly run a finger around the inside of the mask, and wipe it away.  I use a nasal mask, with the humidifier…"
Oct 16
John replied to John's discussion What's a good Apnea forum?
"11K+? Ok that's probably where I should look then :-)"
Oct 16
Kath Hope replied to John's discussion What's a good Apnea forum?
"Hi John. Thanks for the compliment as I do my best popping on here, but it's difficult due to us now supporting 25k+ patients at the charity. To be honest, the forum is quiet because most people seem to prefer Facebook and forums aren't as…"
Oct 16

© 2024   Created by The SleepGuide Crew.   Powered by

Badges  |  Report an Issue  |  Terms of Service