Hope2SleepGuide

Sleep Apnoea Forum Bringing Help + Support to the Patient

I have been using above machine for years on autoset mode. as the pressures are getting quite high I decided to engage the EPR function. nowhere on the clinical menu or standard menu is there any mention of EPR. I turned the machine to CPAP Mode and there is option on standard menu and clinical menu to set and adjust the settings for EPR. I am totally baffled by this. the literature I have looked at says there should be and option to engage EPR during Autoset Mode. maybe the machine is faulty. any advice would be great. The hospital no longer support this machine and offered a non autoset S9 which has no access to compliance data etc so I prefer my autoset machine.

Regards

Ged

Views: 268

Reply to This

Replies to This Discussion

As you know Ged the S8 Spirit is an old machine, and I understand why you're loathe to give it up if your clinic supplies machines with no data.  I do recall from many years ago there was talk that the international version of the Auto Spirit didn't have EPR, even though the USA version did.  However, it seems strange that it's available on CPAP mode but not on APAP, and I can't remember if that was an issue.  If it's not in the clinical settings it might be the case.  You could try calling Resmed on 0800 917 7071 to see if they can help, although they'll probably try to talk you into upgrading lol.

It should be there, but may be locked out.

Manual S8 Series II

Thanks for your replies. I have looked at the manual and as advised there should be EPR on autoset. I have done a factory reset on the machine and still no EPR on autoset yet still there on CPAP. I am guessing that there is no EPR facility on this variant for autoset. I will just have to deal with it using autoset as a diagnostic for correct pressure from time to time and use CPAP as my regular setting. hopefully pressures will go back down if I can lose some weight.

It may be what I suspected, that it wasn't available on your international version, as I remember people complaining about it many years ago.  If it helps to know I never found EPR helpful when I was on CPAP (I'm on VPAP now).  Hope your old failthful machine keeps going for a long time to come and good luck with the weight loss.

I can't see why they would have it on CPAP and not on AUTO, I suspect it has been locked out by sleep clinic, resetting will not help.

It might be right that earlier models might not have EPR as I do remember seeing something about that, but why would it be on CPAP and not an APAP?

I would contact the manufacturer ResMed to confirm it either has or has not got it.

I found ResMed to be helpful enough in the past when I have contacted them, though they will not help when it comes to repairs etc, it s a case of it has to be repaired by them or their agents, which is only sleep lads and they send them to ResMed.

I would give them a phone or email them.

I just can't get my head round why they would have it on CPAP and not on APAP?

I never used to use EPR on my old machines, but with this new one I am forced to as if I don't the Nasal Pillows jump when I breath out and this wakes me up.  ResMed 0800 917 7071 or fill in the form at   ResMed Contact us.

There is a email address on this page if you want to contact them direct.

ResMed Mysleep - Customer/user contact.

Ah!  this is in quote mode, however as I am lazy it should still work, wait or I test it, YES it does.

Reply to Discussion

RSS

Sleep Apnoea Forum

New to the Sleep Apnoea Forum? 

1. Stop by our Sleep Apnoea Welcome Center to introduce yourself to the SleepGuide community.
2. Start a New Topic of Conversation.
3. Post your photos - of yourself, your old CPAP machine, your new CPAP machine, your pet, something about you!

Interested in advertising, have a problem or need to contact us? Click the Report an Issue page.

 

Latest Activity

Nick Daniel replied to John's discussion Are every small CPAP machines any good?
"Yes, it does the job. I use a Powapacs Atom for portable power "
Wednesday
John replied to John's discussion Are every small CPAP machines any good?
"Hi Nick thanks. Does it do the job and could you camp with it?"
Wednesday
Nick Daniel posted a discussion

CPAP Total Face Mask

I was curious whether anyone has used the CPAP Total Face Masks and could pass on their observations? I've been using an Airfit F20 for years which is fine apart from the permanent red mark on the bridge of my nose, and have recently tried the…See More
Tuesday
Nick Daniel replied to John's discussion Are every small CPAP machines any good?
"I've been using the Resmed Airmini for about 5 years when travelling - overall lightweight and small and can be controlled by an App, but it does produce a loud whistling/wind sound for me which hasn't been reduced by an inline filter or…"
Tuesday
Greg Lloyd is now a member of Hope2SleepGuide
Dec 6
Jonathan replied to David Hudson's discussion Pressure waking me up. Belching and wind
"Hi It sounds like you need to have more conversations with your sleep clinic.  There's little point in having a high pressure if it means you cannot tolerate the machine.  There's an interesting video here…"
Dec 1
David Hudson posted a discussion

Pressure waking me up. Belching and wind

HiI'm using the prisma smart max machine. Initially I was just on a nasal mask, this changed as I was sleeping with my mouth open. I then went to face and nose mask and complained of bad wind and belching. Sometimes the pressure in the night was…See More
Nov 28
Jonathan replied to Jonathan's discussion ResMed AirSense 10 getting noisy
"Just to tidy this up, I finally had an in-person review by my sleep clinic yesterday, who agreed the ResMed AirSense 10 was "wheezy" and replaced the machine."
Nov 9
Collette rose replied to Collette rose's discussion 1st time and I’ve failed the mask leak test
"thank you jonathan,i did get the it pack so tried the small and still struggled but i was sat up in bed so will try lying down great suggestion "
Nov 3
Jonathan replied to Collette rose's discussion 1st time and I’ve failed the mask leak test
"Hi My first thought is "don't panic"!  We're all a bit different, and there are many things that can be tweaked.  I took to CPAP therapy like a duck to water, but I've had friends who say they can't cope, but…"
Nov 2
Collette rose posted a discussion

1st time and I’ve failed the mask leak test

Hi everyone, today I received my rental kit - prisma smart max, plus a Philips dreamwear mask which I’ve been wearing unconnected to try and get used to it. I just did a mask fit test using a medium mask and got a constant red/orange leak warning…See More
Nov 2
Collette rose is now a member of Hope2SleepGuide
Oct 31
John posted a discussion
Oct 30
Profile IconBill Wright, Nicole Watson, TJ Bennett and 2 more joined Hope2SleepGuide
Oct 29
John replied to John's discussion evil mask noise
"Ha well it lasted a couple of days but started howling again. But it's a step in the right direction, just needs a bit more work."
Oct 24
Jonathan replied to John's discussion Has anyone been told root cause of their OSA?
"Nope, I just accept that some people's throats tend to close when they sleep, due to a loss of muscle tone during deeper sleep.  Back when I was diagnosed, the sleep lab just filmed you whilst you slept, stuck an O2 meter on your finger,…"
Oct 24
Jonathan replied to John's discussion evil mask noise
"Good to know you found a solution!"
Oct 24
John replied to John's discussion Has anyone been told root cause of their OSA?
"Did anyone tell you exactly what the anatomical issue is, Jonathan?"
Oct 21
John replied to Jonathan's discussion ResMed AirSense 10 getting noisy
"Can't say I know about this."
Oct 20
John replied to John's discussion evil mask noise
"So I tore some fabric from one of the filters and glued it over the holes - and it worked!It was dead quiet, and the air was still flowing freely.It was quiet all night then after a few hours a bit of whistling until I gave it a wipe.Vast…"
Oct 19

© 2024   Created by The SleepGuide Crew.   Powered by

Badges  |  Report an Issue  |  Terms of Service