Hope2SleepGuide

Sleep Apnoea Forum Bringing Help + Support to the Patient

I have been using above machine for years on autoset mode. as the pressures are getting quite high I decided to engage the EPR function. nowhere on the clinical menu or standard menu is there any mention of EPR. I turned the machine to CPAP Mode and there is option on standard menu and clinical menu to set and adjust the settings for EPR. I am totally baffled by this. the literature I have looked at says there should be and option to engage EPR during Autoset Mode. maybe the machine is faulty. any advice would be great. The hospital no longer support this machine and offered a non autoset S9 which has no access to compliance data etc so I prefer my autoset machine.

Regards

Ged

Views: 268

Reply to This

Replies to This Discussion

As you know Ged the S8 Spirit is an old machine, and I understand why you're loathe to give it up if your clinic supplies machines with no data.  I do recall from many years ago there was talk that the international version of the Auto Spirit didn't have EPR, even though the USA version did.  However, it seems strange that it's available on CPAP mode but not on APAP, and I can't remember if that was an issue.  If it's not in the clinical settings it might be the case.  You could try calling Resmed on 0800 917 7071 to see if they can help, although they'll probably try to talk you into upgrading lol.

It should be there, but may be locked out.

Manual S8 Series II

Thanks for your replies. I have looked at the manual and as advised there should be EPR on autoset. I have done a factory reset on the machine and still no EPR on autoset yet still there on CPAP. I am guessing that there is no EPR facility on this variant for autoset. I will just have to deal with it using autoset as a diagnostic for correct pressure from time to time and use CPAP as my regular setting. hopefully pressures will go back down if I can lose some weight.

It may be what I suspected, that it wasn't available on your international version, as I remember people complaining about it many years ago.  If it helps to know I never found EPR helpful when I was on CPAP (I'm on VPAP now).  Hope your old failthful machine keeps going for a long time to come and good luck with the weight loss.

I can't see why they would have it on CPAP and not on AUTO, I suspect it has been locked out by sleep clinic, resetting will not help.

It might be right that earlier models might not have EPR as I do remember seeing something about that, but why would it be on CPAP and not an APAP?

I would contact the manufacturer ResMed to confirm it either has or has not got it.

I found ResMed to be helpful enough in the past when I have contacted them, though they will not help when it comes to repairs etc, it s a case of it has to be repaired by them or their agents, which is only sleep lads and they send them to ResMed.

I would give them a phone or email them.

I just can't get my head round why they would have it on CPAP and not on APAP?

I never used to use EPR on my old machines, but with this new one I am forced to as if I don't the Nasal Pillows jump when I breath out and this wakes me up.  ResMed 0800 917 7071 or fill in the form at   ResMed Contact us.

There is a email address on this page if you want to contact them direct.

ResMed Mysleep - Customer/user contact.

Ah!  this is in quote mode, however as I am lazy it should still work, wait or I test it, YES it does.

Reply to Discussion

RSS

Sleep Apnoea Forum

New to the Sleep Apnoea Forum? 

1. Stop by our Sleep Apnoea Welcome Center to introduce yourself to the SleepGuide community.
2. Start a New Topic of Conversation.
3. Post your photos - of yourself, your old CPAP machine, your new CPAP machine, your pet, something about you!

Interested in advertising, have a problem or need to contact us? Click the Report an Issue page.

 

Latest Activity

Jonathan replied to Jonathan's discussion ResMed AirSense 10 getting noisy
"Just to tidy this up, I finally had an in-person review by my sleep clinic yesterday, who agreed the ResMed AirSense 10 was "wheezy" and replaced the machine."
Nov 9
Collette rose replied to Collette rose's discussion 1st time and I’ve failed the mask leak test
"thank you jonathan,i did get the it pack so tried the small and still struggled but i was sat up in bed so will try lying down great suggestion "
Nov 3
Jonathan replied to Collette rose's discussion 1st time and I’ve failed the mask leak test
"Hi My first thought is "don't panic"!  We're all a bit different, and there are many things that can be tweaked.  I took to CPAP therapy like a duck to water, but I've had friends who say they can't cope, but…"
Nov 2
Collette rose posted a discussion

1st time and I’ve failed the mask leak test

Hi everyone, today I received my rental kit - prisma smart max, plus a Philips dreamwear mask which I’ve been wearing unconnected to try and get used to it. I just did a mask fit test using a medium mask and got a constant red/orange leak warning…See More
Nov 2
Collette rose is now a member of Hope2SleepGuide
Oct 31
John posted a discussion
Oct 30
Profile IconBill Wright, Nicole Watson, TJ Bennett and 2 more joined Hope2SleepGuide
Oct 29
John replied to John's discussion evil mask noise
"Ha well it lasted a couple of days but started howling again. But it's a step in the right direction, just needs a bit more work."
Oct 24
Jonathan replied to John's discussion Has anyone been told root cause of their OSA?
"Nope, I just accept that some people's throats tend to close when they sleep, due to a loss of muscle tone during deeper sleep.  Back when I was diagnosed, the sleep lab just filmed you whilst you slept, stuck an O2 meter on your finger,…"
Oct 24
Jonathan replied to John's discussion evil mask noise
"Good to know you found a solution!"
Oct 24
John replied to John's discussion Has anyone been told root cause of their OSA?
"Did anyone tell you exactly what the anatomical issue is, Jonathan?"
Oct 21
John replied to Jonathan's discussion ResMed AirSense 10 getting noisy
"Can't say I know about this."
Oct 20
John replied to John's discussion evil mask noise
"So I tore some fabric from one of the filters and glued it over the holes - and it worked!It was dead quiet, and the air was still flowing freely.It was quiet all night then after a few hours a bit of whistling until I gave it a wipe.Vast…"
Oct 19
John replied to John's discussion evil mask noise
"Hi Jonathan, well see my nose is blocked a lot, so I mouth breath which really sucks a lot more moisture and makes my mouth dry. So I put humidity on maximum, which makes for condensation at the mask end, which becomes a demonic reed instrument.Now…"
Oct 17
Jonathan posted a discussion

ResMed AirSense 10 getting noisy

HelloI have an NHS issued ResMed AirSense 10 with heated humidifier.  In the last couple of weeks, it's developed an annoying noise, when I inhale. It bothers me a little and my partner a lot! I sometimes get problems if the water container in the…See More
Oct 16
Jonathan replied to John's discussion evil mask noise
"Hi My first question is why is condensation forming?  I very occasionally get some condensation, may be once a month, but I can quickly run a finger around the inside of the mask, and wipe it away.  I use a nasal mask, with the humidifier…"
Oct 16
John replied to John's discussion What's a good Apnea forum?
"11K+? Ok that's probably where I should look then :-)"
Oct 16
Kath Hope replied to John's discussion What's a good Apnea forum?
"Hi John. Thanks for the compliment as I do my best popping on here, but it's difficult due to us now supporting 25k+ patients at the charity. To be honest, the forum is quiet because most people seem to prefer Facebook and forums aren't as…"
Oct 16
John posted discussions
Oct 16
Jonathan replied to John's discussion Has anyone been told root cause of their OSA?
"There's some information here, but generally it's very common and likely due to our anatomy."
Oct 12

© 2024   Created by The SleepGuide Crew.   Powered by

Badges  |  Report an Issue  |  Terms of Service