Hope2SleepGuide

Sleep Apnoea Forum Bringing Help + Support to the Patient

All the tips I've read regarding cleaning the humidifier state regularly washing with a gentle soap and water and only using distilled water. I've been using boiled, cooled water and assumed this was OK. My humidifier has gone white and crazed and the seal is going mouldy. Fortunately my sleep clinic is happy to provide a replacement but I'd like to know if anyone can offer advice on how to prevent it happening again. 

Many thanks. 

Views: 74

Reply to This

Replies to This Discussion

Hi Maxine

That advice is correct, except you really want to be giving a deeper clean once a week with a more natural disinfecting regime.  The manufacturers recommend doing this with 1 part of white vinegar to 5 parts water and leaving to soak.  Some people use lemon juice instead, and also use an old toothbrush to try to get rid of any limescale build-up.
It's true that distilled water is best (NOT deionised though which isn't for respiratory equipment) but the problem is that distilled is expensive here, whereas very cheap in the USA and other parts of the world.  If you live in a hardwater area our problem is worse.  To be honest, I do buy distilled water for my machine due to living in a very bad hardwater area, but as I said it's not cheap.  Here's a link to the one I buy on Amazon http://amazon.co.uk/gp/product/B07BSJ9T8S/ or you can buy a water distiller to make your own which is more cost-effective.
If you don't want to use distilled water, you can continue with cooled boiled tap water, but will just have to clean/disinfect more often.

Thanks so much for the advice. I now have my new one and will try the water/vinegar regime. Yes, we do live in a very hard water area which doesn't help so I'll give the distilled water a go too. Many thanks 

Kath Hope said:

Hi Maxine

That advice is correct, except you really want to be giving a deeper clean once a week with a more natural disinfecting regime.  The manufacturers recommend doing this with 1 part of white vinegar to 5 parts water and leaving to soak.  Some people use lemon juice instead, and also use an old toothbrush to try to get rid of any limescale build-up.
It's true that distilled water is best (NOT deionised though which isn't for respiratory equipment) but the problem is that distilled is expensive here, whereas very cheap in the USA and other parts of the world.  If you live in a hardwater area our problem is worse.  To be honest, I do buy distilled water for my machine due to living in a very bad hardwater area, but as I said it's not cheap.  Here's a link to the one I buy on Amazon http://amazon.co.uk/gp/product/B07BSJ9T8S/ or you can buy a water distiller to make your own which is more cost-effective.
If you don't want to use distilled water, you can continue with cooled boiled tap water, but will just have to clean/disinfect more often.

You're welcome Maxine.  I have to say that although it's more expensive using distilled, I now never get any build-up of minerals/limescale in my humidifier and don't even need to clean it with vinegar.  I just spray the CPAP spray into it once a week for a deeper clean or lemon juice would be fine.  
Maxine Chaplain said:

Thanks so much for the advice. I now have my new one and will try the water/vinegar regime. Yes, we do live in a very hard water area which doesn't help so I'll give the distilled water a go too. Many thanks 

Reply to Discussion

RSS

About

Sleep Apnoea Forum

New to the Sleep Apnoea Forum? 

1. Stop by our Sleep Apnoea Welcome Center to introduce yourself to the SleepGuide community.
2. Start a New Topic of Conversation.
3. Post your photos - of yourself, your old CPAP machine, your new CPAP machine, your pet, something about you!

Interested in advertising, have a problem or need to contact us? Click the Report an Issue page.

 

Latest Activity

Jonathan replied to John's discussion Wellu O2 Ring - is it accurate enough for the medics?
"Hi The SleepCube was a private purchase, as way back then my local sleep clinic assessed patients by filming them overnight, whilst wearing an oximeter, and only issued CPAP machines without humidifiers.  There was no remote monitoring and…"
yesterday
John replied to John's discussion Wellu O2 Ring - is it accurate enough for the medics?
"Yeah I was wondering about email address. I thought probably if they wanted me to mail them they would have given out an address. I can imagine heart data is considered more acute than sleep data, so it would make more sense to have that…"
Friday
Jonathan replied to John's discussion Wellu O2 Ring - is it accurate enough for the medics?
"Hi. I didn't use PatientsKnowBest (ironic name), but I have an email address for my heart department for sending in ECGs.  I was just saying that they may be able to review a PDF when then cannot review a data file from your O2 ring. I am…"
Friday
John replied to John's discussion Wellu O2 Ring - is it accurate enough for the medics?
"Hi Jonathan, did you do that through PatientKnowsBest?"
Friday
Jonathan replied to John's discussion Wellu O2 Ring - is it accurate enough for the medics?
"On an unrelated topic, I've been able to send ECGs by PDF to my heart clinic. On the subject of Resmed and apnoeas, take a look at https://youtu.be/ufOOAfyzZso?si=Tpdl4EEiCQBZR4iD&t=276 Your machine may be under-reporting. Good…"
Friday
John posted a discussion

Wellu O2 Ring - is it accurate enough for the medics?

Moving some furniture my long lost O2 ring continuous oxygen saturation monitor turned up. So I've been wearing it and it tells me I have loads of saturation drops during the night even though my Airsense 10 says I have very few apneas.So I get two…See More
Oct 21
Richard Smith replied to Richard Smith's discussion air bubbles after weight loss
"Hi, Just thought I'd give an update.  So, I had my appointment with the NHS sleep clinic which was much quicker than I anticipated and I've now had the overnight sleep study.  My AHI is now 6, down from over 30, so I'm…"
Oct 15
John replied to Sally Gray's discussion Microplastics risks
"Hi Sally from what I read the airsense doesn't suffer the same foam degredation issues as the infamous Phillips machine.I can conceive it's possible that microplastics may be shed from the flexible main tube.What worries me more about the…"
Oct 7
Jonathan replied to Richard Smith's discussion air bubbles after weight loss
"Hi My sleep clinic discharged me, saying they were happy I was self-managing.  Roll on a decade and the cardiologists taking care of me were very unimpressed and I was re-enrolled.  I expect remote monitoring with current generation Resmed…"
Sep 1
Richard Smith replied to Richard Smith's discussion air bubbles after weight loss
"Hi Jonathan, Thanks again for the info.  My cpap *should* be monitored by the NHS though I haven’t had any contact from them since pre-covid.  I checked out the link you gave to access extra data and I think that’s going to be…"
Aug 31
Jonathan replied to Richard Smith's discussion air bubbles after weight loss
"Hi I have the ResMed Airsense 10 Autoset (APAP).  It's monitored remotely by my NHS sleep clinic and I believe they can make changes to the settings.  I don't know whether they are notified if I make changes, nor whether they…"
Aug 31
Richard Smith replied to Richard Smith's discussion air bubbles after weight loss
"Hi Jonathan, Thanks for the reply.  I'd say that I'm fairly technical.  I have the ResMed Airsense 10 Elite machine.  I've discovered that I can upload data wirelessly from my machine and having lowered the pressure by…"
Aug 30
Jonathan replied to Richard Smith's discussion air bubbles after weight loss
"Hi You don't say how technical you are, or what sort of machine you use.  However https://www.sleephq.com/ has software which allows you to upload data from compatible machines, and analyse your sleep "score", including a…"
Aug 29
Richard Smith posted a discussion

air bubbles after weight loss

Hi,I've been on Mounjaro for about 3 months now, not primarily for weight loss, but I have lost weight around my face and neck.  I've noticed that I am increasingly getting air bubbles in my mouth which of course is disturbing my sleep (and my…See More
Aug 28
Sally Gray posted a discussion

Micro plastics risks

I was reading an article in the I newspaper today written by a journalist who had her blood tested for micro plastics and was shocked by the results.…See More
Aug 3
Alison Mitchell is now a member of Hope2SleepGuide
Jul 2
John posted a discussion

job with the charity

Was wondering if there might be a job for me with Hope2Sleep?(I also just asked this of a group by mistake)See More
Jun 27
Tracey Tilley updated their profile
May 22
Sharon Sullivan posted a discussion

For Sale - Ventura Full Total Face CPAP Mask

I’m selling an Ventura Full Total Face CPAP Mask Large and two spare liners.  I bought it new from the Hope2Sleep shop, but it is not suitable for me.  Only used for about two weeks so I have washed it thoroughly.   Because of this, it is very much…See More
May 17
Tracey Tilley replied to Jim Scullion's discussion UK Attendance Allowance
"I put in a claim for PIP which was denied and now I am over 66 and on pension I tried for AA. Denied again.I have other health conditions ( Diverticular disease and Bile Acid Malabsorbtion ) which I consider hard to live with and they refused all of…"
May 14

© 2025   Created by The SleepGuide Crew.   Powered by

Badges  |  Report an Issue  |  Terms of Service