"Yes, it does the job. I use a Powapacs Atom for portable power "
Sleep Apnoea Forum Bringing Help + Support to the Patient
Just switched to APAP machine - pressure increasing.
Hi All,
First post so it's great to be here.
I've been using CPAP for 10 years. Recently lost 3 stone and have been experiencing a new challenge. I've started swallowing air as I fall asleep which then wakes me up, classic signs of pressure too high. So, i reduce the pressure but then the therapy seems less effective (tired/anxious/stressed next day).
Anyway I had my maintainence check a couple of days ago and I've been issued with a Devilbiss Sleepcube Auto. The range was left at 4 - 18 cm02 which just destroyed my first night so I've adjusted that to a more realistic range (11 - 18).
My undertsanding is that the APAP adjusts during the night from the lower threshold until you stop having AHI events and then increases / decreases the pressure as required.
Here's the strange thing:I start the machine and after 20 minutes of not being able to sleep, and starting to swallow air, I look down and the machine has increased it's pressure to 13cm02 - why would it do that if I'm not asleep and not having any AHI events ?
Anyway it's only been 2x nights but I'm super struggling with the APAP so last night I set it CPAP as even though the therapy isn't as effective I'd had 2 weeks of destroyed sleep so I needed to get something.
Views: 186
Replies to This Discussion
-
Permalink Reply by Sleep2snore on
-
I don't know this machine that well, does it have EPR? If it does turn it on, this will help with air pumping you up.
CPAPs can make mistakes with people when not yet asleep, people hold their breath sometimes when they turn and toss before going to sleep. Sometimes I just hold mine for no reason other than I appear to want to.
You could set the RAMP so as it does not reach full pressure before you fall asleep, this might help a bit, you can start at a higher level than 4 and set maximum delay. If you need 18 you might need more than the 11 you set it for, but there is no way the machine would know that before you fell asleep.
YouTube has a few videos if you don't know how to adjust it, but I think you already know.
-
Permalink Reply by Tef on
-
Hi, and thanks for the reply.
It has exhale relief in the form of SmartFlex and when I used it I got a semi decent night's sleep. So thanks for the tip as it will hopefully help.
I'm gonna try it on CPAP again tonight, using a long ramp time from 11 cmh20 and once I'm stabilised I'll start using APAP again with a more realistic range I think.
The thing about just not breathing for a little while is so true lol, thought it was just me ;-)
-
Permalink Reply by Kath Hope on
-
You need to be careful messing around with the pressures too much Tim, because as you've proved, when you turned them down you felt worse, which is probably because you weren't be treated well for your sleep apnoea.
It's common for the machines to raise in pressure when people are awake if they are shallow breathers, or if they're concentrating and holding their breath, which many people do without realising it.
The APAP will tell you what your AHI was and give you a clue as to how the pressure's treating you.
Also, bear in mind that APAP doesn't suit everyone. Apart from the fact it can disturb sleep when the pressure adjust, when people have UARS (Upper Airways Resistance Syndrome) as well, then the pressures can run away with themselves. I'd be inclined to ring the sleep clinic who issued you with the machine for professional help.
About
Sleep Apnoea Forum
New to the Sleep Apnoea Forum?
1. Stop by our Sleep Apnoea Welcome Center to introduce yourself to the SleepGuide community.
2. Start a New Topic of Conversation.
3. Post your photos - of yourself, your old CPAP machine, your new CPAP machine, your pet, something about you!
Interested in advertising, have a problem or need to contact us? Click the Report an Issue page.
Latest Activity
"Hi Nick thanks. Does it do the job and could you camp with it?"
CPAP Total Face Mask
I was curious whether anyone has used the CPAP Total Face Masks and could pass on their observations? I've been using an Airfit F20 for years which is fine apart from the permanent red mark on the bridge of my nose, and have recently tried the…See More
"I've been using the Resmed Airmini for about 5 years when travelling - overall lightweight and small and can be controlled by an App, but it does produce a loud whistling/wind sound for me which hasn't been reduced by an inline filter or…"
"Hi
It sounds like you need to have more conversations with your sleep clinic. There's little point in having a high pressure if it means you cannot tolerate the machine. There's an interesting video here…"
Pressure waking me up. Belching and wind
HiI'm using the prisma smart max machine. Initially I was just on a nasal mask, this changed as I was sleeping with my mouth open. I then went to face and nose mask and complained of bad wind and belching. Sometimes the pressure in the night was…See More
"Just to tidy this up, I finally had an in-person review by my sleep clinic yesterday, who agreed the ResMed AirSense 10 was "wheezy" and replaced the machine."
"thank you jonathan,i did get the it pack so tried the small and still struggled but i was sat up in bed so will try lying down great suggestion "
"Hi
My first thought is "don't panic"! We're all a bit different, and there are many things that can be tweaked. I took to CPAP therapy like a duck to water, but I've had friends who say they can't cope, but…"
1st time and I’ve failed the mask leak test
Hi everyone, today I received my rental kit - prisma smart max, plus a Philips dreamwear mask which I’ve been wearing unconnected to try and get used to it. I just did a mask fit test using a medium mask and got a constant red/orange leak warning…See More
Are every small CPAP machines any good?
Travel sized, micro - any good?See More
"Ha well it lasted a couple of days but started howling again. But it's a step in the right direction, just needs a bit more work."
"Nope, I just accept that some people's throats tend to close when they sleep, due to a loss of muscle tone during deeper sleep. Back when I was diagnosed, the sleep lab just filmed you whilst you slept, stuck an O2 meter on your finger,…"
"Did anyone tell you exactly what the anatomical issue is, Jonathan?"
"Can't say I know about this."
"So I tore some fabric from one of the filters and glued it over the holes - and it worked!It was dead quiet, and the air was still flowing freely.It was quiet all night then after a few hours a bit of whistling until I gave it a wipe.Vast…"
© 2024 Created by The SleepGuide Crew.
Powered by
