Hope2SleepGuide

Sleep Apnoea Forum Bringing Help + Support to the Patient

Hi.
I'm finding the Airsense 10 the hospital gave me, the humidifier chamber runs dry. It's not even on max settings, which I'm guessing would empty it a lot quicker. Seems like a big design oversight to me. Does anyone else have this trouble? The water supply in the Sleepcube they gave me before would last all night easily, but they don't use them any more.

Views: 227

Reply to This

Replies to This Discussion

I previously had a DeVilbiss Sleepcube and the dehumidifier did sometimes run dry.  On the other hand I now have an AirSense 10 and it never runs dry, and I've had the humidity turned up high.

Wow it's the other way round for me.
I found with the Sleepcube I'd often have a good bit of water still there in the morning.
Today I woke up with a dry tank on the Resmed again, feels horrible, and it's only on 6 humidity and 11 pressure.
I asked the hospital, they don't have Sleepcubes any more.

I had a look round for people modifying the tanks and some create DIY solutions, and I think someone 3D printed a bigger one.

Anyway I emailed Resmed and said nice kit, but can you make a bigger tank?

Do you fill it over the max level line?

I did replace the tank in my SleepCube, and had to regularly take the silicone sealing gasket out and give it a goof clean, but not infrequently found it standing in a pool of water in the morning.  The machine sat on a tray because of this.

The ResMed tank is a lot smaller (and doesn't yet leak!) and I have the machine humidity set around 5, but I've found if it's any higher I get rain-out in the mask.  May be the ResMed adjusts for the room temperature - at the moment the bedroom is around 17C at night time (and I still wake up overheated under a 4.5 tog duvet - that's just me).  There's always water left in the tank in the morning.

Did you try a sleeve for the tube, Jonathan? For rain out? I got one off ebay for a few quid and I think it helps. It's a fleece sleeve  you zip over the main tube.

Yes, I bought some fleecy material and made my own "snuggle hose" 10+ years ago. 

Oh cool. Did you do any other DIY mods?

I made a clamped strap to go on the headboard and lift the tube. Just a spare c-clamp with a bit of nylon strap and a clip but works well.

Neat clip for your hose!

I used to use the Respironics Comfort Curve one of the best masks ever, now discontinued of course.  With its stethoscope-style tubing, I had to make my own fleecy cover.

John said:

Oh cool. Did you do any other DIY mods?

I made a clamped strap to go on the headboard and lift the tube. Just a spare c-clamp with a bit of nylon strap and a clip but works well.

Come to think of it you could likely double up a hose cozy, one over another.

This is a piece of N95 face mask I used for high grade filtration. I just put it where the filter usually goes.
This is around 6 months dirt I would say, thereabouts. I used two for a double layer.

How did you fasten it?

I suppose you could do it with tape or elastic bands. Cut up an old fleece jacket, wrap it round the tube, strap it up, bit of velcro. That sort of thing. I hadn't really thought of that.

Jonathan said:

Yes, I bought some fleecy material and made my own "snuggle hose" 10+ years ago. 

Dab hand with a sewing machine :)  The "stethoscope" pipes were detachable with a bit of careful persuasion.

John said:

How did you fasten it?

I suppose you could do it with tape or elastic bands. Cut up an old fleece jacket, wrap it round the tube, strap it up, bit of velcro. That sort of thing. I hadn't really thought of that.

Jonathan said:

Yes, I bought some fleecy material and made my own "snuggle hose" 10+ years ago. 

Reply to Discussion

RSS

Sleep Apnoea Forum

New to the Sleep Apnoea Forum? 

1. Stop by our Sleep Apnoea Welcome Center to introduce yourself to the SleepGuide community.
2. Start a New Topic of Conversation.
3. Post your photos - of yourself, your old CPAP machine, your new CPAP machine, your pet, something about you!

Interested in advertising, have a problem or need to contact us? Click the Report an Issue page.

 

Latest Activity

John replied to John's discussion Has anyone been told root cause of their OSA?
"Did anyone tell you exactly what the anatomical issue is, Jonathan?"
8 hours ago
John replied to Jonathan's discussion ResMed AirSense 10 getting noisy
"Can't say I know about this."
yesterday
John replied to John's discussion evil mask noise
"So I tore some fabric from one of the filters and glued it over the holes - and it worked!It was dead quiet, and the air was still flowing freely.It was quiet all night then after a few hours a bit of whistling until I gave it a wipe.Vast…"
Saturday
John replied to John's discussion evil mask noise
"Hi Jonathan, well see my nose is blocked a lot, so I mouth breath which really sucks a lot more moisture and makes my mouth dry. So I put humidity on maximum, which makes for condensation at the mask end, which becomes a demonic reed instrument.Now…"
Thursday
Jonathan posted a discussion

ResMed AirSense 10 getting noisy

HelloI have an NHS issued ResMed AirSense 10 with heated humidifier.  In the last couple of weeks, it's developed an annoying noise, when I inhale. It bothers me a little and my partner a lot! I sometimes get problems if the water container in the…See More
Wednesday
Jonathan replied to John's discussion evil mask noise
"Hi My first question is why is condensation forming?  I very occasionally get some condensation, may be once a month, but I can quickly run a finger around the inside of the mask, and wipe it away.  I use a nasal mask, with the humidifier…"
Wednesday
John replied to John's discussion What's a good Apnea forum?
"11K+? Ok that's probably where I should look then :-)"
Wednesday
Kath Hope replied to John's discussion What's a good Apnea forum?
"Hi John. Thanks for the compliment as I do my best popping on here, but it's difficult due to us now supporting 25k+ patients at the charity. To be honest, the forum is quiet because most people seem to prefer Facebook and forums aren't as…"
Wednesday
John posted discussions
Wednesday
Jonathan replied to John's discussion Has anyone been told root cause of their OSA?
"There's some information here, but generally it's very common and likely due to our anatomy."
Oct 12
John replied to John's discussion A tale of two nasal dilators
"I've found they get lost easy. The Airmax one is £10, lasted a couple of weeks before disappearing.The white ones are quite cheap, work out about 50p each off Ebay.I was wanting to experiment with making a mould and crafting my own…"
Oct 7
John posted a discussion

Has anyone been told root cause of their OSA?

Hi, I'm having trouble getting diagnoses for anything from the NHS recently. A pressing one being what exactly causes my apnea.Is it like this for everyone or do some people get told what is the specific physical problem and root cause?See More
Oct 7
John replied to John's discussion Oropharyngeal exercises
"Hi Kath yes I was pretty disappointed when the consultant told me this - as I had some papers sitting next to me saying studies showed an effect - and that's evidence.Looking at the exite thing it says, "has been clinically proven to…"
Oct 7
grumpycamel left a comment for Sarah Kirton
"Hi Sarah, Im interested in the Philips Dreamstation 2 Auto CPAP that you have for sale and would be grateful if you could contact me on 07909996432 at your convenience to discuss. Im not available durings parts of the day so if there is no answer…"
Oct 2
Jonathan replied to Jim Scullion's discussion UK Attendance Allowance
"My sleep apnoea just requires me to pop a mask on before I go to bed.  But your circumstances may be different."
Sep 16
Jim Scullion posted a discussion

UK Attendance Allowance

Does anyone know if Obstructive Sleep Apnoea can be the basis for a claim for attendance allowance in the UK?See More
Sep 14
Anthony N is now a member of Hope2SleepGuide
Sep 11
Amanda Lucas is now a member of Hope2SleepGuide
Sep 10
Profile IconHeidi Castro Ledwych and marion Edwards joined Hope2SleepGuide
Sep 9
Profile IconNiki tillson, Canyon and T-Bone joined Hope2SleepGuide
Sep 5

© 2024   Created by The SleepGuide Crew.   Powered by

Badges  |  Report an Issue  |  Terms of Service