Hope2SleepGuide

Sleep Apnoea Forum Bringing Help + Support to the Patient

Squeaking Around the Elbow Assembly of the Mirage Quattro

I am a newbie (been on CPAP for almost 2 weeks).  Last night was one of the 2 worst nights that I have had yet.  Last night it was cool in southeast Texas  I went to bed without the heater on ( before CPAP I would sleep without the heater on in cool weather but I also would always sleep with my head under the covers--and I have not adjusted well to not been able to do this).  I had difficulty falling to sleep because I was sensitive to the air that was surrounding my face.  The air felt really cool and did not feel like a leak.  I think I was feeling air from the exhalation port.  I sometimes have leaks around my eyes but that didn't seem like it was the problem either.  I had the Amara on and decided to change to my original mask the Mirage Quattro but I still felt the same.  I decided to see how I would feel if I increased the humidifier setting from 3 to 4 and I turned on the central heating but I did not experience much improvement.  I continued struggling and finally the Quattro started squeaking in the elbow assembly area when I was turned and changed sleeping positions.  This noise made it impossible for me to get to sleep.  So after about 4 hours I turned the machine off.  I do not know what is going on with that entire elbow/valve area.  A couple of days ago I tried disassembling the entire mask so I could thoroughly clean it.  But I could not get that entire portion (elbow assembly etc) off.  So I know I did not reassemble it incorrectly.  Also I had slept at least 1 night with the mask since cleaning without a problem.  Any suggestions would be greatly appreciated.

Views: 242

Reply to This

Replies to This Discussion

It's a difficult one to answer Wanda with not living in your kind of climate. It sounds like the sudden drop in temperature was the biggest problem so perhaps a few days of having the central heating on to thoroughly warm the bedroom will help.  The only time I notice the cool air is when the temperatures really plummet - in the same way I suppose when our leather sofa is always comfy to sit on, but when the weather's freezing, the cold is noticeable when first sitting on it.  Have you got a hose cover on your tube?  Like this one (but you should be able to get one out in Texas) CPAP HOSE COVER.

Sounds like you may have dislodged the elbow when you tried to get it off for cleaning.  I'm not sure if you have the original Quattro or Quattro FX, but if you search for a video then you should find one for disassembling the mask.

Kath,

Thanks for the response.  Yes I purchased a hose cover shortly after starting to use the CPAP.  I am trying to purchase any products that will enhance success with my CPAP therapy.  I have the Mirage Quattro.  Last night I changed the humidifer to 5 which helped so much more.  I slept well for over 8 hours (I am still on holiday leave) with only slight leaking of air in my eyes during the early morning hours.

 

I called the DME this morning and they shared that they thought the mask was defective and that if it was squeaking it would continue.  So I have an appointment this afternoon to switch the mask out.

Good to hear you had a better night with the humidification raised, and also good to hear the DME is acting quickly to change the mask.  You're getting to realise that we bob along nicely until a new problem occurs - it's a learning process, and even when we think we've cracked it, a new challenge comes along You are still having a great start Wanda.

Kath,  thanks I feel like I have learned a lot in the past 2 weeks.  The DME company left the mask at the receptionist desk since they were all booked today.  I signed on the dotted line and was off with my new Mirage Quattro.

Great to hear Wanda, so hope everything's perfect for tonight

Reply to Discussion

RSS

About

Sleep Apnoea Forum

New to the Sleep Apnoea Forum? 

1. Stop by our Sleep Apnoea Welcome Center to introduce yourself to the SleepGuide community.
2. Start a New Topic of Conversation.
3. Post your photos - of yourself, your old CPAP machine, your new CPAP machine, your pet, something about you!

Interested in advertising, have a problem or need to contact us? Click the Report an Issue page.

 

Latest Activity

Jonathan replied to John's discussion Wellu O2 Ring - is it accurate enough for the medics?
"Hi The SleepCube was a private purchase, as way back then my local sleep clinic assessed patients by filming them overnight, whilst wearing an oximeter, and only issued CPAP machines without humidifiers.  There was no remote monitoring and…"
Oct 25
John replied to John's discussion Wellu O2 Ring - is it accurate enough for the medics?
"Yeah I was wondering about email address. I thought probably if they wanted me to mail them they would have given out an address. I can imagine heart data is considered more acute than sleep data, so it would make more sense to have that…"
Oct 24
Jonathan replied to John's discussion Wellu O2 Ring - is it accurate enough for the medics?
"Hi. I didn't use PatientsKnowBest (ironic name), but I have an email address for my heart department for sending in ECGs.  I was just saying that they may be able to review a PDF when then cannot review a data file from your O2 ring. I am…"
Oct 24
John replied to John's discussion Wellu O2 Ring - is it accurate enough for the medics?
"Hi Jonathan, did you do that through PatientKnowsBest?"
Oct 24
Jonathan replied to John's discussion Wellu O2 Ring - is it accurate enough for the medics?
"On an unrelated topic, I've been able to send ECGs by PDF to my heart clinic. On the subject of Resmed and apnoeas, take a look at https://youtu.be/ufOOAfyzZso?si=Tpdl4EEiCQBZR4iD&t=276 Your machine may be under-reporting. Good…"
Oct 24
John posted a discussion

Wellu O2 Ring - is it accurate enough for the medics?

Moving some furniture my long lost O2 ring continuous oxygen saturation monitor turned up. So I've been wearing it and it tells me I have loads of saturation drops during the night even though my Airsense 10 says I have very few apneas.So I get two…See More
Oct 21
Richard Smith replied to Richard Smith's discussion air bubbles after weight loss
"Hi, Just thought I'd give an update.  So, I had my appointment with the NHS sleep clinic which was much quicker than I anticipated and I've now had the overnight sleep study.  My AHI is now 6, down from over 30, so I'm…"
Oct 15
John replied to Sally Gray's discussion Microplastics risks
"Hi Sally from what I read the airsense doesn't suffer the same foam degredation issues as the infamous Phillips machine.I can conceive it's possible that microplastics may be shed from the flexible main tube.What worries me more about the…"
Oct 7
Jonathan replied to Richard Smith's discussion air bubbles after weight loss
"Hi My sleep clinic discharged me, saying they were happy I was self-managing.  Roll on a decade and the cardiologists taking care of me were very unimpressed and I was re-enrolled.  I expect remote monitoring with current generation Resmed…"
Sep 1
Richard Smith replied to Richard Smith's discussion air bubbles after weight loss
"Hi Jonathan, Thanks again for the info.  My cpap *should* be monitored by the NHS though I haven’t had any contact from them since pre-covid.  I checked out the link you gave to access extra data and I think that’s going to be…"
Aug 31
Jonathan replied to Richard Smith's discussion air bubbles after weight loss
"Hi I have the ResMed Airsense 10 Autoset (APAP).  It's monitored remotely by my NHS sleep clinic and I believe they can make changes to the settings.  I don't know whether they are notified if I make changes, nor whether they…"
Aug 31
Richard Smith replied to Richard Smith's discussion air bubbles after weight loss
"Hi Jonathan, Thanks for the reply.  I'd say that I'm fairly technical.  I have the ResMed Airsense 10 Elite machine.  I've discovered that I can upload data wirelessly from my machine and having lowered the pressure by…"
Aug 30
Jonathan replied to Richard Smith's discussion air bubbles after weight loss
"Hi You don't say how technical you are, or what sort of machine you use.  However https://www.sleephq.com/ has software which allows you to upload data from compatible machines, and analyse your sleep "score", including a…"
Aug 29
Richard Smith posted a discussion

air bubbles after weight loss

Hi,I've been on Mounjaro for about 3 months now, not primarily for weight loss, but I have lost weight around my face and neck.  I've noticed that I am increasingly getting air bubbles in my mouth which of course is disturbing my sleep (and my…See More
Aug 28
Sally Gray posted a discussion

Micro plastics risks

I was reading an article in the I newspaper today written by a journalist who had her blood tested for micro plastics and was shocked by the results.…See More
Aug 3
Alison Mitchell is now a member of Hope2SleepGuide
Jul 2
John posted a discussion

job with the charity

Was wondering if there might be a job for me with Hope2Sleep?(I also just asked this of a group by mistake)See More
Jun 27
Tracey Tilley updated their profile
May 22
Sharon Sullivan posted a discussion

For Sale - Ventura Full Total Face CPAP Mask

I’m selling an Ventura Full Total Face CPAP Mask Large and two spare liners.  I bought it new from the Hope2Sleep shop, but it is not suitable for me.  Only used for about two weeks so I have washed it thoroughly.   Because of this, it is very much…See More
May 17
Tracey Tilley replied to Jim Scullion's discussion UK Attendance Allowance
"I put in a claim for PIP which was denied and now I am over 66 and on pension I tried for AA. Denied again.I have other health conditions ( Diverticular disease and Bile Acid Malabsorbtion ) which I consider hard to live with and they refused all of…"
May 14

© 2025   Created by The SleepGuide Crew.   Powered by

Badges  |  Report an Issue  |  Terms of Service