Hope2SleepGuide

Sleep Apnoea Forum Bringing Help + Support to the Patient

Squeaking Around the Elbow Assembly of the Mirage Quattro

I am a newbie (been on CPAP for almost 2 weeks).  Last night was one of the 2 worst nights that I have had yet.  Last night it was cool in southeast Texas  I went to bed without the heater on ( before CPAP I would sleep without the heater on in cool weather but I also would always sleep with my head under the covers--and I have not adjusted well to not been able to do this).  I had difficulty falling to sleep because I was sensitive to the air that was surrounding my face.  The air felt really cool and did not feel like a leak.  I think I was feeling air from the exhalation port.  I sometimes have leaks around my eyes but that didn't seem like it was the problem either.  I had the Amara on and decided to change to my original mask the Mirage Quattro but I still felt the same.  I decided to see how I would feel if I increased the humidifier setting from 3 to 4 and I turned on the central heating but I did not experience much improvement.  I continued struggling and finally the Quattro started squeaking in the elbow assembly area when I was turned and changed sleeping positions.  This noise made it impossible for me to get to sleep.  So after about 4 hours I turned the machine off.  I do not know what is going on with that entire elbow/valve area.  A couple of days ago I tried disassembling the entire mask so I could thoroughly clean it.  But I could not get that entire portion (elbow assembly etc) off.  So I know I did not reassemble it incorrectly.  Also I had slept at least 1 night with the mask since cleaning without a problem.  Any suggestions would be greatly appreciated.

Views: 227

Reply to This

Replies to This Discussion

It's a difficult one to answer Wanda with not living in your kind of climate. It sounds like the sudden drop in temperature was the biggest problem so perhaps a few days of having the central heating on to thoroughly warm the bedroom will help.  The only time I notice the cool air is when the temperatures really plummet - in the same way I suppose when our leather sofa is always comfy to sit on, but when the weather's freezing, the cold is noticeable when first sitting on it.  Have you got a hose cover on your tube?  Like this one (but you should be able to get one out in Texas) CPAP HOSE COVER.

Sounds like you may have dislodged the elbow when you tried to get it off for cleaning.  I'm not sure if you have the original Quattro or Quattro FX, but if you search for a video then you should find one for disassembling the mask.

Kath,

Thanks for the response.  Yes I purchased a hose cover shortly after starting to use the CPAP.  I am trying to purchase any products that will enhance success with my CPAP therapy.  I have the Mirage Quattro.  Last night I changed the humidifer to 5 which helped so much more.  I slept well for over 8 hours (I am still on holiday leave) with only slight leaking of air in my eyes during the early morning hours.

 

I called the DME this morning and they shared that they thought the mask was defective and that if it was squeaking it would continue.  So I have an appointment this afternoon to switch the mask out.

Good to hear you had a better night with the humidification raised, and also good to hear the DME is acting quickly to change the mask.  You're getting to realise that we bob along nicely until a new problem occurs - it's a learning process, and even when we think we've cracked it, a new challenge comes along You are still having a great start Wanda.

Kath,  thanks I feel like I have learned a lot in the past 2 weeks.  The DME company left the mask at the receptionist desk since they were all booked today.  I signed on the dotted line and was off with my new Mirage Quattro.

Great to hear Wanda, so hope everything's perfect for tonight

Reply to Discussion

RSS

Sleep Apnoea Forum

New to the Sleep Apnoea Forum? 

1. Stop by our Sleep Apnoea Welcome Center to introduce yourself to the SleepGuide community.
2. Start a New Topic of Conversation.
3. Post your photos - of yourself, your old CPAP machine, your new CPAP machine, your pet, something about you!

Interested in advertising, have a problem or need to contact us? Click the Report an Issue page.

 

Latest Activity

Nick Daniel replied to John's discussion Are every small CPAP machines any good?
"Yes, it does the job. I use a Powapacs Atom for portable power "
Dec 18
John replied to John's discussion Are every small CPAP machines any good?
"Hi Nick thanks. Does it do the job and could you camp with it?"
Dec 18
Nick Daniel posted a discussion

CPAP Total Face Mask

I was curious whether anyone has used the CPAP Total Face Masks and could pass on their observations? I've been using an Airfit F20 for years which is fine apart from the permanent red mark on the bridge of my nose, and have recently tried the…See More
Dec 17
Nick Daniel replied to John's discussion Are every small CPAP machines any good?
"I've been using the Resmed Airmini for about 5 years when travelling - overall lightweight and small and can be controlled by an App, but it does produce a loud whistling/wind sound for me which hasn't been reduced by an inline filter or…"
Dec 17
Greg Lloyd is now a member of Hope2SleepGuide
Dec 6
Jonathan replied to David Hudson's discussion Pressure waking me up. Belching and wind
"Hi It sounds like you need to have more conversations with your sleep clinic.  There's little point in having a high pressure if it means you cannot tolerate the machine.  There's an interesting video here…"
Dec 1
David Hudson posted a discussion

Pressure waking me up. Belching and wind

HiI'm using the prisma smart max machine. Initially I was just on a nasal mask, this changed as I was sleeping with my mouth open. I then went to face and nose mask and complained of bad wind and belching. Sometimes the pressure in the night was…See More
Nov 28
Jonathan replied to Jonathan's discussion ResMed AirSense 10 getting noisy
"Just to tidy this up, I finally had an in-person review by my sleep clinic yesterday, who agreed the ResMed AirSense 10 was "wheezy" and replaced the machine."
Nov 9
Collette rose replied to Collette rose's discussion 1st time and I’ve failed the mask leak test
"thank you jonathan,i did get the it pack so tried the small and still struggled but i was sat up in bed so will try lying down great suggestion "
Nov 3
Jonathan replied to Collette rose's discussion 1st time and I’ve failed the mask leak test
"Hi My first thought is "don't panic"!  We're all a bit different, and there are many things that can be tweaked.  I took to CPAP therapy like a duck to water, but I've had friends who say they can't cope, but…"
Nov 2
Collette rose posted a discussion

1st time and I’ve failed the mask leak test

Hi everyone, today I received my rental kit - prisma smart max, plus a Philips dreamwear mask which I’ve been wearing unconnected to try and get used to it. I just did a mask fit test using a medium mask and got a constant red/orange leak warning…See More
Nov 2
Collette rose is now a member of Hope2SleepGuide
Oct 31
John posted a discussion
Oct 30
Profile IconBill Wright, Nicole Watson, TJ Bennett and 2 more joined Hope2SleepGuide
Oct 29
John replied to John's discussion evil mask noise
"Ha well it lasted a couple of days but started howling again. But it's a step in the right direction, just needs a bit more work."
Oct 24
Jonathan replied to John's discussion Has anyone been told root cause of their OSA?
"Nope, I just accept that some people's throats tend to close when they sleep, due to a loss of muscle tone during deeper sleep.  Back when I was diagnosed, the sleep lab just filmed you whilst you slept, stuck an O2 meter on your finger,…"
Oct 24
Jonathan replied to John's discussion evil mask noise
"Good to know you found a solution!"
Oct 24
John replied to John's discussion Has anyone been told root cause of their OSA?
"Did anyone tell you exactly what the anatomical issue is, Jonathan?"
Oct 21
John replied to Jonathan's discussion ResMed AirSense 10 getting noisy
"Can't say I know about this."
Oct 20
John replied to John's discussion evil mask noise
"So I tore some fabric from one of the filters and glued it over the holes - and it worked!It was dead quiet, and the air was still flowing freely.It was quiet all night then after a few hours a bit of whistling until I gave it a wipe.Vast…"
Oct 19

© 2024   Created by The SleepGuide Crew.   Powered by

Badges  |  Report an Issue  |  Terms of Service