Hope2SleepGuide

Sleep Apnoea Forum Bringing Help + Support to the Patient

Hi

Longtime readers of this forum may remember I've lamented the discontinuation of the Respironics Comfort Curve mask.  It was like no other, with a nasal pillow without prongs that sat under the nose.  The hose was like a stethoscope.  When I found they'd been discontinued I ordered a couple from the US, and have held them together with sticky tape for years!

I've tried a couple of nasal pillow masks since, but don't get on with the prongs.  The best I've found is the cloth Circadiance Sleepweaver (a brilliant spare to pack in your luggage, as it disappears to nothing) and by its nature, you don't get rainout.  But I've always gone back to the Comfort Curve.

When the Respironics Dreamwear came out, I took a chance and ordered one from the US last October.  Nine months on, here's a review.  It's really quite good.  Like the CC, it sits under the nose, without prongs, so it doesn't irritate the nostrils.  And it comes with a selection of pillow sizes, to get a good fit.  I don't like the fact that the hose comes out the top of your head, as I sleep on my side (used to sleep on my tummy before the CPAP) and when you roll from side to side, you drag the hose around.  I was concerned that the supply tubes down either side of my face would be crushed flat as I lie on them, but with one not crushed there's adequate air supply.  It's also free from rainout, unlike the CC.

All in all, I think the Dreamwear is good, and I'm hoping that my NHS clinic (who supply Respironics) will offer me a replacement one next time I visit.

In the meantime, I'm keeping the old Comfort Curves in the bottom drawer.  We've spent some good times together :)

Jonathan.

Views: 286

Reply to This

Replies to This Discussion

Only just seen your post Jonathan. Glad you like the DreamWear - it's proving a real hit here in the UK. You were lucky to get one cheaper from the USA as they're not supposed to ship Respironics products over here, so you'd best not name the company lol.

I wish I could use the DreamWear but need to mouth-breathe.  However, when I trialled it I loved the way the hose is placed at the top of the head.  Do you use a hose lift, as I found it worked great with the fact the hose lift angles the tube above you, and had no drag of the hose when turning from side to side (I too sleep on my side).

It too was amazed by the fact that even when you lay on the frame tube on one side, adequate air comes through the other side.

For me, being a mouth breather, I'm loving the Amara View.  However, like you with your favourite old mask, I still love my FitLife that rescued me several years ago when I was struggling to find a mask for me :)

Hi Kath

I bought the DreamWear before it was available in the UK.  I know that Respironics (and ResMed?) don't allow their products to be shipped outside the USA.  However, I used Shipito.com who provide a US address and then onward ship to the UK.  This worked REALLY well, as I was able to complete the customs declaration (medical equipment - personal use) and was therefore not charged import duty or tax.  When I purchased previously from another US supplier (CPAP.com) they would put a medical declaration inside the shipping documents, but not on the customs label.  As a result, you end up paying a handling charge for customs, and the import duties and taxes.  Even though you can claim back the taxes from HM Revenue & Customs (takes months!) you don't get the handling charges back.

The hose thing doesn't really bother me.  With me and my partner both on CPAP, the bedroom has some strange S&M feel to it already.  I don't want to add hose lifts and add "hospital" too :)

I used to be a mouth-breather.  After a few years of CPAP, I am now a nose breather (the test being that I can talk when wearing the mask!).  It has made visits to the dentist much easer, as I no longer feel like I'm drowning when the dentist is in full flight.

Jonathan.

Kath Hope said:

Only just seen your post Jonathan. Glad you like the DreamWear - it's proving a real hit here in the UK. You were lucky to get one cheaper from the USA as they're not supposed to ship Respironics products over here, so you'd best not name the company lol.

I wish I could use the DreamWear but need to mouth-breathe.  However, when I trialled it I loved the way the hose is placed at the top of the head.  Do you use a hose lift, as I found it worked great with the fact the hose lift angles the tube above you, and had no drag of the hose when turning from side to side (I too sleep on my side).

It too was amazed by the fact that even when you lay on the frame tube on one side, adequate air comes through the other side.

For me, being a mouth breather, I'm loving the Amara View.  However, like you with your favourite old mask, I still love my FitLife that rescued me several years ago when I was struggling to find a mask for me :)

Reply to Discussion

RSS

Sleep Apnoea Forum

New to the Sleep Apnoea Forum? 

1. Stop by our Sleep Apnoea Welcome Center to introduce yourself to the SleepGuide community.
2. Start a New Topic of Conversation.
3. Post your photos - of yourself, your old CPAP machine, your new CPAP machine, your pet, something about you!

Interested in advertising, have a problem or need to contact us? Click the Report an Issue page.

 

Latest Activity

Nick Daniel replied to John's discussion Are every small CPAP machines any good?
"Yes, it does the job. I use a Powapacs Atom for portable power "
Wednesday
John replied to John's discussion Are every small CPAP machines any good?
"Hi Nick thanks. Does it do the job and could you camp with it?"
Wednesday
Nick Daniel posted a discussion

CPAP Total Face Mask

I was curious whether anyone has used the CPAP Total Face Masks and could pass on their observations? I've been using an Airfit F20 for years which is fine apart from the permanent red mark on the bridge of my nose, and have recently tried the…See More
Tuesday
Nick Daniel replied to John's discussion Are every small CPAP machines any good?
"I've been using the Resmed Airmini for about 5 years when travelling - overall lightweight and small and can be controlled by an App, but it does produce a loud whistling/wind sound for me which hasn't been reduced by an inline filter or…"
Tuesday
Greg Lloyd is now a member of Hope2SleepGuide
Dec 6
Jonathan replied to David Hudson's discussion Pressure waking me up. Belching and wind
"Hi It sounds like you need to have more conversations with your sleep clinic.  There's little point in having a high pressure if it means you cannot tolerate the machine.  There's an interesting video here…"
Dec 1
David Hudson posted a discussion

Pressure waking me up. Belching and wind

HiI'm using the prisma smart max machine. Initially I was just on a nasal mask, this changed as I was sleeping with my mouth open. I then went to face and nose mask and complained of bad wind and belching. Sometimes the pressure in the night was…See More
Nov 28
Jonathan replied to Jonathan's discussion ResMed AirSense 10 getting noisy
"Just to tidy this up, I finally had an in-person review by my sleep clinic yesterday, who agreed the ResMed AirSense 10 was "wheezy" and replaced the machine."
Nov 9
Collette rose replied to Collette rose's discussion 1st time and I’ve failed the mask leak test
"thank you jonathan,i did get the it pack so tried the small and still struggled but i was sat up in bed so will try lying down great suggestion "
Nov 3
Jonathan replied to Collette rose's discussion 1st time and I’ve failed the mask leak test
"Hi My first thought is "don't panic"!  We're all a bit different, and there are many things that can be tweaked.  I took to CPAP therapy like a duck to water, but I've had friends who say they can't cope, but…"
Nov 2
Collette rose posted a discussion

1st time and I’ve failed the mask leak test

Hi everyone, today I received my rental kit - prisma smart max, plus a Philips dreamwear mask which I’ve been wearing unconnected to try and get used to it. I just did a mask fit test using a medium mask and got a constant red/orange leak warning…See More
Nov 2
Collette rose is now a member of Hope2SleepGuide
Oct 31
John posted a discussion
Oct 30
Profile IconBill Wright, Nicole Watson, TJ Bennett and 2 more joined Hope2SleepGuide
Oct 29
John replied to John's discussion evil mask noise
"Ha well it lasted a couple of days but started howling again. But it's a step in the right direction, just needs a bit more work."
Oct 24
Jonathan replied to John's discussion Has anyone been told root cause of their OSA?
"Nope, I just accept that some people's throats tend to close when they sleep, due to a loss of muscle tone during deeper sleep.  Back when I was diagnosed, the sleep lab just filmed you whilst you slept, stuck an O2 meter on your finger,…"
Oct 24
Jonathan replied to John's discussion evil mask noise
"Good to know you found a solution!"
Oct 24
John replied to John's discussion Has anyone been told root cause of their OSA?
"Did anyone tell you exactly what the anatomical issue is, Jonathan?"
Oct 21
John replied to Jonathan's discussion ResMed AirSense 10 getting noisy
"Can't say I know about this."
Oct 20
John replied to John's discussion evil mask noise
"So I tore some fabric from one of the filters and glued it over the holes - and it worked!It was dead quiet, and the air was still flowing freely.It was quiet all night then after a few hours a bit of whistling until I gave it a wipe.Vast…"
Oct 19

© 2024   Created by The SleepGuide Crew.   Powered by

Badges  |  Report an Issue  |  Terms of Service