Hope2SleepGuide

Sleep Apnoea Forum Bringing Help + Support to the Patient

More and more of us are buying pulse oximeters, despite the fact that the majority of the sleep clinics in the UK seem to want to keep their patients in blissful ignorance of their actual sleep patterns.

However those of us who want to learn more about their sleep patterns face the problem that we are not trained in how to interpret the results given by these oximeters.   My understanding from research data is that the results from pulse oximeters correlate very closely with full polysomnography.  If that is right, oximeter users should be able to use their results to indicate accurately whether the pressure they are using is properly controlling their OSA.

 

To start this discussion I would like to pose the following questions, which are based on my own oximeter (CMS50F).    Obviously there may be some other machines which give more, or better, information.  If so, details here would greatly assist other users and potential users.

 

1. What is Basal SpO2(%) and is it significant?

 

2. My oximeter is pre-set with a "Desaturation Criteria Level" of 88%. What is the significance of this figure, and should I alter it up or down?

 

3.How low should the "Average low Sp02 %" be, before it is considered abnormal?

 

4. Is the "Average low Sp02 % < 88%" more, or less, important than the overall average?

 

5. My oximeter results show %Sp02 levels, and number of events, in bands of 5 i.e. 99-95, 94 - 90 and so on , with the number of events in each band.   Should we be aiming not to go below 90 at all, or is the threshold level lower?

 

6. Is the time in each band significant, and if so what should we look for to show good OSA control?

 

7. Which overnight pulse levels are considered abnormal?

 

8. Can the oximeter results be converted into AHIs and if so how?

 

My apologies for setting out formal questions in this way, but I hope that Rock, and other members, will be able to give expert guidance on these points and others, to assist us all. 

 

We would all benefit if we could understand :

 

a)  the default settings to use

 

b)  which readings indicate good OSA control

 

c)  which readings are considered abnormal / undesirable

 

Views: 7339

Reply to This

Replies to This Discussion

This is last night.

Had alcohol and food late.

lot of events still but not as many real bad ones and feel o.k. today.As o.k as can be expected!

I realize it is just opinions and you are not doctors but I would appreciate anyone's opinion on how well my a/pap is adjusted and coping and if there is any suggestions on improving I will try them.

thank you for all your help and support.

This was last night, same night as the oximter report just posted.        Joe

Attachments:

taken same night as the oximeter report last night


Attachments:
add ons from last report as would not except any more on that page.

Hi Joe

 

What is your problem exactly? Last night you had alcohol (we don't know how much) and food late and had a mediocre night. No surprises there, then.

 

It is very difficult to see what is happening from one night's stats - we have to look for trends. Commit two Cardinal Sins of CPAP and your stats are not even representative!

 

If you post averages over four nights - no alcohol and eat earlier - we might be able to see how you are doing. Keep it simple - we need to know Pmax, Pmin, P90%. AHI for each night and averaged. Use the APAP styats as a first guide and then oximeter as a fine tune guide.

 

Early wild guess - your Pmin is too low and/or you use too much Flex.  I suggest you reduce to 1 for the four night test.

 

TF (not a doctor).

Thanks for that T.F

I will do that and then what states should i show.

I put them all on as i do not know what is the important ones and what I can leave out|

 

Thanks joe

Hi Joe

 

If you just post the four numbers I've indictated for four nights, and their averages, as a table, we'll have a good starting point. You get those numbers from your charts, saves posting the charts.

 

TF

Thanks will do.

 

Joe

A night of sleep after alcohol will be a poor reflection of a normal night's sleep.

Yes I thought that so I will not be drinking while I do this test

 

Joe

After 4days now changed min setting  from 7 to 8 max from 14 to 15 and a flex from 3 to 1

 

I will note these and then post them all

 

when you say p min p max do you mean from where I have just altered or does it show somewhere with variations each night?

 

thanks joe

Hi Joe

 

BAsed on your last post, you have just changed Pmin from 7 to 8. Pmin is fixed unless you change it - the machine does not do so automatically. You have changed Pmax from 14 to 15.

 

Now, it is generally considered best to change only one parameter at a time so that you can see the efffect, if any. Change three and who knows what is causing an effect. Were it my machine, I'd leave Flex and Pmax where they are at 1 and 15. I'd do four nights at Pmin 8 and post results. Probably, then I'd do four nights with Pmin 9 and compare - but I'd wait and see the results of Pmin at 8 first.

 

TF

Reply to Discussion

RSS

Sleep Apnoea Forum

New to the Sleep Apnoea Forum? 

1. Stop by our Sleep Apnoea Welcome Center to introduce yourself to the SleepGuide community.
2. Start a New Topic of Conversation.
3. Post your photos - of yourself, your old CPAP machine, your new CPAP machine, your pet, something about you!

Interested in advertising, have a problem or need to contact us? Click the Report an Issue page.

 

Latest Activity

Jonathan replied to Jonathan's discussion ResMed AirSense 10 getting noisy
"Just to tidy this up, I finally had an in-person review by my sleep clinic yesterday, who agreed the ResMed AirSense 10 was "wheezy" and replaced the machine."
Nov 9
Collette rose replied to Collette rose's discussion 1st time and I’ve failed the mask leak test
"thank you jonathan,i did get the it pack so tried the small and still struggled but i was sat up in bed so will try lying down great suggestion "
Nov 3
Jonathan replied to Collette rose's discussion 1st time and I’ve failed the mask leak test
"Hi My first thought is "don't panic"!  We're all a bit different, and there are many things that can be tweaked.  I took to CPAP therapy like a duck to water, but I've had friends who say they can't cope, but…"
Nov 2
Collette rose posted a discussion

1st time and I’ve failed the mask leak test

Hi everyone, today I received my rental kit - prisma smart max, plus a Philips dreamwear mask which I’ve been wearing unconnected to try and get used to it. I just did a mask fit test using a medium mask and got a constant red/orange leak warning…See More
Nov 2
Collette rose is now a member of Hope2SleepGuide
Oct 31
John posted a discussion
Oct 30
Profile IconBill Wright, Nicole Watson, TJ Bennett and 2 more joined Hope2SleepGuide
Oct 29
John replied to John's discussion evil mask noise
"Ha well it lasted a couple of days but started howling again. But it's a step in the right direction, just needs a bit more work."
Oct 24
Jonathan replied to John's discussion Has anyone been told root cause of their OSA?
"Nope, I just accept that some people's throats tend to close when they sleep, due to a loss of muscle tone during deeper sleep.  Back when I was diagnosed, the sleep lab just filmed you whilst you slept, stuck an O2 meter on your finger,…"
Oct 24
Jonathan replied to John's discussion evil mask noise
"Good to know you found a solution!"
Oct 24
John replied to John's discussion Has anyone been told root cause of their OSA?
"Did anyone tell you exactly what the anatomical issue is, Jonathan?"
Oct 21
John replied to Jonathan's discussion ResMed AirSense 10 getting noisy
"Can't say I know about this."
Oct 20
John replied to John's discussion evil mask noise
"So I tore some fabric from one of the filters and glued it over the holes - and it worked!It was dead quiet, and the air was still flowing freely.It was quiet all night then after a few hours a bit of whistling until I gave it a wipe.Vast…"
Oct 19
John replied to John's discussion evil mask noise
"Hi Jonathan, well see my nose is blocked a lot, so I mouth breath which really sucks a lot more moisture and makes my mouth dry. So I put humidity on maximum, which makes for condensation at the mask end, which becomes a demonic reed instrument.Now…"
Oct 17
Jonathan posted a discussion

ResMed AirSense 10 getting noisy

HelloI have an NHS issued ResMed AirSense 10 with heated humidifier.  In the last couple of weeks, it's developed an annoying noise, when I inhale. It bothers me a little and my partner a lot! I sometimes get problems if the water container in the…See More
Oct 16
Jonathan replied to John's discussion evil mask noise
"Hi My first question is why is condensation forming?  I very occasionally get some condensation, may be once a month, but I can quickly run a finger around the inside of the mask, and wipe it away.  I use a nasal mask, with the humidifier…"
Oct 16
John replied to John's discussion What's a good Apnea forum?
"11K+? Ok that's probably where I should look then :-)"
Oct 16
Kath Hope replied to John's discussion What's a good Apnea forum?
"Hi John. Thanks for the compliment as I do my best popping on here, but it's difficult due to us now supporting 25k+ patients at the charity. To be honest, the forum is quiet because most people seem to prefer Facebook and forums aren't as…"
Oct 16
John posted discussions
Oct 16
Jonathan replied to John's discussion Has anyone been told root cause of their OSA?
"There's some information here, but generally it's very common and likely due to our anatomy."
Oct 12

© 2024   Created by The SleepGuide Crew.   Powered by

Badges  |  Report an Issue  |  Terms of Service