Hope2SleepGuide

Sleep Apnoea Forum Bringing Help + Support to the Patient

Since about the end of July Ive started having a lot more leaks from a total leaks of 45 to 84 since July even though I clean & degrease the mask daily and  there are no rips in the cushion.

Also my AH has gone up as well from av 1.51 to 3.61 in the same period. My clinic has a policy of only allowing one mask per year. My  yearly appt is in Nov so they should give me a new mask then so it looks like I shall have to wait till then before my AHI drops again unless I buy a new mask which I'm loath to do at present.

Views: 130

Reply to This

Replies to This Discussion

David, do you use maskliners and have the hose coming from above your head? They have been the most beneficial things for me with leaks. I use a Resmed FFM and have had it for 18 months without changing it with little leaks. Our system in Australia is different, we have to pay for pretty much evrything ourselves so we need them to last as long as possible. With the mask liners, i only wash the mask twice a week and the liners keep the oil from my face from touching the cushion which I think has made it last longer.

Hi Terry

I dont use liners but kath has just sent me a couple to try but not done so yet. Ive been using a hose lift for several months though. Ive got a Respironics full fit mask. as I said above its been fine for 8 months but now leaking a lot. The wife is complaining with all the farting noises waking her up!!!!!

My yearly appt is Nov so hopefully get a new one. If not I'll have to have Santa bring me one.

Do the straps need a bit of adjusting, there is a cheaper alternative to liners nit sure if you have seen my previous posts on it, if not I'll re post.

 

Adapted, with publisher's permission, from Chapter 3 of ‘CPAP and Ventilator Secrets’

  • The mask should be snug on your face, but not tight.
  • Check that your straps are the correct size for you
  • If an air leak occurs, gently tighten the straps but don’t make them too tight. This can actually make things worse - if a strap is too tight it will make the opposite side of the mask lift up slightly, and this will cause yet another leak. If adjusting the straps doesn’t work, lift the mask slightly off your face and then reposition it.
  • Don’t put face cream on the skin under your mask at bedtime as this can interfere with the seal and cause leaks.
  • Check that your mask and tubing have no splits or punctures.
  • If you’ve had your mask for a while it may need to be replaced.
  • Check the fastenings on straps and head-gear - they do deteriorate over time, especially if washed in the washing machine, and they may be slipping during the night
  • Leaks can be caused by the weight of the hose pulling on the mask and dislodging it. Using a Hose-Lift usually helps this.

           You may find that your pillow dislodges or distorts the mask when you lay on your side.
           Special pillows have been designed to be compatible with wearing a mask.
           Ask Kath at Hope2Sleep about them.

 

David, bearing in mind you had no problems until just recently, I'm sure it's just because you are well and truly ready for a new mask/cushion.  If we were in the US with Medicare Insurance you wouldn't believe how often we'd get replacements parts!  Check out this link and watch the video http://www.cpaphelpdesk.com/cpap-supplies.html

I would ring the clinic and ask if they can see you asap.

When I used to use the masks with replaceable cushions I used to purchase the cushions and filters myself in between the annual clinic visits.  Thankfully, my FitLife cushion seems to last a lot longer, which is a good thing as the cushion and mask are all one unit - probably because it seals around the edge of the face.

Just to correct myself its the Comfort Full2 so you cant get sapre cushions. Thanks Kath I'll give them a ring and see if I can bring my appt forward.

Ive tried straps tight & loose always fiddling when its leaking, I wash my face just before bed & the mask is degreased so its got to be the mask.

It's definitely replacement time David, and am sure your clinic will bring your appointment forward.  This is why it's good more manufacturers are bringing out masks with replacement parts, to cut down the cost of a new mask.  I've not had a new Hybrid for years, as I just replace the pillows, mouth piece and straps as and when.

Reply to Discussion

RSS

Sleep Apnoea Forum

New to the Sleep Apnoea Forum? 

1. Stop by our Sleep Apnoea Welcome Center to introduce yourself to the SleepGuide community.
2. Start a New Topic of Conversation.
3. Post your photos - of yourself, your old CPAP machine, your new CPAP machine, your pet, something about you!

Interested in advertising, have a problem or need to contact us? Click the Report an Issue page.

 

Latest Activity

Jonathan Lait is now a member of Hope2SleepGuide
Thursday
Becky Murkin replied to Becky Murkin's discussion F20 AirFit small marking bridge of nose
"no such luck getting F40 as was not in stock yet at the hospital. Tried the F30 but unfortunately my nose is so small that even the smallest mask is not small enough and leeks. Now trying out the Philips Dreamwear full mask/ Hybrid mask.  So…"
Thursday
Becky Murkin posted a discussion

mask "whiskers" marks

Hello lovely wise people,How do you prevent/ remove marks (indents) on your face left by mask for hours later. I call them my "whiskers". Still experimenting trying to loosen mask straps but keeping the seal.Using my Xylimelts at night for dry mouth…See More
Thursday
Becky Murkin replied to Becky Murkin's discussion F20 AirFit small marking bridge of nose
"I have an appointment with my NHS Respiratory physio team on Friday and will plead my case for an F30 or F40. They said to me last week they did not have f40 in as yet however they are soon to see resmed rep any day now."
May 7
Judy posted a discussion

Headgear tips please

Hi, this is a rather trivial question, and apologies if it isn't appropriate for this forum, but I’m hoping someone might have some tips.I use the Resmed N20 mask. I also dye my white hair roots with a decent brand (as it would take several years to…See More
May 6
Judy updated their profile
May 6
Jonathan replied to Iain Noble's discussion Resmed Airfit F20 Woes
"Hi.  No first hand experience, but you can see reviews here, which are mixed: https://www.cpap.com/productpage/resmed-airfit-f40-full-face-cpap-mask I notice cpap.com still appear to be selling the Quattro FX.  I have imported stuff from…"
Apr 28
Iain Noble posted a discussion

Resmed Airfit F20 Woes

Dear FolksI have been using the Resmed Quattro FX mask ever since I was diagnosed over 7 years ago.…See More
Apr 28
Iain Noble replied to Becky Murkin's discussion F20 AirFit small marking bridge of nose
"Hi All I can say is I feel your pain! I got the F20 as a replacement this year and it is very uncomfortable. I have just ordered the new Resmed F40 which is very small and light and so far it has been a lot easier to use for a mouth breather that…"
Apr 28
Sarah Martin is now a member of Hope2SleepGuide
Apr 27
jjimjam updated their profile
Apr 17
Kath Hope replied to Becky Murkin's discussion noisy humidifier normal?
"It sounds like you're getting rainout issues (condensation) so here's an article to help with this. www.hope2sleep.co.uk/water-in-the-mask-hose-known-as-rainout"
Apr 16
Becky Murkin posted a discussion

noisy humidifier normal?

Hello,I have an air sense 10 auto.When I have the humidifier and the heated tube plugged in it makes a sort of drumming noise. Like that at the gallows in films.Is this normal? It wakes me up  and I have to give up and switch off  for the night.See More
Apr 16
John posted a discussion

Dentists in Hull that know about Mewing ?

I was wondering if there are any dentists in Hull who know about John & Mike Mew, and changing jaw shape over time?I could add that I saw an ENT consultant recently and she said jaw shape, malocclusion, is genetic, which has become a debatable…See More
Apr 9
Profile IconKaren Mcleod, Fiona Watson, Teresa Hobbs and 5 more joined Hope2SleepGuide
Apr 3
Jonathan replied to John's discussion Airsense 10 -humidifier runs dry
"I did replace the tank in my SleepCube, and had to regularly take the silicone sealing gasket out and give it a goof clean, but not infrequently found it standing in a pool of water in the morning.  The machine sat on a tray because of…"
Mar 26
John posted a discussion

Nasal valve collapse

Does anyone have any experience of nasal valve collapse?Wondering if I have this but I don't know what the norm is.Been trying widgets that hold the nose open and it's like night and day.See More
Mar 24
John replied to John's discussion Airsense 10 -humidifier runs dry
"Wow it's the other way round for me.I found with the Sleepcube I'd often have a good bit of water still there in the morning. Today I woke up with a dry tank on the Resmed again and it's not on full heat or flow. I got it on 6…"
Mar 24
Becky Murkin posted a discussion

F20 AirFit small marking bridge of nose

Please help or give advice all wise people on here.I have had the Resmed F20 AirFit small mask for over a month. Seals yet…See More
Mar 19
Frances Knight replied to Frances Knight's discussion Air Sense 10 - changing pressure settings
"A very helpful reply Jonathan. I found the pressure setting for the full face mask to be too high when I changed to a nasal mask, but perhaps I should have persisted? I'll try again and I'll also discuss with the clinic whether an APAP…"
Mar 13

© 2024   Created by The SleepGuide Crew.   Powered by

Badges  |  Report an Issue  |  Terms of Service