"Just to tidy this up, I finally had an in-person review by my sleep clinic yesterday, who agreed the ResMed AirSense 10 was "wheezy" and replaced the machine."
Sleep Apnoea Forum Bringing Help + Support to the Patient
Leaks affecting AHI
Since about the end of July Ive started having a lot more leaks from a total leaks of 45 to 84 since July even though I clean & degrease the mask daily and there are no rips in the cushion.
Also my AH has gone up as well from av 1.51 to 3.61 in the same period. My clinic has a policy of only allowing one mask per year. My yearly appt is in Nov so they should give me a new mask then so it looks like I shall have to wait till then before my AHI drops again unless I buy a new mask which I'm loath to do at present.
Views: 138
Replies to This Discussion
-
Permalink Reply by Terry Vella on
-
David, do you use maskliners and have the hose coming from above your head? They have been the most beneficial things for me with leaks. I use a Resmed FFM and have had it for 18 months without changing it with little leaks. Our system in Australia is different, we have to pay for pretty much evrything ourselves so we need them to last as long as possible. With the mask liners, i only wash the mask twice a week and the liners keep the oil from my face from touching the cushion which I think has made it last longer.
-
Permalink Reply by David on
-
Hi Terry
I dont use liners but kath has just sent me a couple to try but not done so yet. Ive been using a hose lift for several months though. Ive got a Respironics full fit mask. as I said above its been fine for 8 months but now leaking a lot. The wife is complaining with all the farting noises waking her up!!!!!
My yearly appt is Nov so hopefully get a new one. If not I'll have to have Santa bring me one.
-
-
Do the straps need a bit of adjusting, there is a cheaper alternative to liners nit sure if you have seen my previous posts on it, if not I'll re post.
-
Permalink Reply by Marion@As I Live and Breathe on
-
Adapted, with publisher's permission, from Chapter 3 of ‘CPAP and Ventilator Secrets’
- The mask should be snug on your face, but not tight.
- Check that your straps are the correct size for you
- If an air leak occurs, gently tighten the straps but don’t make them too tight. This can actually make things worse - if a strap is too tight it will make the opposite side of the mask lift up slightly, and this will cause yet another leak. If adjusting the straps doesn’t work, lift the mask slightly off your face and then reposition it.
- Don’t put face cream on the skin under your mask at bedtime as this can interfere with the seal and cause leaks.
- Check that your mask and tubing have no splits or punctures.
- If you’ve had your mask for a while it may need to be replaced.
- Check the fastenings on straps and head-gear - they do deteriorate over time, especially if washed in the washing machine, and they may be slipping during the night
- Leaks can be caused by the weight of the hose pulling on the mask and dislodging it. Using a Hose-Lift usually helps this.
You may find that your pillow dislodges or distorts the mask when you lay on your side.
Special pillows have been designed to be compatible with wearing a mask.
Ask Kath at Hope2Sleep about them.
-
Permalink Reply by Kath Hope on
-
David, bearing in mind you had no problems until just recently, I'm sure it's just because you are well and truly ready for a new mask/cushion. If we were in the US with Medicare Insurance you wouldn't believe how often we'd get replacements parts! Check out this link and watch the video http://www.cpaphelpdesk.com/cpap-supplies.html
I would ring the clinic and ask if they can see you asap.
When I used to use the masks with replaceable cushions I used to purchase the cushions and filters myself in between the annual clinic visits. Thankfully, my FitLife cushion seems to last a lot longer, which is a good thing as the cushion and mask are all one unit - probably because it seals around the edge of the face.
-
-
Just to correct myself its the Comfort Full2 so you cant get sapre cushions. Thanks Kath I'll give them a ring and see if I can bring my appt forward.
Ive tried straps tight & loose always fiddling when its leaking, I wash my face just before bed & the mask is degreased so its got to be the mask.
-
-
It's definitely replacement time David, and am sure your clinic will bring your appointment forward. This is why it's good more manufacturers are bringing out masks with replacement parts, to cut down the cost of a new mask. I've not had a new Hybrid for years, as I just replace the pillows, mouth piece and straps as and when.
About
Sleep Apnoea Forum
New to the Sleep Apnoea Forum?
1. Stop by our Sleep Apnoea Welcome Center to introduce yourself to the SleepGuide community.
2. Start a New Topic of Conversation.
3. Post your photos - of yourself, your old CPAP machine, your new CPAP machine, your pet, something about you!
Interested in advertising, have a problem or need to contact us? Click the Report an Issue page.
Latest Activity
"thank you jonathan,i did get the it pack so tried the small and still struggled but i was sat up in bed so will try lying down great suggestion "
"Hi
My first thought is "don't panic"! We're all a bit different, and there are many things that can be tweaked. I took to CPAP therapy like a duck to water, but I've had friends who say they can't cope, but…"
1st time and I’ve failed the mask leak test
Hi everyone, today I received my rental kit - prisma smart max, plus a Philips dreamwear mask which I’ve been wearing unconnected to try and get used to it. I just did a mask fit test using a medium mask and got a constant red/orange leak warning…See More
Are every small CPAP machines any good?
Travel sized, micro - any good?See More
"Ha well it lasted a couple of days but started howling again. But it's a step in the right direction, just needs a bit more work."
"Nope, I just accept that some people's throats tend to close when they sleep, due to a loss of muscle tone during deeper sleep. Back when I was diagnosed, the sleep lab just filmed you whilst you slept, stuck an O2 meter on your finger,…"
"Did anyone tell you exactly what the anatomical issue is, Jonathan?"
"Can't say I know about this."
"So I tore some fabric from one of the filters and glued it over the holes - and it worked!It was dead quiet, and the air was still flowing freely.It was quiet all night then after a few hours a bit of whistling until I gave it a wipe.Vast…"
"Hi Jonathan, well see my nose is blocked a lot, so I mouth breath which really sucks a lot more moisture and makes my mouth dry. So I put humidity on maximum, which makes for condensation at the mask end, which becomes a demonic reed instrument.Now…"
ResMed AirSense 10 getting noisy
HelloI have an NHS issued ResMed AirSense 10 with heated humidifier. In the last couple of weeks, it's developed an annoying noise, when I inhale. It bothers me a little and my partner a lot! I sometimes get problems if the water container in the…See More
"Hi
My first question is why is condensation forming? I very occasionally get some condensation, may be once a month, but I can quickly run a finger around the inside of the mask, and wipe it away. I use a nasal mask, with the humidifier…"
"11K+? Ok that's probably where I should look then :-)"
"Hi John. Thanks for the compliment as I do my best popping on here, but it's difficult due to us now supporting 25k+ patients at the charity. To be honest, the forum is quiet because most people seem to prefer Facebook and forums aren't as…"
"There's some information here, but generally it's very common and likely due to our anatomy."
© 2024 Created by The SleepGuide Crew.
Powered by
