Hope2SleepGuide

Sleep Apnoea Forum Bringing Help + Support to the Patient

Over the last week I have had two power cuts at home.  The first one only lasted for two hours and the second one (today) lasted for 7 hours...brrrrrr just starting to heat up now :)  The power cuts took place during the day which was fortunate but I was quite concerned as to whether I would be able to use my CPAP machine should the power cuts have continued over night.   I began to think about what I should do sleep wise and decided the best course of action would be to sleep on a comfy chair or in bed with a stack of pillows to ensure my airway stayed open.  

 

What would you do in this situation?  It is quite concerning when you are so reliant on CPAP.

 

Thanks

 

Julie

 

HAPPY NEW YEAR TO ALL!!

Views: 966

Reply to This

Replies to This Discussion

I found a "tennis ball shirt" and gave it a try at one point. It was incredibly uncomfortable. It had a pocket in the back and you put a ball into it. (I think it was one of those plastic balls like you find in a ball pool and not actually a tennis ball) but although it kept me from sleeping on my back it was truly horrible.

Not having electricity is scary but upright sleeping sounds sensible to me too. I used to sleep strapped into my car in the car park before going in to work before I was diagnosed and this was the best sleep I ever got. I don't think I fancy sleeping in the car when it is this cold though!

Long live the springtime and the storms ending.

Rosemary

 

Funny I was just thinking about this today as our lights have been flickering on and off most of the day...they seem to have stopped at the moment and it has calmed down a bit outside so I'm keeping my fingers crossed that we are all in the safe zone here at the minute.  I am in central Scotland and in some ways for once, we have been really lucky...our weather has not been as bad as the rest of Scotland, although I am fed up of rain, rain and more rain :Thank you all for your suggestions...if power goes out, think might just sleep in chair :)

It will be interesting to know what your electric company say Vera, especially for the US members on here. 

Vera said:

I just  found this page. I am debating on whether to notify the electric company in my area or not. I thought that you all might like the information about power outages. Their other info on this page is quite good too. http://smart-sleep-apnea.blogspot.com/2011/12/everyday-cpap-safety....

..

LOL..thats sooo true, i wake up and think ohh nooo,its not working,but it really is,u defo do get used to it...Honest!! :)


 
Kath Hope said:

I've been know to forget to press the start button too on occasions LOL.  However, my machine's now set to start automatically when I put the mask on (one less thing to think about at bedtime). 

Interestingly, once I got used to CPAP there were occasions that I actually thought the machine wasn't switched on, but when pulling the mask away from my face to check I realized it was.  Amazing how our bodies get used to all that air blowing.  Newbies to CPAP won't believe this just yet, but they will soon :)

Here's some useful info from UK Power Network:

UK Power Networks wants to hear of your medical needs

 If you live in the East of England, South East or London, your electricity will be delivered by UK Power Networks regardless of who you pay your energy bill to.

The company keeps the lights on for about 8million customers and invests in and maintains the electricity network to help ensure reliable power supplies.

 However occasional faults and damage can unfortunately still cause power cuts.

 UK Power Networks runs a Priority Services Register and if you depend on electricity for medical needs, you should add your name to the register so that the company is aware of your situation.  Anyone who is dependant on medical equipment, chronically sick, disabled or has another special need can apply to be on the Register.

 Staff will not necessarily be able to restore your power any sooner if they have your details, but they can offer you extra help; phoning to let you know what the problem is, advising you of updates and the predicted restoration time, and arranging for British Red Cross volunteers to visit you at home and provide practical help such as hot drinks, torches and sometimes transport.

You will also be given a special hotline number to call UK Power Networks on.

If the company has to interrupt your power supply to carry out planned maintenance on the network, it will give you at least five days notice so that you can make alternative arrangements if necessary.

 Head of customer services Matt Rudling said: “We will always work to restore power as quickly as is safely possible, as we do not want to see our customers inconvenienced if we can help it.

 “It’s difficult for anybody during a power cut but it must be especially worrying if you are reliant on electricity for medical equipment, or have other special needs, so we want to understand your problems and try to help wherever we can.

Please do let us know if you would like to be on the Register.”

 

To request an application form please call UK Power Networks on 0800 169 9970

More details about UK Power Network’ priority services are available at www.ukpowernetworks.co.uk and if you live in a different area please contact the electricity company which delivers power to you to see if they provide a similar service.

 

If you have a medical condition or rely on medical equipment which would be severely affected by a power cut please discuss your concerns and needs with your carer, district nurse, doctor or social worker etc, so that you can produce a personal emergency plan to cope with a power cut.

Your personal emergency plan should always include calling the power cut emergency line to let them know that you are without power.

 

This is the sort of information sharing that is of so much help to people. Thank you so much for posting this.

Rosemary Kemp

I'm already on Eon's regaister but will contact these guys too as they may over-ride the others.

Thanks for sharing.

I am very new to CPAP and these ar the sort of things that were concerning me.

thanks

roz xx

This is a common problem with computers and the solution is an 'uninterruptible power supply' - UPS. These are generally of low capacity so will only work for a shortish power cut but have the advantage of being relatively cheap - here's a link:-

http://www.ebuyer.com/store/Servers/cat/UPS

Even the smaller ones by my reckoning could give you an hour of use before shutting down and can often be configured via your PC before use. I'll do some sums and see if I can't come up with a specific recommendation.

Hi All,

I have e-mailed "Respironics" regrading their battery power system, and will confirm their answer later.

They advertise the following on their website:

DC Battery Adapter Cable
Reorder # 532209


Operating Instructions

The DC Battery Adapter Cable, when connected to either the DC Interface Module or the DC Cord, enables Respironics’ CPAP and Bi-level Systems to be operated from a 12 VDC deep cycle marine-type battery.

CAUTION: DO NOT connect the cable to a battery that is installed in a vehicle or has any
additional equipment connected to it.


Respironics recommends a fully-charged 100 A-hour 12 VDC deep cycle marine-type battery to operate your Respironics System. Use of a battery rated less than 100 A-hours may reduce the length of operation.

DC Battery Adapter Cable

CONNECTIONS:

WARNING: When connecting the battery adapter cable to a battery:
• The black clamp must always be connected to the negative post and the red clamp must always
be connected to the positive post of the battery.
• DO NOT allow the clamps to come into contact with each other.
• DO NOT allow both clamps to come into contact with the same battery post.
• DO NOT allow loose fitting metal jewelry to touch the battery posts while you are connecting the
cable.
• Always disconnect the cables from the battery and the unit before moving the equipment.
• Not for use in a mobile environment.

Step 1 Connect the Battery Adapter Cable clamps to a free-standing 12 VDC battery as shown.
Red Clamp - Positive Post
Black Clamp - Negative Post

Step 2 Connect the adapter end of the cable to the cigarette lighter plug of either the DC Interface Module
or the DC Cord.

WARNING: The Respironics DC Battery Adapter Cable is designed for use with Respironics products
only. This cable is not recommended or warranted for any other applications. Replace any
damaged or frayed cables immediately.

CAUTION: The fuse holder contains a 15 amp automotive type fuse. Replacement fuses can be purchased
at any automotive parts store. To maintain over-current protection, replace the fuse with the
same type and rating.

Their site is

http://cflex.respironics.com/

100AHr battery is HUGE. The S8 Escape power consumption is said to be 34VA (watts if you like but not the same thing) so if you were using a converter or UPS assuming a poor efficiency meaning consumption of 70 watts (50% efficiency) which is roughly 6 Amps from a 12V battery then 100 A-hour battery would give at least 16 hours of run time. The longest power cut I can remember in recent history my area (Lancs) was 4 hours!

Anyway, going back to the UPS units - my small unit has a 7Ahr battery so that should give a run-time of 1.5 hours (7x12v=84va, almost 3 lots of 34VA the power consumption) so while the theory says about 2.5 hours, 1.5 is probably more realistic. So I'd still suggest this is probably a much cheaper alternative to the 'official' equipment.

http://www.ebuyer.com/65711-apc-back-ups-cs-650-ac-230v-400w-650va-...

is £90 with free delivery and would probably do the trick.

Hi Caveman,

I believe the commercial unit offered by the manufacturer of our machines is looking to offer a solution to more than just an hour or two during a short power cut.

Perhaps the camping, caravan, boat users where a system that can cope with two or three days away from a wall socket rather than an hour at home.

Most may all ready own a standard "Leisure" battery or have a 12vDC wired system in their caravan, the cable offered simply allows the use of a standard cigar lighter plug, available nationally, to power our night machines.

A standard car battery would offer quite a few hours, but please heed the warning about being in a stable location and not having other electrical loads attached at the same time as this would affect the running time.

As with most electrical items please seek professional or qualified advice if you are at all concerned about it.

Reply to Discussion

RSS

Sleep Apnoea Forum

New to the Sleep Apnoea Forum? 

1. Stop by our Sleep Apnoea Welcome Center to introduce yourself to the SleepGuide community.
2. Start a New Topic of Conversation.
3. Post your photos - of yourself, your old CPAP machine, your new CPAP machine, your pet, something about you!

Interested in advertising, have a problem or need to contact us? Click the Report an Issue page.

 

Latest Activity

Jonathan replied to Jonathan's discussion ResMed AirSense 10 getting noisy
"Just to tidy this up, I finally had an in-person review by my sleep clinic yesterday, who agreed the ResMed AirSense 10 was "wheezy" and replaced the machine."
Nov 9
Collette rose replied to Collette rose's discussion 1st time and I’ve failed the mask leak test
"thank you jonathan,i did get the it pack so tried the small and still struggled but i was sat up in bed so will try lying down great suggestion "
Nov 3
Jonathan replied to Collette rose's discussion 1st time and I’ve failed the mask leak test
"Hi My first thought is "don't panic"!  We're all a bit different, and there are many things that can be tweaked.  I took to CPAP therapy like a duck to water, but I've had friends who say they can't cope, but…"
Nov 2
Collette rose posted a discussion

1st time and I’ve failed the mask leak test

Hi everyone, today I received my rental kit - prisma smart max, plus a Philips dreamwear mask which I’ve been wearing unconnected to try and get used to it. I just did a mask fit test using a medium mask and got a constant red/orange leak warning…See More
Nov 2
Collette rose is now a member of Hope2SleepGuide
Oct 31
John posted a discussion
Oct 30
Profile IconBill Wright, Nicole Watson, TJ Bennett and 2 more joined Hope2SleepGuide
Oct 29
John replied to John's discussion evil mask noise
"Ha well it lasted a couple of days but started howling again. But it's a step in the right direction, just needs a bit more work."
Oct 24
Jonathan replied to John's discussion Has anyone been told root cause of their OSA?
"Nope, I just accept that some people's throats tend to close when they sleep, due to a loss of muscle tone during deeper sleep.  Back when I was diagnosed, the sleep lab just filmed you whilst you slept, stuck an O2 meter on your finger,…"
Oct 24
Jonathan replied to John's discussion evil mask noise
"Good to know you found a solution!"
Oct 24
John replied to John's discussion Has anyone been told root cause of their OSA?
"Did anyone tell you exactly what the anatomical issue is, Jonathan?"
Oct 21
John replied to Jonathan's discussion ResMed AirSense 10 getting noisy
"Can't say I know about this."
Oct 20
John replied to John's discussion evil mask noise
"So I tore some fabric from one of the filters and glued it over the holes - and it worked!It was dead quiet, and the air was still flowing freely.It was quiet all night then after a few hours a bit of whistling until I gave it a wipe.Vast…"
Oct 19
John replied to John's discussion evil mask noise
"Hi Jonathan, well see my nose is blocked a lot, so I mouth breath which really sucks a lot more moisture and makes my mouth dry. So I put humidity on maximum, which makes for condensation at the mask end, which becomes a demonic reed instrument.Now…"
Oct 17
Jonathan posted a discussion

ResMed AirSense 10 getting noisy

HelloI have an NHS issued ResMed AirSense 10 with heated humidifier.  In the last couple of weeks, it's developed an annoying noise, when I inhale. It bothers me a little and my partner a lot! I sometimes get problems if the water container in the…See More
Oct 16
Jonathan replied to John's discussion evil mask noise
"Hi My first question is why is condensation forming?  I very occasionally get some condensation, may be once a month, but I can quickly run a finger around the inside of the mask, and wipe it away.  I use a nasal mask, with the humidifier…"
Oct 16
John replied to John's discussion What's a good Apnea forum?
"11K+? Ok that's probably where I should look then :-)"
Oct 16
Kath Hope replied to John's discussion What's a good Apnea forum?
"Hi John. Thanks for the compliment as I do my best popping on here, but it's difficult due to us now supporting 25k+ patients at the charity. To be honest, the forum is quiet because most people seem to prefer Facebook and forums aren't as…"
Oct 16
John posted discussions
Oct 16
Jonathan replied to John's discussion Has anyone been told root cause of their OSA?
"There's some information here, but generally it's very common and likely due to our anatomy."
Oct 12

© 2024   Created by The SleepGuide Crew.   Powered by

Badges  |  Report an Issue  |  Terms of Service