Hope2SleepGuide

Sleep Apnoea Forum Bringing Help + Support to the Patient

Hi

I have been using a philips CPAP machine  for about four months and my AHI has been anything from 0.3 to 2.6 but occasionally the 90% pressure drops from 9 to 8 and my AHI shouts up to about  5 and today to 8.7 is this normal? Mask fit is always 100%

Many Thanks

Views: 106

Reply to This

Replies to This Discussion

This can happen John when the default minimum pressure of 4 is set, which I stress does work for a lot of people, but sometimes clinics do raise that minimum pressure as if the pressure tends to run very low in between the apnoeas and then suddenly has to climb higher, sometimes it doesn't reach the maximum level it needs.  Hope this makes sense and you could speak with your clinic about this - especially if it's happening often and you're feeling negative daytime effects when the AHI is above 5.  Otherwise, those reading of 0.3 to 2.6 are excellent :)

Thanks for your reply Kath, I am not due for a hospital visit till October so I will see how he numbers go and contact them if it starts to creep up.

You're welcome John (my next appointment's October too as the May one got cancelled due to COVID).  Just one other little thought is that if it's only been occuring recently it could be that you're getting more nasal stuffiness due to either hayfever, allergies or warmer nights.  If this is the case then try to help the nasal stuffiness with something like Sterimar natural spray, or even a prescribed one from the GP.  Nasal strips also help enormously to open up the nasal passages, and if you can't get to Boots or similar easily, we have some latex-free ones at the charity on this link https://www.hope2sleep.co.uk/snoreeze-latex-free-nasal-strips.html

Reply to Discussion

RSS

Sleep Apnoea Forum

New to the Sleep Apnoea Forum? 

1. Stop by our Sleep Apnoea Welcome Center to introduce yourself to the SleepGuide community.
2. Start a New Topic of Conversation.
3. Post your photos - of yourself, your old CPAP machine, your new CPAP machine, your pet, something about you!

Interested in advertising, have a problem or need to contact us? Click the Report an Issue page.

 

Latest Activity

Nick Daniel replied to John's discussion Are every small CPAP machines any good?
"Yes, it does the job. I use a Powapacs Atom for portable power "
Wednesday
John replied to John's discussion Are every small CPAP machines any good?
"Hi Nick thanks. Does it do the job and could you camp with it?"
Wednesday
Nick Daniel posted a discussion

CPAP Total Face Mask

I was curious whether anyone has used the CPAP Total Face Masks and could pass on their observations? I've been using an Airfit F20 for years which is fine apart from the permanent red mark on the bridge of my nose, and have recently tried the…See More
Tuesday
Nick Daniel replied to John's discussion Are every small CPAP machines any good?
"I've been using the Resmed Airmini for about 5 years when travelling - overall lightweight and small and can be controlled by an App, but it does produce a loud whistling/wind sound for me which hasn't been reduced by an inline filter or…"
Tuesday
Greg Lloyd is now a member of Hope2SleepGuide
Dec 6
Jonathan replied to David Hudson's discussion Pressure waking me up. Belching and wind
"Hi It sounds like you need to have more conversations with your sleep clinic.  There's little point in having a high pressure if it means you cannot tolerate the machine.  There's an interesting video here…"
Dec 1
David Hudson posted a discussion

Pressure waking me up. Belching and wind

HiI'm using the prisma smart max machine. Initially I was just on a nasal mask, this changed as I was sleeping with my mouth open. I then went to face and nose mask and complained of bad wind and belching. Sometimes the pressure in the night was…See More
Nov 28
Jonathan replied to Jonathan's discussion ResMed AirSense 10 getting noisy
"Just to tidy this up, I finally had an in-person review by my sleep clinic yesterday, who agreed the ResMed AirSense 10 was "wheezy" and replaced the machine."
Nov 9
Collette rose replied to Collette rose's discussion 1st time and I’ve failed the mask leak test
"thank you jonathan,i did get the it pack so tried the small and still struggled but i was sat up in bed so will try lying down great suggestion "
Nov 3
Jonathan replied to Collette rose's discussion 1st time and I’ve failed the mask leak test
"Hi My first thought is "don't panic"!  We're all a bit different, and there are many things that can be tweaked.  I took to CPAP therapy like a duck to water, but I've had friends who say they can't cope, but…"
Nov 2
Collette rose posted a discussion

1st time and I’ve failed the mask leak test

Hi everyone, today I received my rental kit - prisma smart max, plus a Philips dreamwear mask which I’ve been wearing unconnected to try and get used to it. I just did a mask fit test using a medium mask and got a constant red/orange leak warning…See More
Nov 2
Collette rose is now a member of Hope2SleepGuide
Oct 31
John posted a discussion
Oct 30
Profile IconBill Wright, Nicole Watson, TJ Bennett and 2 more joined Hope2SleepGuide
Oct 29
John replied to John's discussion evil mask noise
"Ha well it lasted a couple of days but started howling again. But it's a step in the right direction, just needs a bit more work."
Oct 24
Jonathan replied to John's discussion Has anyone been told root cause of their OSA?
"Nope, I just accept that some people's throats tend to close when they sleep, due to a loss of muscle tone during deeper sleep.  Back when I was diagnosed, the sleep lab just filmed you whilst you slept, stuck an O2 meter on your finger,…"
Oct 24
Jonathan replied to John's discussion evil mask noise
"Good to know you found a solution!"
Oct 24
John replied to John's discussion Has anyone been told root cause of their OSA?
"Did anyone tell you exactly what the anatomical issue is, Jonathan?"
Oct 21
John replied to Jonathan's discussion ResMed AirSense 10 getting noisy
"Can't say I know about this."
Oct 20
John replied to John's discussion evil mask noise
"So I tore some fabric from one of the filters and glued it over the holes - and it worked!It was dead quiet, and the air was still flowing freely.It was quiet all night then after a few hours a bit of whistling until I gave it a wipe.Vast…"
Oct 19

© 2024   Created by The SleepGuide Crew.   Powered by

Badges  |  Report an Issue  |  Terms of Service