Hope2SleepGuide

Sleep Apnoea Forum Bringing Help + Support to the Patient

Hi! I'm Brownie. I would like to know how can I find out how I'm doing within my therapy?

Views: 146

Reply to This

Replies to This Discussion

Hi there,

If your m/c has an SD card or a card that can be read by a standard card reader, you can use the sleepyhead software that can be obtained from http://sourceforge.net/projects/sleepyhead/

This will read all the data from your m/c and present it in a form that can be easily understood (mainly graphs)

Hope this is some help

Derek.

Hi Brownie, been waiting for you to post, download the software as per Dereks link and if you don't have a card reader, take your simcard from your machine and get one that fits. Make sure you put the simcard back in your machine. When you have done that let me know and I'll show you how to import the data onto your computer. Kath may need to help as I think she has the same machine as you, mine is a different brand. Good to have you on here. 

I hope you don't mind me joining in but after reading your posts I has a look and found my sd card. I won't be able to do anything silly like erase data by using the sleepyhead software wilI? I have a ResMed s9 escape.

Hello Judith,

It is highly unlikely that you will erase any data from your card, but to be on the safe side, SD cards have a small switch on the side which will write protect the card if you slide  the switch to the back. Some cards are marked with lock/unlock symbols but not all. Don't forget to set the card back to unlock before you reinstall it

Derek.

Thank you Derek, I have had a look but there is no data showing other than usage, session times and preAHIs, apnoeas or leakage. Must be the model that I have from the hospital. I found the switch to protect the card but don't think that I am actually going to need it afetr all but good to know about such things for saving data in future.

Judith - Unfortunately the Escape model won't show anything useful, other than usage and leaks :(

Brownie34 - Good to see your first post on here, and like Terry said, we're here to help so shout out if you get stuck :)

Judith-Ann, just checking are you talking about the data on your machine, I have a Resmed S9 Auto, which is the model above yours. I get that data but can see the data from the Simcard. The info you are getting is just as good, the AHI's are the most important figure are yours below 5. The Sleepyhead software is good if you want to analysis the data more with graphs etc.

As far as I know Terry, it's the 'Escape' that doesn't show the data - the S9 'Auto' and 'Elite' do though.  Someone correct me if I'm wrong though.

Terry Vella said:

Judith-Ann, just checking are you talking about the data on your machine, I have a Resmed S9 Auto, which is the model above yours. I get that data but can see the data from the Simcard. The info you are getting is just as good, the AHI's are the most important figure are yours below 5. The Sleepyhead software is good if you want to analysis the data more with graphs etc.

Brownie, did you get anywhere with the card reader?

Reply to Discussion

RSS

Sleep Apnoea Forum

New to the Sleep Apnoea Forum? 

1. Stop by our Sleep Apnoea Welcome Center to introduce yourself to the SleepGuide community.
2. Start a New Topic of Conversation.
3. Post your photos - of yourself, your old CPAP machine, your new CPAP machine, your pet, something about you!

Interested in advertising, have a problem or need to contact us? Click the Report an Issue page.

 

Latest Activity

Jonathan replied to Jonathan's discussion ResMed AirSense 10 getting noisy
"Just to tidy this up, I finally had an in-person review by my sleep clinic yesterday, who agreed the ResMed AirSense 10 was "wheezy" and replaced the machine."
Nov 9
Collette rose replied to Collette rose's discussion 1st time and I’ve failed the mask leak test
"thank you jonathan,i did get the it pack so tried the small and still struggled but i was sat up in bed so will try lying down great suggestion "
Nov 3
Jonathan replied to Collette rose's discussion 1st time and I’ve failed the mask leak test
"Hi My first thought is "don't panic"!  We're all a bit different, and there are many things that can be tweaked.  I took to CPAP therapy like a duck to water, but I've had friends who say they can't cope, but…"
Nov 2
Collette rose posted a discussion

1st time and I’ve failed the mask leak test

Hi everyone, today I received my rental kit - prisma smart max, plus a Philips dreamwear mask which I’ve been wearing unconnected to try and get used to it. I just did a mask fit test using a medium mask and got a constant red/orange leak warning…See More
Nov 2
Collette rose is now a member of Hope2SleepGuide
Oct 31
John posted a discussion
Oct 30
Profile IconBill Wright, Nicole Watson, TJ Bennett and 2 more joined Hope2SleepGuide
Oct 29
John replied to John's discussion evil mask noise
"Ha well it lasted a couple of days but started howling again. But it's a step in the right direction, just needs a bit more work."
Oct 24
Jonathan replied to John's discussion Has anyone been told root cause of their OSA?
"Nope, I just accept that some people's throats tend to close when they sleep, due to a loss of muscle tone during deeper sleep.  Back when I was diagnosed, the sleep lab just filmed you whilst you slept, stuck an O2 meter on your finger,…"
Oct 24
Jonathan replied to John's discussion evil mask noise
"Good to know you found a solution!"
Oct 24
John replied to John's discussion Has anyone been told root cause of their OSA?
"Did anyone tell you exactly what the anatomical issue is, Jonathan?"
Oct 21
John replied to Jonathan's discussion ResMed AirSense 10 getting noisy
"Can't say I know about this."
Oct 20
John replied to John's discussion evil mask noise
"So I tore some fabric from one of the filters and glued it over the holes - and it worked!It was dead quiet, and the air was still flowing freely.It was quiet all night then after a few hours a bit of whistling until I gave it a wipe.Vast…"
Oct 19
John replied to John's discussion evil mask noise
"Hi Jonathan, well see my nose is blocked a lot, so I mouth breath which really sucks a lot more moisture and makes my mouth dry. So I put humidity on maximum, which makes for condensation at the mask end, which becomes a demonic reed instrument.Now…"
Oct 17
Jonathan posted a discussion

ResMed AirSense 10 getting noisy

HelloI have an NHS issued ResMed AirSense 10 with heated humidifier.  In the last couple of weeks, it's developed an annoying noise, when I inhale. It bothers me a little and my partner a lot! I sometimes get problems if the water container in the…See More
Oct 16
Jonathan replied to John's discussion evil mask noise
"Hi My first question is why is condensation forming?  I very occasionally get some condensation, may be once a month, but I can quickly run a finger around the inside of the mask, and wipe it away.  I use a nasal mask, with the humidifier…"
Oct 16
John replied to John's discussion What's a good Apnea forum?
"11K+? Ok that's probably where I should look then :-)"
Oct 16
Kath Hope replied to John's discussion What's a good Apnea forum?
"Hi John. Thanks for the compliment as I do my best popping on here, but it's difficult due to us now supporting 25k+ patients at the charity. To be honest, the forum is quiet because most people seem to prefer Facebook and forums aren't as…"
Oct 16
John posted discussions
Oct 16
Jonathan replied to John's discussion Has anyone been told root cause of their OSA?
"There's some information here, but generally it's very common and likely due to our anatomy."
Oct 12

© 2024   Created by The SleepGuide Crew.   Powered by

Badges  |  Report an Issue  |  Terms of Service