Hope2SleepGuide

Sleep Apnoea Forum Bringing Help + Support to the Patient

Hi! I'm Brownie. I would like to know how can I find out how I'm doing within my therapy?

Views: 147

Reply to This

Replies to This Discussion

Hi there,

If your m/c has an SD card or a card that can be read by a standard card reader, you can use the sleepyhead software that can be obtained from http://sourceforge.net/projects/sleepyhead/

This will read all the data from your m/c and present it in a form that can be easily understood (mainly graphs)

Hope this is some help

Derek.

Hi Brownie, been waiting for you to post, download the software as per Dereks link and if you don't have a card reader, take your simcard from your machine and get one that fits. Make sure you put the simcard back in your machine. When you have done that let me know and I'll show you how to import the data onto your computer. Kath may need to help as I think she has the same machine as you, mine is a different brand. Good to have you on here. 

I hope you don't mind me joining in but after reading your posts I has a look and found my sd card. I won't be able to do anything silly like erase data by using the sleepyhead software wilI? I have a ResMed s9 escape.

Hello Judith,

It is highly unlikely that you will erase any data from your card, but to be on the safe side, SD cards have a small switch on the side which will write protect the card if you slide  the switch to the back. Some cards are marked with lock/unlock symbols but not all. Don't forget to set the card back to unlock before you reinstall it

Derek.

Thank you Derek, I have had a look but there is no data showing other than usage, session times and preAHIs, apnoeas or leakage. Must be the model that I have from the hospital. I found the switch to protect the card but don't think that I am actually going to need it afetr all but good to know about such things for saving data in future.

Judith - Unfortunately the Escape model won't show anything useful, other than usage and leaks :(

Brownie34 - Good to see your first post on here, and like Terry said, we're here to help so shout out if you get stuck :)

Judith-Ann, just checking are you talking about the data on your machine, I have a Resmed S9 Auto, which is the model above yours. I get that data but can see the data from the Simcard. The info you are getting is just as good, the AHI's are the most important figure are yours below 5. The Sleepyhead software is good if you want to analysis the data more with graphs etc.

As far as I know Terry, it's the 'Escape' that doesn't show the data - the S9 'Auto' and 'Elite' do though.  Someone correct me if I'm wrong though.

Terry Vella said:

Judith-Ann, just checking are you talking about the data on your machine, I have a Resmed S9 Auto, which is the model above yours. I get that data but can see the data from the Simcard. The info you are getting is just as good, the AHI's are the most important figure are yours below 5. The Sleepyhead software is good if you want to analysis the data more with graphs etc.

Brownie, did you get anywhere with the card reader?

Reply to Discussion

RSS

About

Sleep Apnoea Forum

New to the Sleep Apnoea Forum? 

1. Stop by our Sleep Apnoea Welcome Center to introduce yourself to the SleepGuide community.
2. Start a New Topic of Conversation.
3. Post your photos - of yourself, your old CPAP machine, your new CPAP machine, your pet, something about you!

Interested in advertising, have a problem or need to contact us? Click the Report an Issue page.

 

Latest Activity

Kath Hope replied to Glassdaisy's discussion Soft Cap
"It's very much still relevant and we're getting closer to have them manufactured and has been no easy challenge. In fact we were speaking with the company working with us on this only yesterday. If you're not on our newsletter list…"
Mar 27
Glassdaisy posted a discussion

Soft Cap

some time ago I was told that Hope2Sleep was researching a replacement for the discontinued Soft Cap.. as I have seen nothing to indicate moving forward on this, would I be right in assuming you decided it is no longer relevant?See More
Mar 27
Glassdaisy replied to Nick Daniel's discussion CPAP Total Face Mask
"I expect others may have responded by now, but I use the Fitlife full face mask. I kept getting a hard lump on my nose when first starting out & it got so bad that I ended up buying my own masks as my clinic would only give the Fitlife to new…"
Mar 27
Wendy Anthony is now a member of Hope2SleepGuide
Mar 25
David McDade is now a member of Hope2SleepGuide
Jan 3
Nick Daniel replied to John's discussion Are every small CPAP machines any good?
"Yes, it does the job. I use a Powapacs Atom for portable power "
Dec 18, 2024
John replied to John's discussion Are every small CPAP machines any good?
"Hi Nick thanks. Does it do the job and could you camp with it?"
Dec 18, 2024
Nick Daniel posted a discussion

CPAP Total Face Mask

I was curious whether anyone has used the CPAP Total Face Masks and could pass on their observations? I've been using an Airfit F20 for years which is fine apart from the permanent red mark on the bridge of my nose, and have recently tried the…See More
Dec 17, 2024
Nick Daniel replied to John's discussion Are every small CPAP machines any good?
"I've been using the Resmed Airmini for about 5 years when travelling - overall lightweight and small and can be controlled by an App, but it does produce a loud whistling/wind sound for me which hasn't been reduced by an inline filter or…"
Dec 17, 2024
Greg Lloyd is now a member of Hope2SleepGuide
Dec 6, 2024
Jonathan replied to David Hudson's discussion Pressure waking me up. Belching and wind
"Hi It sounds like you need to have more conversations with your sleep clinic.  There's little point in having a high pressure if it means you cannot tolerate the machine.  There's an interesting video here…"
Dec 1, 2024
David Hudson posted a discussion

Pressure waking me up. Belching and wind

HiI'm using the prisma smart max machine. Initially I was just on a nasal mask, this changed as I was sleeping with my mouth open. I then went to face and nose mask and complained of bad wind and belching. Sometimes the pressure in the night was…See More
Nov 28, 2024
Jonathan replied to Jonathan's discussion ResMed AirSense 10 getting noisy
"Just to tidy this up, I finally had an in-person review by my sleep clinic yesterday, who agreed the ResMed AirSense 10 was "wheezy" and replaced the machine."
Nov 9, 2024
Collette rose replied to Collette rose's discussion 1st time and I’ve failed the mask leak test
"thank you jonathan,i did get the it pack so tried the small and still struggled but i was sat up in bed so will try lying down great suggestion "
Nov 3, 2024
Jonathan replied to Collette rose's discussion 1st time and I’ve failed the mask leak test
"Hi My first thought is "don't panic"!  We're all a bit different, and there are many things that can be tweaked.  I took to CPAP therapy like a duck to water, but I've had friends who say they can't cope, but…"
Nov 2, 2024
Collette rose posted a discussion

1st time and I’ve failed the mask leak test

Hi everyone, today I received my rental kit - prisma smart max, plus a Philips dreamwear mask which I’ve been wearing unconnected to try and get used to it. I just did a mask fit test using a medium mask and got a constant red/orange leak warning…See More
Nov 2, 2024
Collette rose is now a member of Hope2SleepGuide
Oct 31, 2024
John posted a discussion
Oct 30, 2024
Profile IconBill Wright, Nicole Watson, TJ Bennett and 2 more joined Hope2SleepGuide
Oct 29, 2024
John replied to John's discussion evil mask noise
"Ha well it lasted a couple of days but started howling again. But it's a step in the right direction, just needs a bit more work."
Oct 24, 2024

© 2025   Created by The SleepGuide Crew.   Powered by

Badges  |  Report an Issue  |  Terms of Service